Add logs/dmesg_19.07.10.txt
This commit is contained in:
parent
c1babec514
commit
5dede2fb83
|
|
@ -0,0 +1,208 @@
|
|||
[ 0.000000] Linux version 4.14.275 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11427-9ce6aa9d8d)) #0 SMP Sat Apr 16 13:13:32 2022
|
||||
[ 0.000000] strap_override_bus = fffdffff
|
||||
[ 0.000000] Detected Broadcom 0x6318 CPU revision b0
|
||||
[ 0.000000] CPU frequency is 333 MHz
|
||||
[ 0.000000] 32MB of RAM installed
|
||||
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
|
||||
[ 0.000000] board_bcm963xx: CFE version: 55.46.50-55.51-46
|
||||
[ 0.000000] bootconsole [early0] enabled
|
||||
[ 0.000000] CPU0 revision is: 00029033 (Broadcom BMIPS3300)
|
||||
[ 0.000000] board: board name: F@ST2704N
|
||||
[ 0.000000] MIPS: machine is Sagem F@ST2704N
|
||||
[ 0.000000] Determined physical RAM map:
|
||||
[ 0.000000] memory: 02000000 @ 00000000 (usable)
|
||||
[ 0.000000] Initrd not found or empty - disabling initrd
|
||||
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
|
||||
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
|
||||
[ 0.000000] Zone ranges:
|
||||
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff]
|
||||
[ 0.000000] Movable zone start for each node
|
||||
[ 0.000000] Early memory node ranges
|
||||
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff]
|
||||
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
|
||||
[ 0.000000] On node 0 totalpages: 8192
|
||||
[ 0.000000] free_area_init_node: node 0, pgdat 8051fa80, node_mem_map 81005e40
|
||||
[ 0.000000] Normal zone: 64 pages used for memmap
|
||||
[ 0.000000] Normal zone: 0 pages reserved
|
||||
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
|
||||
[ 0.000000] random: get_random_bytes called from 0x80521738 with crng_init=0
|
||||
[ 0.000000] percpu: Embedded 14 pages/cpu s26768 r8192 d22384 u57344
|
||||
[ 0.000000] pcpu-alloc: s26768 r8192 d22384 u57344 alloc=14*4096
|
||||
[ 0.000000] pcpu-alloc: [0] 0
|
||||
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8128
|
||||
[ 0.000000] Kernel command line: rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
|
||||
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
|
||||
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
|
||||
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
|
||||
[ 0.000000] Memory: 25568K/32768K available (4410K kernel code, 199K rwdata, 568K rodata, 1340K init, 212K bss, 7200K reserved, 0K cma-reserved)
|
||||
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
|
||||
[ 0.000000] Hierarchical RCU implementation.
|
||||
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
|
||||
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
|
||||
[ 0.000000] NR_IRQS: 256
|
||||
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11479041721 ns
|
||||
[ 0.000023] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12897800188ns
|
||||
[ 0.008258] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
|
||||
[ 0.046666] pid_max: default: 32768 minimum: 301
|
||||
[ 0.051852] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
|
||||
[ 0.058713] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
|
||||
[ 0.071104] Hierarchical SRCU implementation.
|
||||
[ 0.077855] smp: Bringing up secondary CPUs ...
|
||||
[ 0.082619] smp: Brought up 1 node, 1 CPU
|
||||
[ 0.101770] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
|
||||
[ 0.111960] futex hash table entries: 256 (order: 2, 16384 bytes)
|
||||
[ 0.118525] pinctrl core: initialized pinctrl subsystem
|
||||
[ 0.127867] NET: Registered protocol family 16
|
||||
[ 0.379731] registering PCI controller with io_map_base unset
|
||||
[ 0.450944] PCI host bridge to bus 0000:00
|
||||
[ 0.455403] pci_bus 0000:00: root bus resource [mem 0x10200000-0x102fffff]
|
||||
[ 0.462520] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
|
||||
[ 0.469516] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
|
||||
[ 0.476514] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
|
||||
[ 0.484760] pci 0000:00:00.0: [14e4:6318] type 01 class 0x060400
|
||||
[ 0.484985] pci 0000:00:00.0: PME# supported from D0 D3hot
|
||||
[ 0.485543] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
|
||||
[ 0.494327] pci 0000:01:00.0: [14e4:a8db] type 00 class 0x028000
|
||||
[ 0.494452] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
|
||||
[ 0.494552] pci 0000:01:00.0: enabling Extended Tags
|
||||
[ 0.499893] pci 0000:01:00.0: supports D1 D2
|
||||
[ 0.500364] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
|
||||
[ 0.500408] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
|
||||
[ 0.500497] pci 0000:00:00.0: BAR 8: assigned [mem 0x10200000-0x102fffff]
|
||||
[ 0.507566] pci 0000:01:00.0: BAR 0: assigned [mem 0x10200000-0x10207fff 64bit]
|
||||
[ 0.515128] pci 0000:00:00.0: PCI bridge to [bus 01]
|
||||
[ 0.520242] pci 0000:00:00.0: bridge window [mem 0x10200000-0x102fffff]
|
||||
[ 0.539152] clocksource: Switched to clocksource MIPS
|
||||
[ 0.548577] NET: Registered protocol family 2
|
||||
[ 0.553632] IP idents hash table entries: 2048 (order: 2, 16384 bytes)
|
||||
[ 0.562774] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
|
||||
[ 0.570087] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
|
||||
[ 0.576825] TCP: Hash tables configured (established 1024 bind 1024)
|
||||
[ 0.583755] UDP hash table entries: 256 (order: 1, 8192 bytes)
|
||||
[ 0.590072] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
|
||||
[ 0.597276] NET: Registered protocol family 1
|
||||
[ 0.602027] PCI: CLS 0 bytes, default 16
|
||||
[ 0.613724] Crashlog allocated RAM at address 0x1f00000
|
||||
[ 0.624507] workingset: timestamp_bits=30 max_order=13 bucket_order=0
|
||||
[ 0.644734] squashfs: version 4.0 (2009/01/31) Phillip Lougher
|
||||
[ 0.650865] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
|
||||
[ 0.700326] io scheduler noop registered
|
||||
[ 0.704597] io scheduler deadline registered (default)
|
||||
[ 0.713190] bcm6318-pinctrl 10000080.pin-controller: registered at mmio b0000080
|
||||
[ 0.723292] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
|
||||
[ 0.730537] 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 36, base_baud = 1562500) is a bcm63xx_uart
|
||||
[ 0.740446] console [ttyS0] enabled
|
||||
[ 0.747642] bootconsole [early0] disabled
|
||||
[ 0.787573] random: fast init done
|
||||
[ 0.793598] m25p80 spi1.0: s25fl064k (8192 Kbytes)
|
||||
[ 0.799520] 3 fixed-partitions partitions found on MTD device spi1.0
|
||||
[ 0.806203] Creating 3 MTD partitions on "spi1.0":
|
||||
[ 0.811195] 0x000000000000-0x000000010000 : "cfe"
|
||||
[ 0.818351] 0x000000010000-0x0000007f0000 : "linux"
|
||||
[ 0.830389] parser_imagetag: rootfs: CFE image tag found at 0x0 with version 6, board type F@ST2704N
|
||||
[ 0.840047] parser_imagetag: Partition 0 is kernel offset 100 and length 1a84ec
|
||||
[ 0.847614] parser_imagetag: Partition 1 is rootfs offset 1a85ec and length 637a14
|
||||
[ 0.855422] parser_imagetag: Spare partition is offset 430004 and length 3afffc
|
||||
[ 0.863051] 2 bcm963xx-imagetag partitions found on MTD device linux
|
||||
[ 0.869671] Creating 2 MTD partitions on "linux":
|
||||
[ 0.874552] 0x000000000100-0x0000001a85ec : "kernel"
|
||||
[ 0.881998] 0x0000001a85ec-0x0000007e0000 : "rootfs"
|
||||
[ 0.889254] mtd: device 3 (rootfs) set to be root filesystem
|
||||
[ 0.900136] 1 squashfs-split partitions found on MTD device rootfs
|
||||
[ 0.906801] 0x000000430000-0x0000007e0000 : "rootfs_data"
|
||||
[ 0.915041] 0x0000007f0000-0x000000800000 : "nvram"
|
||||
[ 0.968188] b53_common: found switch: BCM63xx, rev 0
|
||||
[ 0.974320] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
|
||||
[ 0.986125] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
|
||||
[ 0.992191] bcma-pci-bridge 0000:01:00.0: bus0: Found chip with id 43217, rev 0x01 and package 0x09
|
||||
[ 1.001626] bcma-pci-bridge 0000:01:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0)
|
||||
[ 1.012658] bcma-pci-bridge 0000:01:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
|
||||
[ 1.023793] bcma-pci-bridge 0000:01:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0)
|
||||
[ 1.034417] bcma_fallback_sprom: pci bus/device num mismatch: expected 0/0, but got 1/0
|
||||
[ 1.064550] bcma-pci-bridge 0000:01:00.0: bus0: Bus registered
|
||||
[ 1.073890] NET: Registered protocol family 10
|
||||
[ 1.088310] Segment Routing with IPv6
|
||||
[ 1.092452] NET: Registered protocol family 17
|
||||
[ 1.097255] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
|
||||
[ 1.110688] 8021q: 802.1Q VLAN Support v1.8
|
||||
[ 1.132625] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
|
||||
[ 1.169342] Freeing unused kernel memory: 1340K
|
||||
[ 1.174081] This architecture does not have kernel memory protection.
|
||||
[ 2.368893] init: Console is alive
|
||||
[ 2.373283] init: - watchdog -
|
||||
[ 4.373640] kmodloader: loading kernel modules from /etc/modules-boot.d/*
|
||||
[ 4.592564] usbcore: registered new interface driver usbfs
|
||||
[ 4.598708] usbcore: registered new interface driver hub
|
||||
[ 4.604471] usbcore: registered new device driver usb
|
||||
[ 4.633024] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
||||
[ 4.644318] ehci-platform: EHCI generic platform driver
|
||||
[ 4.754745] ehci-platform ehci-platform: EHCI Host Controller
|
||||
[ 4.760837] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
|
||||
[ 4.769567] ehci-platform ehci-platform: irq 50, io mem 0xb0005000
|
||||
[ 4.790685] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
|
||||
[ 4.801572] hub 1-0:1.0: USB hub found
|
||||
[ 4.806547] hub 1-0:1.0: 1 port detected
|
||||
[ 4.825118] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
|
||||
[ 4.835737] ohci-platform: OHCI generic platform driver
|
||||
[ 4.841639] ohci-platform ohci-platform: Generic Platform OHCI controller
|
||||
[ 4.848847] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
|
||||
[ 4.857337] ohci-platform ohci-platform: irq 49, io mem 0xb0005100
|
||||
[ 4.929272] hub 2-0:1.0: USB hub found
|
||||
[ 4.934270] hub 2-0:1.0: 1 port detected
|
||||
[ 4.943284] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
|
||||
[ 4.962061] init: - preinit -
|
||||
[ 5.923381] usb 2-1: new full-speed USB device number 2 using ohci-platform
|
||||
[ 6.400065] random: procd: uninitialized urandom read (4 bytes read)
|
||||
[ 7.073169] random: jshn: uninitialized urandom read (4 bytes read)
|
||||
[ 7.336117] random: jshn: uninitialized urandom read (4 bytes read)
|
||||
[ 7.593360] random: jshn: uninitialized urandom read (4 bytes read)
|
||||
[ 7.710329] random: jshn: uninitialized urandom read (4 bytes read)
|
||||
[ 7.860186] random: jshn: uninitialized urandom read (4 bytes read)
|
||||
[ 8.494272] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
|
||||
[ 8.500979] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
|
||||
[ 8.509357] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
|
||||
[ 8.516219] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
|
||||
[ 9.490711] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
|
||||
[ 12.195404] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
|
||||
[ 12.202954] jffs2_build_filesystem(): unlocking the mtd device...
|
||||
[ 12.203130] done.
|
||||
[ 12.211509] jffs2_build_filesystem(): erasing all blocks after the end marker...
|
||||
[ 12.366821] random: crng init done
|
||||
[ 22.107782] done.
|
||||
[ 22.109815] jffs2: notice: (428) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
|
||||
[ 22.130602] mount_root: overlay filesystem has not been fully initialized yet
|
||||
[ 22.146474] mount_root: switching to jffs2 overlay
|
||||
[ 22.217290] overlayfs: upper fs does not support tmpfile.
|
||||
[ 23.185431] urandom-seed: Seed file not found (/etc/urandom.seed)
|
||||
[ 23.465723] procd: - early -
|
||||
[ 23.469144] procd: - watchdog -
|
||||
[ 23.768695] procd: cannot set group dialout for /dev/ttyS0 (getgrnam: 0)
|
||||
[ 24.281971] procd: - watchdog -
|
||||
[ 24.286079] procd: - ubus -
|
||||
[ 24.441909] procd: - init -
|
||||
[ 26.169591] kmodloader: loading kernel modules from /etc/modules.d/*
|
||||
[ 26.478001] ip6_tables: (C) 2000-2006 Netfilter Core Team
|
||||
[ 26.539538] Loading modules backported from Linux version v4.19.237-0-ga6e4a1818efa
|
||||
[ 26.547569] Backport generated by backports.git v4.19.237-1-0-gffb89fd9
|
||||
[ 26.584031] ip_tables: (C) 2000-2006 Netfilter Core Team
|
||||
[ 26.648252] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
|
||||
[ 26.976977] xt_time: kernel timezone is -0000
|
||||
[ 27.213423] urngd: v1.0.2 started.
|
||||
[ 27.455210] PPP generic driver version 2.4.2
|
||||
[ 27.481235] NET: Registered protocol family 24
|
||||
[ 27.608542] b43-phy0: Broadcom 43217 WLAN found (core revision 30)
|
||||
[ 27.650706] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17
|
||||
[ 27.657121] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 0
|
||||
[ 27.679499] Broadcom 43xx driver loaded [ Features: PNL ]
|
||||
[ 27.696380] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
|
||||
[ 27.867408] kmodloader: done loading kernel modules from /etc/modules.d/*
|
||||
[ 41.739313] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
|
||||
[ 52.551320] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
|
||||
[ 52.595577] br-lan: port 1(eth0.1) entered blocking state
|
||||
[ 52.601283] br-lan: port 1(eth0.1) entered disabled state
|
||||
[ 52.607693] device eth0.1 entered promiscuous mode
|
||||
[ 52.612767] device eth0 entered promiscuous mode
|
||||
[ 52.684922] br-lan: port 1(eth0.1) entered blocking state
|
||||
[ 52.690604] br-lan: port 1(eth0.1) entered forwarding state
|
||||
[ 52.696984] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
|
||||
[ 53.555813] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
|
||||
Loading…
Reference in New Issue