psionrevo
/
CubeCellRepeater
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update README.md

This commit is contained in:
tuxphone 2020-09-24 13:53:00 +02:00 committed by GitHub
parent e902a718ab
commit 5c6d734317
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 2 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
README.md
View File

@ -7,8 +7,7 @@ The actual node can be one of the LoRa CubeCell nodes by Heltec Automation: http
Notes:
Intended for use with the platform.io IDE. The platformio.ini for this project should contain "monitor_speed=115200" to use the built-in serial monitor.
Will work with Arduino IDE - just rename main.cpp to a valid Arduino sketch name (e.g. "CubeCellRepeater.ino") and put all files to a directory with the same name ("CubeCellRepeater"), then import project.
((( Should work with Arduino IDE - rename main.cpp to a valid Arduino sketch name (e.g. "CubeCellRepeater.ino") and put all files to a directory with the same name ("CubeCellRepeater"), then import project. )))
Will repeat packets ONCE. To prevent flooding a short list of received packet IDs is checked against the ID of the current packet.
Keep in mind that re-sending packets will cause the initial sender to assume that the packet is "received" or at least in the mesh.
@ -31,4 +30,4 @@ MESHTASTIC_SPEED 3 - defines your speed to "very long range". Other values
MESHTASTIC_NAME[12] = {"Default"} - sets your Channel Name, but without "-Xy" suffix , e.g. use "Test" instead of "Test-A"
TX_OUTPUT_POWER 22 - sets output power to 22 dB. Keep in mind the maximums set by law and the hardware
TX_OUTPUT_POWER 14 - sets output power to 14 dB. Keep in mind the maximums set by law and the hardware