From c47a5d71a1171e407c512c4f51db2b39ff7d05dd Mon Sep 17 00:00:00 2001 From: tuxphone <67556506+tuxphone@users.noreply.github.com> Date: Wed, 30 Sep 2020 15:14:24 +0200 Subject: [PATCH] Support for OLED (HTCC-AB02 and HTCC-AB02S) To activate OLED, #define NO_OLED to OLED --- src/main.cpp | 104 +++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 84 insertions(+), 20 deletions(-) diff --git a/src/main.cpp b/src/main.cpp index 5a68d0a..f3c104a 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -1,10 +1,11 @@ #include -#include "CubeCell_NeoPixel.h" #include "config.h" // CONFIGURATION: change values in config.h ! -#define VERBOSE // define to SILENT to turn off serial messages -#define BLINK // define to NOBLINK to turn off LED signaling +#define VERBOSE // define to SILENT to turn off serial messages +#define BLINK // define to NOBLINK to turn off LED signaling +#define NO_OLED // define to NO_OLED to turn off display + // OLED supported for cubecell_board_Plus (HTCC-AB02) and cubecell_gps (HTCC-AB02S) MeshPacket thePacket; ChannelSettings ChanSet; @@ -12,17 +13,44 @@ static RadioEvents_t RadioEvents; uint32_t lastreceivedID = 0x00000000; #ifndef NOBLINK +#include "CubeCell_NeoPixel.h" CubeCell_NeoPixel LED(1, RGB, NEO_GRB + NEO_KHZ800); #endif +#ifndef NO_OLED + #ifdef CubeCell_BoardPlus + #include "cubecell_SH1107Wire.h" + SH1107Wire display(0x3c, 500000, I2C_NUM_0,GEOMETRY_128_64,GPIO10 ); + #endif + #ifdef CubeCell_GPS + #include "cubecell_SSD1306Wire.h" + SSD1306Wire display(0x3c, 500000, I2C_NUM_0,GEOMETRY_128_64,GPIO10 ); + #endif +char str[64]; +#endif + void setup() { +#ifndef NO_OLED + pinMode(Vext,OUTPUT); + digitalWrite(Vext,LOW); +#endif #ifndef NOBLINK pinMode(Vext,OUTPUT); - digitalWrite(Vext,LOW); //SET POWER - LED.begin(); // INITIALIZE NeoPixel strip object (REQUIRED) + digitalWrite(Vext,LOW); + delay(100); + LED.begin(); LED.clear( ); LED.show(); #endif +#ifndef NO_OLED + display.init(); + display.clear(); + display.display(); + display.setTextAlignment(TEXT_ALIGN_LEFT); + display.setFont(ArialMT_Plain_16); + display.drawString(0,0,"CC Repeater"); + display.display(); +#endif #ifndef SILENT Serial.begin(115200); MSG("\nSetting up Radio:\n"); @@ -32,11 +60,10 @@ void setup() { RadioEvents.RxDone = RxDone; Radio.Init( &RadioEvents ); Radio.Sleep(); - memcpy(ChanSet.name, MESHTASTIC_NAME, 12); - //myRegion = ®ions[REGION]; + memcpy(ChanSet.name, MESHTASTIC_NAME, 12); ChanSet.channel_num = hash( MESHTASTIC_NAME ) % regions[REGION].numChannels; // see config.h ChanSet.tx_power = (regions[REGION].powerLimit == 0) ? TX_MAX_POWER : MIN(regions[REGION].powerLimit, TX_MAX_POWER) ; - ChanSet.psk = MESHTASTIC_PSK; + //ChanSet.psk = MESHTASTIC_PSK; /* FYI: "bandwidth": [0: 125 kHz, 1: 250 kHz, 2: 500 kHz, 3: 62.5kHz, 4: 41.67kHz, 5: 31.25kHz, 6: 20.83kHz, 7: 15.63kHz, 8: 10.42kHz, 9: 7.81kHz] @@ -82,6 +109,10 @@ void setup() { ConfigureRadio( ChanSet ); #ifndef SILENT MSG("..done! Switch to Receive Mode.\n"); +#endif +#ifndef NO_OLED + display.drawString(0,32, "Receive Mode.."); + display.display(); #endif Radio.Rx(0); // initial mode = receive } @@ -89,6 +120,7 @@ void setup() { void loop( ) { lowPowerHandler( ); + delay(500); Radio.IrqProcess( ); } @@ -101,6 +133,11 @@ void TxDone( void ) #endif #ifndef SILENT MSG(".done! Switch to Receive Mode.\n"); +#endif +#ifndef NO_OLED + sprintf(str,"..done. RX Mode.."); + display.drawString(42,53,str); + display.display(); #endif Radio.Rx( 0 ); // switch to receive mode } @@ -114,13 +151,18 @@ void TxTimeout( void ) #endif #ifndef SILENT MSG(".failed (TX Timeout)! Switch to Receive Mode.\n"); +#endif +#ifndef NO_OLED + sprintf(str,"..timeout!"); + display.drawString(42,53,str); + display.display(); #endif Radio.Rx( 0 ); // switch to receive mode } void RxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ) { - Radio.Sleep( ); + if ( !(Radio.GetStatus() == RF_RX_RUNNING) ) Radio.Sleep( ); if ( size > MAX_PAYLOAD_LENGTH ) size = MAX_PAYLOAD_LENGTH; if ( !(size > sizeof(PacketHeader)) ) { #ifndef SILENT @@ -143,23 +185,41 @@ void RxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ) memcpy(p->encrypted.bytes, payload + sizeof(PacketHeader), p->encrypted.size); #ifndef SILENT MSG("\nReceived packet! (Size %i bytes, RSSI %i, SNR %i)\n", size, rssi, snr); - MSG("TO: "); HEXMSG(thePacket.to); - MSG(" FROM: "); HEXMSG(thePacket.from); - MSG(" Packet ID: "); HEXMSG(thePacket.id); - MSG(" Flags: WANT_ACK="); MSG((thePacket.want_ack) ? "YES " : "NO "); - MSG(" HOP_LIMIT=%i\n", thePacket.hop_limit); - MSG("Payload:"); - for (int i=0; iencrypted.size; i++){ - MSG(" "); - HEXMSG(p->encrypted.bytes[i]); - } + MSG("TO: %.2X ", thePacket.to); + MSG(" FROM: %.2X ", thePacket.from); + MSG(" Packet ID: %.2X ", thePacket.id); + MSG(" Flags: WANT_ACK="); MSG((thePacket.want_ack) ? "YES " : "NO "); + MSG(" HOP_LIMIT=%i\n", thePacket.hop_limit); + MSG("Payload:"); for ( int i=0; i < p->encrypted.size; i++ ) MSG(" %.2X", p->encrypted.bytes[i]); MSG("\n"); #endif +#ifndef NO_OLED + display.clear(); + display.display(); + display.setFont(ArialMT_Plain_10); + sprintf(str,"Size: %i RSSI %i SNR %i", size, rssi, snr); + display.drawString(0,0,str); + sprintf(str,"%X", thePacket.to); + display.drawString(0,11,"TO:"); + display.drawString(40,11,str); + sprintf(str,"%X", thePacket.from); + display.drawString(0,22,"FROM:"); + display.drawString(40,22,str); + sprintf(str,"%X", thePacket.id); + display.drawString(0,32,"ID:"); + display.drawString(40,32,str); + display.display(); +#endif if ( !(lastreceivedID == thePacket.id) ){ // will repeat package #ifndef SILENT MSG("Sending packet.. (Size: %i)..", size); #endif + #ifndef NO_OLED + sprintf(str,"Sending.."); + display.drawString(0,53,str); + display.display(); + #endif lastreceivedID = thePacket.id; #ifndef NOBLINK LED.setPixelColor( 0, RGB_RED ); // send mode @@ -171,6 +231,11 @@ void RxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ) #ifndef SILENT MSG("PacketID = last PacketID, will not repeat again.\n"); #endif + #ifndef NO_OLED + sprintf(str,"ID known!"); + display.drawString(0,53,str); + display.display(); + #endif Radio.Rx( 0 ); // switch to Receive Mode } } @@ -188,7 +253,6 @@ unsigned long hash(char *str) void ConfigureRadio( ChannelSettings ChanSet ) { - //uint32_t freq = (myRegion->freq + myRegion->spacing * ChanSet.channel_num)*1E6; uint32_t freq = (regions[REGION].freq + regions[REGION].spacing * ChanSet.channel_num)*1E6; #ifndef SILENT