psionrevo
/
CubeCellRepeater
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Relaunch!

This commit is contained in:
tuxphone 2024-04-27 14:55:12 +02:00 committed by GitHub
parent 10d9d8f583
commit e20fae57c4
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 4 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
README.md
View File

@ -9,32 +9,15 @@ Notes:
Intended for use with the platform.io IDE. Depends on the NanoPB Lib and Base64 Lib (see platformio.ini). Serial output speed is 115200. Intended for use with the platform.io IDE. Depends on the NanoPB Lib and Base64 Lib (see platformio.ini). Serial output speed is 115200.
See the provided platformio.ini for built-in environments. Default is cubecell_board. See the provided platformio.ini for built-in environments. Default is cubecell_board.
Will repeat packets ONCE. To prevent flooding the last repeated packet ID will not be repeated again. Will repeat packets ONCE with HopLimit reduced by one. To prevent flooding the last repeated packet ID will not be repeated again.
If the HopLimit was already 0, the packet will not be repeated.
Keep in mind that re-sending packets will cause the initial sender to assume that the packet is "received" or at least in the mesh. Keep in mind that re-sending packets will cause the initial sender to assume that the packet is "received" or at least in the mesh.
If no other meshtastic node is in range of either the node or the repeater, the message will still be shown as received. If no other meshtastic node is in range of either the node or the repeater, the message will still be shown as received.
You can use this for range tests.
Will work with most packets meeting the radio settings, but the serial output is based on the assumption that the node receives meshtastic packets. Will work with most packets meeting the radio settings, but the serial output is based on the assumption that the node receives meshtastic packets.
Minimum size for none-Meshtastic packets is 14 bytes. Minimum size for none-Meshtastic packets is 14 bytes.
The Repeater is not working for “medium range” setting due to the tight timings. It’s best for "very long range" and "long range", but is working for "short range", too. "#define SILENT" in main.h to stop serial output.
"#define SILENT" to stop serial output. Modifying radio settings for your own radio settings: edit the main.h
"#define NOBLINK" to NOT getting a red blink from the RGB LED for the duration of sending a packet (can be quite long at speed setting 3).
"define NO_OLED" to turn off messages on the OLED. Supported Boards for OLED mode are HTCC-AB02 and HTCC-AB02S (cubecell_board_Plus and cubecell_gps).
Modifying radio settings for your own channels:
Edit the CONFIGURATION block in config.h
e.g.
#define REGION RegionCode_EU865 - defines your region (to EU865). For US, use RegionCode_US, for CN use RegionCode_CN etc. See config.h for more supported regions.
TX_MAX_POWER 14 - sets output power to 14 dB. This value will also be used, wenn output power is set to Zero in your RegionCode (0 = max. power). TX_MAX_POWER will be ignored, when higher than RegionCode maximum
char MeshtasticLink[] = "https://www.meshtastic.org/c/#GAMiENTxuzogKQdZ8Lz_q89Oab8qB0RlZmF1bHQ=" ; (Example String for Channel "Default")
Put your own Mesh Link into the "" . The Code will compute the channel settings based on that information.