psionrevo
/
CubeCellRepeater
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

NEW: Put your own meshtastic link in the config.h! 

By storing your channel link into the config.h the code can compute the correct settings for frequency, spread factor and code rate. 
Imagine that.. ;-)
This commit is contained in:
tuxphone 2020-10-27 16:28:06 +01:00 committed by GitHub
parent 1903495d92
commit e9698c0191
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
README.md
View File

@ -6,7 +6,7 @@ The actual node can be one of the LoRa CubeCell nodes by Heltec Automation: http
Notes: Notes:
Intended for use with the platform.io IDE. Depends on the NanoPB Lib. Serial output speed is 115200. Intended for use with the platform.io IDE. Depends on the NanoPB Lib and Base64 Lib (see platformio.ini). Serial output speed is 115200.
See the provided platformio.ini for built-in environments. Default is cubecell_board. See the provided platformio.ini for built-in environments. Default is cubecell_board.
Will repeat packets ONCE. To prevent flooding the last repeated packet ID will not be repeated again. Will repeat packets ONCE. To prevent flooding the last repeated packet ID will not be repeated again.
@ -24,15 +24,14 @@ Minimum size for none-Meshtastic packets is 14 bytes.
"define NO_OLED" to turn off messages on the OLED. Supported Boards for OLED mode are HTCC-AB02 and HTCC-AB02S (cubecell_board_Plus and cubecell_gps). "define NO_OLED" to turn off messages on the OLED. Supported Boards for OLED mode are HTCC-AB02 and HTCC-AB02S (cubecell_board_Plus and cubecell_gps).
Modify radio settings for your own channels: Modifying radio settings for your own channels:
Edit the CONFIGURATION block in config.h Edit the CONFIGURATION block in config.h
e.g. e.g.
#define REGION RegionCode_EU865 - defines your region (to EU865). For US, use RegionCode_US, for CN use RegionCode_CN etc. See config.h for more supported regions. #define REGION RegionCode_EU865 - defines your region (to EU865). For US, use RegionCode_US, for CN use RegionCode_CN etc. See config.h for more supported regions.
MESHTASTIC_SPEED 3 - defines your speed to "very long range". Values are: 0 = short range, 1 = medium range, 2 = long range, 3 = very long range TX_MAX_POWER 14 - sets output power to 14 dB. This value will also be used, wenn output power is set to Zero in your RegionCode (0 = max. power). TX_MAX_POWER will be ignored, when higher than RegionCode maximum
MESHTASTIC_NAME[12] = {"Default"} - sets your Channel Name, but without "-Xy" suffix , e.g. use "Test" instead of "Test-A" char MeshtasticLink[] = "https://www.meshtastic.org/c/#GAMiENTxuzogKQdZ8Lz_q89Oab8qB0RlZmF1bHQ=" ; (Example String for Channel "Default")
Put your own Mesh Link into the "" . The Code will compute the channel settings based on that information.
TX_MAX_POWER 14 - sets output power to 14 dB. This value will also be used, wenn output power is set to Zero in your RegionCode (0 = max. power). TX_MAX_POWER will be ignored, when higher than RegionCode maximum.