From fe0051294409b5569ea398f639614c56b7b8c845 Mon Sep 17 00:00:00 2001
From: tuxphone <67556506+tuxphone@users.noreply.github.com>
Date: Mon, 14 Sep 2020 16:25:07 +0200
Subject: [PATCH] Create main.cpp

---
 main.cpp | 175 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 175 insertions(+)
 create mode 100644 main.cpp

diff --git a/main.cpp b/main.cpp
new file mode 100644
index 0000000..aa95ab6
--- /dev/null
+++ b/main.cpp
@@ -0,0 +1,175 @@
+/*
+COPYRIGHT NOTICE
+
+This work is based on the Factory_test examples, found here: https://github.com/HelTecAutomation/ASR650x-Arduino/tree/master/libraries/Basics/examples
+so the copyright for this code belongs to Heltec Automation.
+
+Any additional changes are free-to-use, but at your own risk.
+*/
+#include <Arduino.h>    // for platform.io, remove when using Arduino IDE    
+
+// Radio settings for meshtastic channel "Default" @ "very long range (but slow)". Will not work with other settings or channels.
+#define RF_FREQUENCY                865200000   // Hz
+#define TX_OUTPUT_POWER             22          // dBm
+#define LORA_BANDWIDTH              0           // [0: 125 kHz, 1: 250 kHz, 2: 500 kHz, 3: Reserved]
+#define LORA_SPREADING_FACTOR       12          // [SF7..SF12]
+#define LORA_CODINGRATE             4           // [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
+#define LORA_PREAMBLE_LENGTH        32          // Same for Tx and Rx
+#define LORA_SYMBOL_TIMEOUT         0           // Symbols
+#define LORA_FIX_LENGTH_PAYLOAD_ON  false
+#define LORA_IQ_INVERSION_ON        false
+#define RX_TIMEOUT_VALUE            1000
+#define BUFFER_SIZE                 512         // max payload = maximum of the SX12xx
+
+#define ID_BUFFER_SIZE              32
+
+char mPacket[BUFFER_SIZE];
+
+uint32_t receivedID[ID_BUFFER_SIZE];
+int receivedCount = 0;
+
+static RadioEvents_t RadioEvents;
+void OnTxDone( void );
+void OnTxTimeout( void );
+void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr );
+
+typedef enum
+{
+    LOWPOWER,
+    RX,
+    TX
+}States_t;
+
+States_t state;
+int16_t rxSize;
+uint32_t x;             // re-used variable of type uint32_t, used in onRxDone()
+bool found;             // used in onRxDone()
+
+
+#define SILENT         // delete or change to VERBOSE if serial output is needed
+
+void setup() {
+    #ifndef SILENT
+    Serial.begin(115200);
+    Serial.print("\nSetting up Radio..");
+    #endif
+    RadioEvents.TxDone = OnTxDone;
+    RadioEvents.TxTimeout = OnTxTimeout;
+    RadioEvents.RxDone = OnRxDone;
+
+    Radio.Init( &RadioEvents );
+    Radio.SetChannel( RF_FREQUENCY );
+    Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH, LORA_SPREADING_FACTOR, LORA_CODINGRATE,
+                                   LORA_PREAMBLE_LENGTH, 0, true, 0, 0, 0, 20000 );
+
+    Radio.SetRxConfig( MODEM_LORA, LORA_BANDWIDTH, LORA_SPREADING_FACTOR, LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH,
+                                   LORA_SYMBOL_TIMEOUT, 0 , 0, true, 0, 0, 0, true );
+
+    state=RX;   // initial mode = receive
+    #ifndef SILENT
+    Serial.println(".done!\n");
+    #endif
+}
+
+void loop()
+{
+	switch(state)
+	{
+		case TX:
+            #ifndef SILENT
+            Serial.print("Sending packet..");
+            Serial.printf("(Size: %i)..", rxSize);
+            #endif
+            Radio.Send( (uint8_t *)mPacket, rxSize );
+		    state=LOWPOWER;
+		    break;
+		case RX:
+		    Radio.Rx( 0 );  // receive mode with no time-out
+		    state=LOWPOWER; 
+		    break;
+		case LOWPOWER:
+			lowPowerHandler(); // put SoC to sleep, wake-up at LoRa receive
+		    break;
+        default:
+            break;
+	}
+    Radio.IrqProcess( );
+}
+
+void OnTxDone( void )
+{
+	#ifndef SILENT
+    Serial.println(".done!");
+    #endif
+	state=RX; // switch to receive mode
+}
+
+void OnTxTimeout( void )
+{
+    #ifndef SILENT
+    Serial.println(".failed! (TX Timeout)");
+    #endif
+    Radio.Sleep();
+    state=RX; // switch to receive mode
+}
+
+void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr )
+{
+    memcpy( mPacket, payload, size );
+    rxSize=size;
+    Radio.Sleep();
+#ifndef SILENT
+    Serial.printf("\nReceived packet! (Size %i bytes, RSSI %i, SNR %i)\n", size, rssi, snr);
+    
+    Serial.print("TO: ");
+    for(int i=3; i>-1; i--){
+        Serial.print(mPacket[i], HEX);
+    }
+
+    Serial.print("  FROM: ");
+    for(int i=7; i>3; i--){
+        Serial.print(mPacket[i], HEX);
+    }
+
+    Serial.print("  PacketID: ");
+    for(int i=11; i>7; i--){
+        Serial.print(mPacket[i], HEX);
+    }
+
+    Serial.print("  Flags: ");
+    x = mPacket[12];
+    Serial.print("WANT_ACK=");
+    if (x > 8) {
+        Serial.print("YES ");
+        x -= 8;
+    }
+    else Serial.print("NO ");
+
+    Serial.printf("HOP_LIMIT=%i", x);
+    Serial.println();
+
+    Serial.print("Payload: ");
+    for(int i=13; i<size; i++){        
+        Serial.print(mPacket[i], HEX);
+        Serial.print(" ");
+    }
+    Serial.println();
+#endif 
+    // uint32_t packetID 
+    x = (uint32_t)mPacket[11]<<24 | (uint32_t)mPacket[10]<<16 | (uint32_t)mPacket[9]<<8 | (uint32_t)mPacket[8];
+    found = false;
+    for(int i = 0; i < ID_BUFFER_SIZE; i++){
+        if (receivedID[i] == x) found = true;
+    }
+    if (!found){ 
+        state=TX; // will repeat package
+        receivedID[receivedCount] = x; // add ID to received list
+        (receivedCount < (ID_BUFFER_SIZE - 1) ) ?  receivedCount++ : receivedCount = 0; // if counter = max, overwrite first entry in list, reset counter
+    }
+    else{
+        #ifndef SILENT
+        Serial.println("PacketID known, will not repeat again.");
+        #endif
+        state = RX; // wait for new package
+    } 
+}