diff --git a/README.md b/README.md
index 172a809..eadb08f 100644
--- a/README.md
+++ b/README.md
@@ -1,2 +1,13 @@
 # RPI_SGP30
-Python-based  SPI30 "program" for the SGP30 
+
+Based on the smbus2 for ease of use. Program to read eCO_2 and TVOC from the [https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/9_Gas_Sensors/Sensirion_Gas_Sensors_SGP30_Datasheet_EN.pdf](SGP30 sensor).
+
+It currently lacks support for many features features and is more of a crude demo than a proper library.
+
+## Features that are known to be missing (listing in rough order of importance):
+* CRC support
+* reading/writing base-line data
+* reading raw-values
+* Proper structuring of the code
+
+If you have the AdaFruit board with built in level shifters and voltage regulator it is should work if you just plug in [https://pinout.xyz/pinout/i2c](SDA to pin 3, SCL to pin 5, VCC to pin 17 and GND to pin 20). You should then be able to find the SGP30 an address 0x58 using `i2cdetect -y 1`. If you get an error message  you probbably need to enable i2c in the kernel using [https://learn.sparkfun.com/tutorials/raspberry-pi-spi-and-i2c-tutorial](`raspi-config` and reboot)