From 888d27879d056e8a287f8e08fac9e8076dfb5d06 Mon Sep 17 00:00:00 2001 From: zinob Date: Mon, 23 Apr 2018 10:02:57 +0200 Subject: [PATCH] Readme: Fixes link format to RST --- README.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.rst b/README.rst index 93a9f9f..6f5559e 100644 --- a/README.rst +++ b/README.rst @@ -1,7 +1,7 @@ RPI_SGP30 ========= -Program to read eCO_2 and TVOC from the [SGP30 sensor](https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/9_Gas_Sensors/Sensirion_Gas_Sensors_SGP30_Datasheet_EN.pdf). Based on the smbus2 i2c library for ease of use. +Program to read eCO_2 and TVOC from the `SGP30 sensor `_. Based on the smbus2 i2c library for ease of use. Quick usage-example: @@ -35,5 +35,5 @@ Features that are known to be missing (listing in rough order of importance): Hardware notices: ----------------- -If you have the AdaFruit board with built in level shifters and voltage regulator it is should work if you just plug in [SDA to pin 3, SCL to pin 5, VCC to pin 17 and GND to pin 20](https://pinout.xyz/pinout/i2c). You should then be able to find the SGP30 an address 0x58 using `i2cdetect -y 1`. If you get an error message you probbably need to enable i2c in the kernel using [`raspi-config` and reboot](https://learn.sparkfun.com/tutorials/raspberry-pi-spi-and-i2c-tutorial) +If you have the AdaFruit board with built in level shifters and voltage regulator it is should work if you just plug in `SDA to pin 3, SCL to pin 5, VCC to pin 17 and GND to pin 20 `_. You should then be able to find the SGP30 an address 0x58 using `i2cdetect -y 1`. If you get an error message you probbably need to enable i2c in the kernel using `raspi-config and reboot `_