smallsolar/solar_cluster
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
4037c4510c5a5f37a07c549a1166efaa13d613e9
solar_cluster/a5y17lte/boot_log.txt
smallsolar 1a7db79586 Add a5y17lte/boot_log.txt
2025-11-09 19:10:09 +00:00

391 lines
36 KiB
Plaintext
Raw Blame History

Samsung S-Boot 4.0 for SM-A520F (Nov 27 2020 - 11:58:22 36271825)
EXYNOS7880 EVT 0.1 (Base on ARM CortexA50)
3044MB / 0MB / Rev 10 / A520FXXUGCTKA / (PKG_ID 0xe7880202) / LOT_ID S74B1 / SHIP /SW_RST (0x20000000)
MON: 0x4b(1)
MON[0] = (1)[0x1d, 0x38]
MON[1] = (2)[0x1f, 0x18]
MON[2] = (3)[0x2a, 0x84]
MON[3] = (4)[0x33, 0xd0]
MON[4] = (5)[0x34, 0x0a]
MON[5] = (6)[0x37, 0x0a]
MON[6] = (7)[0x1e, 0x4c]
MON[7] = (0)[0x0a, 0x00]
__init_microusb_ic
[MUIC] muic_register_s2mu004_apis
Try 0 : [MUIC] muic_id:0x038.
-> matched(s2mu004).
MUIC rev = S2MU004(56), evt8
s2mu004_muic_get_adc_value: ADC:0x1f
s2mu004_init_microusb_ic: MUIC: CONTROL writing success.
s2mu004_init_microusb_ic: MUIC: CONTROL:0x17
s2mu004_init_microusb_ic: MUIC: TIMING3: 0x8d
s2mu004_muic_get_attached_device: INT[1:0x00, 2:0x00]
s2mu004_muic_get_attached_device: DEV[1:0x04, 2:0x00, 3:0x00]
ccic_register_s2mu004:
ccic_is_s2mu004:
ccic_is_s2mu004: reg:b2 - val:00 ret:00
get_vbvolt: apple: 0x07, dev3: 0x00
get_vbvolt: vbvolt: 0x02
ccic_register_s2mu004: BEFORE VBUS(2)
s2mu004_ccic_set_normal_mode:
s2mu004_ccic_set_normal_mode: 27 10
s2mu004_ccic_check_pd_ta: POWER NEGO CHECK!
s2mu004_ccic_check_pd_ta: S2MU004_REG_RID at FIRST : 0
s2mu004_ccic_set_normal_mode:
s2mu004_ccic_set_normal_mode: 27 10
s2mu004_ccic_check_jig: S2MU004_REG_RID at SECOND : 0
s2mu004 found.
mach_board_initialize: Active ccic device.
s2mu004_muic_get_attached_device: INT[1:0x00, 2:0x00]
s2mu004_muic_get_attached_device: DEV[1:0x04, 2:0x00, 3:0x00]
ifconn_init: CCIC Mode
ifconn_get_jig_status: CCIC Mode
ccic_read_adc:
s2mu004_read_adc:
s2mu004_read_adc: RID = 00(RID_0)
ifconn_is_ccic_jig_device: rid=00
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuacct
[ 0.000000] [0: swapper: 0] Linux version 3.18.14 (pmos@node0) (gcc version 6.4.0 (postmarketOS 6.4.0) ) #15-postmarketOS SMP PREEMPT Sun Nov 9 16:37:10 UTC 2025
[ 0.000000] [0: swapper: 0] CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000] [0: swapper: 0] Detected VIPT I-cache on CPU0
[ 0.000000] [0: swapper: 0] alternative: enabling workaround for ARM erratum 845719
[ 0.000000] [0: swapper: 0] [ECT] Address 67feb000, Size 14000
[ 0.000000] [0: swapper: 0] Early serial console at I/O port 0x0 (options '115200n8')
[ 0.000000] [0: swapper: 0] bootconsole [uart0] enabled
[ 0.000000] [0: swapper: 0] charging_mode() : 0x0(0)
[ 0.000000] [0: swapper: 0] modem_if_reserved_mem_setup: memory reserved: paddr=1744830464, t_size=121634816
[ 0.000000] [0: swapper: 0] deliver_cp_reserved_mem_setup: memory reserved: paddr=1744826368, t_size=4096
[ 0.000000] [0: swapper: 0] sec_debug: set magic code (0x66262564)
[ 0.000000] [0: swapper/0: 0] cal_dfs_get_rate : dvfs_cam reference count is zero
[ 0.000000] [0: swapper/0: 0] cal_dfs_get_rate : dvfs_disp reference count is zero
[ 0.304998] [0: swapper/0: 1] exynos_set_debug_mem: alloc kmem for smc_dbg virt: 0xffffffc0bb83f000 phys: 0x00000000fb83f000 size: 4096.
[ 0.317892] [0: swapper/0: 1] exynos_set_debug_mem: Can not set the address to el3 monitor. ret = 0xffffffff. free the kmem
[ 0.362723] [0: swapper/0: 1] platform 14821000.vpp: create IOVMM device node : vpp
[ 0.371025] [0: swapper/0: 1] platform 14822000.vpp: create IOVMM device node : vpp
[ 0.379457] [0: swapper/0: 1] platform 14823000.vpp: create IOVMM device node : vpp
[ 0.387864] [0: swapper/0: 1] platform 14824000.vpp: create IOVMM device node : vpp
[ 0.396461] [0: swapper/0: 1] platform 14480000.fimc_is: create IOVMM device node : fimc_is
[ 0.405475] [0: swapper/0: 1] platform 14420000.fimc_is_sensor: create IOVMM device node : fimc_is_sensor
[ 0.415788] [0: swapper/0: 1] platform 14460000.fimc_is_sensor: create IOVMM device node : fimc_is_sensor
[ 0.426285] [0: swapper/0: 1] platform 12c10000.scaler: create IOVMM device node : scaler
[ 0.435115] [0: swapper/0: 1] platform 12c00000.scaler: create IOVMM device node : scaler
[ 0.444050] [0: swapper/0: 1] platform 12c20000.smfc: create IOVMM device node : smfc
[ 0.452800] [0: swapper/0: 1] platform 12c30000.mfc0: create IOVMM device node : mfc0
[ 0.519026] [0: swapper/0: 1] s3c64xx-spi 13920000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.529050] [0: swapper/0: 1] s3c64xx-spi 100c0000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.539080] [0: swapper/0: 1] s3c64xx-spi 13930000.spi: spi clkoff-time 0
[ 0.789346] [1: swapper/0: 1] can't find pms value for rate(98304000Hz) of AUD_PLL
[ 0.797430] [1: swapper/0: 1] p1_set error(p1_aud_pll) (98304000)
[ 0.804449] [1: swapper/0: 1] [CAL]cal_vclk_set_rate failed.
[ 0.810964] [1: swapper/0: 1] [CAL]cal_vclk_set_rate failed.
[ 0.817434] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_enable (count = 1)
[ 0.826212] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_enable: LPASS is not available
[ 0.835683] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_probe Completed
[ 1.186917] [1: swapper/0: 1] mst_drv_init
[ 1.192155] [1: swapper/0: 1] MST_DRV]]] gpio pwr en inited
[ 1.198374] [1: swapper/0: 1] sec_mst_gpio_init : Send Output
[ 1.204835] [1: swapper/0: 1] mst_ldo_device_probe
[ 1.210624] [1: swapper/0: 1] MST_LDO_DRV]]] init , ret val : 0
[ 1.219978] [1: swapper/0: 1] exynos-mipi-phy 148f100c.phy_m4s4_dsi: Creating exynos-mipi-phy
[ 1.229527] [1: swapper/0: 1] exynos-mipi-phy 144f1040.phy_isp_csi: Creating exynos-mipi-phy
[ 1.248120] [0: swapper/0: 1] samsung,uart-logging enabled
[ 1.254503] [0: swapper/0: 1] samsung-uart 13810000.uart: could not get bt uart pinctrl
[ 1.263656] [0: swapper/0: 1] Call trace:
[ 1.268783] [0: swapper/0: 1] samsung,uart-logging disabled
[ 0.000000] [0: swapper: 0] charging_mode() : 0x0(0)
[ 0.000000] [0: swapper: 0] modem_if_reserved_mem_setup: memory reserved: paddr=1744830464, t_size=121634816
[ 0.000000] [0: swapper: 0] deliver_cp_reserved_mem_setup: memory reserved: paddr=1744826368, t_size=4096
[ 0.000000] [0: swapper: 0] sec_debug: set magic code (0x66262564)
[ 0.000000] [0: swapper/0: 0] cal_dfs_get_rate : dvfs_cam reference count is zero
[ 0.000000] [0: swapper/0: 0] cal_dfs_get_rate : dvfs_disp reference count is zero
[ 0.304998] [0: swapper/0: 1] exynos_set_debug_mem: alloc kmem for smc_dbg virt: 0xffffffc0bb83f000 phys: 0x00000000fb83f000 size: 4096.
[ 0.317892] [0: swapper/0: 1] exynos_set_debug_mem: Can not set the address to el3 monitor. ret = 0xffffffff. free the kmem
[ 0.362723] [0: swapper/0: 1] platform 14821000.vpp: create IOVMM device node : vpp
[ 0.371025] [0: swapper/0: 1] platform 14822000.vpp: create IOVMM device node : vpp
[ 0.379457] [0: swapper/0: 1] platform 14823000.vpp: create IOVMM device node : vpp
[ 0.387864] [0: swapper/0: 1] platform 14824000.vpp: create IOVMM device node : vpp
[ 0.396461] [0: swapper/0: 1] platform 14480000.fimc_is: create IOVMM device node : fimc_is
[ 0.405475] [0: swapper/0: 1] platform 14420000.fimc_is_sensor: create IOVMM device node : fimc_is_sensor
[ 0.415788] [0: swapper/0: 1] platform 14460000.fimc_is_sensor: create IOVMM device node : fimc_is_sensor
[ 0.426285] [0: swapper/0: 1] platform 12c10000.scaler: create IOVMM device node : scaler
[ 0.435115] [0: swapper/0: 1] platform 12c00000.scaler: create IOVMM device node : scaler
[ 0.444050] [0: swapper/0: 1] platform 12c20000.smfc: create IOVMM device node : smfc
[ 0.452800] [0: swapper/0: 1] platform 12c30000.mfc0: create IOVMM device node : mfc0
[ 0.519026] [0: swapper/0: 1] s3c64xx-spi 13920000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.529050] [0: swapper/0: 1] s3c64xx-spi 100c0000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.539080] [0: swapper/0: 1] s3c64xx-spi 13930000.spi: spi clkoff-time 0
[ 0.789346] [1: swapper/0: 1] can't find pms value for rate(98304000Hz) of AUD_PLL
[ 0.797430] [1: swapper/0: 1] p1_set error(p1_aud_pll) (98304000)
[ 0.804449] [1: swapper/0: 1] [CAL]cal_vclk_set_rate failed.
[ 0.810964] [1: swapper/0: 1] [CAL]cal_vclk_set_rate failed.
[ 0.817434] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_enable (count = 1)
[ 0.826212] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_enable: LPASS is not available
[ 0.835683] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_probe Completed
[ 1.186917] [1: swapper/0: 1] mst_drv_init
[ 1.192155] [1: swapper/0: 1] MST_DRV]]] gpio pwr en inited
[ 1.198374] [1: swapper/0: 1] sec_mst_gpio_init : Send Output
[ 1.204835] [1: swapper/0: 1] mst_ldo_device_probe
[ 1.210624] [1: swapper/0: 1] MST_LDO_DRV]]] init , ret val : 0
[ 1.219978] [1: swapper/0: 1] exynos-mipi-phy 148f100c.phy_m4s4_dsi: Creating exynos-mipi-phy
[ 1.229527] [1: swapper/0: 1] exynos-mipi-phy 144f1040.phy_isp_csi: Creating exynos-mipi-phy
[ 1.248120] [0: swapper/0: 1] samsung,uart-logging enabled
[ 1.254503] [0: swapper/0: 1] samsung-uart 13810000.uart: could not get bt uart pinctrl
[ 1.263656] [0: swapper/0: 1] Call trace:
[ 1.268783] [0: swapper/0: 1] samsung,uart-logging disabled
[ 1.582692] [1: swapper/0: 1] Call trace:
[ 1.582692] [1: swapper/0: 1] Call trace:
[ 1.611802] [1: swapper/0: 1] Call trace:
[ 1.611802] [1: swapper/0: 1] Call trace:
[ 1.629222] [1: swapper/0: 1] mcu_ipc 10600000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start.
[ 1.629222] [1: swapper/0: 1] mcu_ipc 10600000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start.
[ 1.638452] [1: swapper/0: 1] mcu_ipc 10600000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done.
[ 1.638452] [1: swapper/0: 1] mcu_ipc 10600000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done.
[ 1.656563] [1: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start.
[ 1.656563] [1: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start.
[ 1.674637] [1: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: Failed to get affinity mask
[ 1.674637] [1: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: Failed to get affinity mask
[ 1.692086] [1: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: Can't set IRQ affinity with(-19)
[ 1.692086] [1: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: Can't set IRQ affinity with(-19)
[ 1.709351] [1: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done.
[ 1.709351] [1: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done.
[ 1.727863] [1: swapper/0: 1] shm_ipc shmem@F0000000: shm_probe: shmem driver init
[ 1.727863] [1: swapper/0: 1] shm_ipc shmem@F0000000: shm_probe: shmem driver init
[ 1.744576] [1: swapper/0: 1] shm_ipc shmem@F0000000: paddr=1744830464, t_size=121634816, ipc_off=117440512, ipc_size=4194304
[ 1.744576] [1: swapper/0: 1] shm_ipc shmem@F0000000: paddr=1744830464, t_size=121634816, ipc_off=117440512, ipc_size=4194304
[ 1.765231] [1: swapper/0: 1] uart_sel_probe: uart_sel probe start.
[ 1.765231] [1: swapper/0: 1] uart_sel_probe: uart_sel probe start.
[ 1.784033] [1: swapper/0: 1] Change UART to AP
[ 1.784033] [1: swapper/0: 1] Change UART to AP
[ 1.796344] [1: swapper/0: 1] switch_handle_notification: action=0 attached_dev=67
[ 1.796344] [1: swapper/0: 1] switch_handle_notification: action=0 attached_dev=67
[ 1.810202] [1: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: +++ ()
[ 1.810202] [1: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: +++ ()
[ 1.826148] [1: swapper/0: 1] mif: ss310ap_init_modemctl_device: +++
[ 1.826148] [1: swapper/0: 1] mif: ss310ap_init_modemctl_device: +++
[ 1.840398] [1: swapper/0: 1] mif: ss310ap_init_modemctl_device: cp_rst_n: Invalied gpio pins
[ 1.840398] [1: swapper/0: 1] mif: ss310ap_init_modemctl_device: cp_rst_n: Invalied gpio pins
[ 1.856580] [1: swapper/0: 1] mif: ss310ap_init_modemctl_device: Check Qch clock node...
[ 1.856580] [1: swapper/0: 1] mif: ss310ap_init_modemctl_device: Check Qch clock node...
[ 1.874721] [1: swapper/0: 1] mif: ss310ap_init_modemctl_device: ---
[ 1.874721] [1: swapper/0: 1] mif: ss310ap_init_modemctl_device: ---
[ 1.890669] [1: swapper/0: 1] mif: shmem_create_link_device: +++
[ 1.890669] [1: swapper/0: 1] mif: shmem_create_link_device: +++
[ 1.904524] [1: swapper/0: 1] mif: shmem_create_link_device: MODEM:ss325ap LINK:shmem
[ 1.904524] [1: swapper/0: 1] mif: shmem_create_link_device: MODEM:ss325ap LINK:shmem
[ 1.919982] [1: swapper/0: 1] mif: shmem_create_link_device: shmem<->ss325ap: LINK_ATTR_DPRAM_MAGIC
[ 1.919982] [1: swapper/0: 1] mif: shmem_create_link_device: shmem<->ss325ap: LINK_ATTR_DPRAM_MAGIC
[ 1.940797] [1: swapper/0: 1] mif: shmem_create_link_device: boot_base=ffffff8015177000, boot_size=117440512
[ 1.940797] [1: swapper/0: 1] mif: shmem_create_link_device: boot_base=ffffff8015177000, boot_size=117440512
[ 1.958783] [1: swapper/0: 1] mif: shmem_create_link_device: ipc_base=ffffff801c178000, ipc_size=4194304
[ 1.958783] [1: swapper/0: 1] mif: shmem_create_link_device: ipc_base=ffffff801c178000, ipc_size=4194304
[ 1.980368] [1: swapper/0: 1] mif: shmem_create_link_device: packet log device create fail
[ 1.980368] [1: swapper/0: 1] mif: shmem_create_link_device: packet log device create fail
[ 1.998762] [1: swapper/0: 1] mif: shmem_create_link_device: ---
[ 1.998762] [1: swapper/0: 1] mif: shmem_create_link_device: ---
[ 2.014527] [1: swapper/0: 1] mif: modem_probe: ss325ap: shmem link created
[ 2.014527] [1: swapper/0: 1] mif: modem_probe: ss325ap: shmem link created
[ 2.032724] [1: swapper/0: 1] mif: create_io_device: BOOT device = umts_boot0
[ 2.032724] [1: swapper/0: 1] mif: create_io_device: BOOT device = umts_boot0
[ 2.044872] [1: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: ---
[ 2.044872] [1: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: ---
[ 2.060017] [1: swapper/0: 1] gif: gnss_probe: gnss_pdata: +++
[ 2.060017] [1: swapper/0: 1] gif: gnss_probe: gnss_pdata: +++
[ 2.073465] [1: swapper/0: 1] gif: create_gnssctl_device: Found Qch clk!
[ 2.073465] [1: swapper/0: 1] gif: create_gnssctl_device: Found Qch clk!
[ 2.087427] [1: swapper/0: 1] gif: init_gnssctl_device: [GNSS IF] Initializing GNSS Control
[ 2.087427] [1: swapper/0: 1] gif: init_gnssctl_device: [GNSS IF] Initializing GNSS Control
[ 2.104109] [1: swapper/0: 1] gif: init_gnssctl_device: Using simple lock sequence!!!
[ 2.104109] [1: swapper/0: 1] gif: init_gnssctl_device: Using simple lock sequence!!!
[ 2.121694] [1: swapper/0: 1] gif: init_gnssctl_device: Initializing shared memory for GNSS.
[ 2.121694] [1: swapper/0: 1] gif: init_gnssctl_device: Initializing shared memory for GNSS.
[ 2.139484] [1: swapper/0: 1] gif: set_shdmem_size: [GNSS]Set shared mem size: 4194304B
[ 2.139484] [1: swapper/0: 1] gif: set_shdmem_size: [GNSS]Set shared mem size: 4194304B
[ 2.157447] [1: swapper/0: 1] gif: set_shdmem_base: [GNSS]Set shared mem baseaddr : 0x70000000
[ 2.157447] [1: swapper/0: 1] gif: set_shdmem_base: [GNSS]Set shared mem baseaddr : 0x70000000
[ 2.175618] [1: swapper/0: 1] gif: init_gnssctl_device: ---
[ 2.175618] [1: swapper/0: 1] gif: init_gnssctl_device: ---
[ 2.191259] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: SHMEM: KEPLER
[ 2.191259] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: SHMEM: KEPLER
[ 2.205923] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: GNSS_SHDMEM: gnss phys_addr:0x70000000 virt_addr:0xffffff801c579000 size: 2097152
[ 2.205923] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: GNSS_SHDMEM: gnss phys_addr:0x70000000 virt_addr:0xffffff801c579000 size: 2097152
[ 2.227805] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: GNSS_SHDMEM: phys_addr:0x70200000 virt_addr:0xffffff801c77a000 size:2097152
[ 2.227805] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: GNSS_SHDMEM: phys_addr:0x70200000 virt_addr:0xffffff801c77a000 size:2097152
[ 2.255631] [1: swapper/0: 1] gif: gnss_probe: KEPLER: GNSS_SHDMEM link created
[ 2.255631] [1: swapper/0: 1] gif: gnss_probe: KEPLER: GNSS_SHDMEM link created
[ 2.276766] [1: swapper/0: 1] gif: gnss_probe: KEPLER: ---
[ 2.276766] [1: swapper/0: 1] gif: gnss_probe: KEPLER: ---
[ 2.291394] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin gpd2-1 already requested by 139b0000.pinctrl; cannot claim for 7-003d
[ 2.291394] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin gpd2-1 already requested by 139b0000.pinctrl; cannot claim for 7-003d
[ 2.310353] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin-121 (7-003d) status -22
[ 2.310353] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin-121 (7-003d) status -22
[ 2.332515] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: could not request pin 121 (gpd2-1) from group gpd2-1 on device samsung-pinctrl
[ 2.332515] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: could not request pin 121 (gpd2-1) from group gpd2-1 on device samsung-pinctrl
[ 2.355293] [1: swapper/0: 1] s2mu004 7-003d: Error applying setting, reverse things back
[ 2.355293] [1: swapper/0: 1] s2mu004 7-003d: Error applying setting, reverse things back
[ 2.378647] [0: swapper/0: 1] [s2mu004 mfd] s2mu004_i2c_probe : 0x38, rev=0x3, ver=0x8
[ 2.378647] [0: swapper/0: 1] [s2mu004 mfd] s2mu004_i2c_probe : 0x38, rev=0x3, ver=0x8
[ 2.395420] [0: swapper/0: 1] s2mu004:s2mu004_irq_init irq=7, irq->gpio=32
[ 2.395420] [0: swapper/0: 1] s2mu004:s2mu004_irq_init irq=7, irq->gpio=32
[ 2.501897] [4: irq/6-sec-nfc: 1152] sec-nfc 5-0027: [NFC] Warning,irq-gpio state is low!
[ 2.501897] [4: irq/6-sec-nfc: 1152] sec-nfc 5-0027: [NFC] Warning,irq-gpio state is low!
[ 2.711112] [0: swapper/0: 1] dwc3 13600000.dwc3: dwc3_otg address space is not supported
[ 2.711112] [0: swapper/0: 1] dwc3 13600000.dwc3: dwc3_otg address space is not supported
[ 2.720634] [0: swapper/0: 1] dwc3 13600000.dwc3: Binding gadget dwc3-gadget
[ 2.720634] [0: swapper/0: 1] dwc3 13600000.dwc3: Binding gadget dwc3-gadget
[ 2.742702] [0: swapper/0: 1] abov-touchkey-ft1804 6-0020: [sec_input] no irq_flag
[ 2.742702] [0: swapper/0: 1] abov-touchkey-ft1804 6-0020: [sec_input] no irq_flag
[ 2.753261] [0: swapper/0: 1] abov-touchkey-ft1804 6-0020: [sec_input] abov_tk_probe done
[ 2.753261] [0: swapper/0: 1] abov-touchkey-ft1804 6-0020: [sec_input] abov_tk_probe done
[ 3.087658] [5:irq/5-bt532_ts_: 1209] bt532_ts_device 9-0020: [sec_input] Invalid interrupt
[ 3.087658] [5:irq/5-bt532_ts_: 1209] bt532_ts_device 9-0020: [sec_input] Invalid interrupt
[ 3.101884] [1: swapper/0: 1] sec-thermistor sec_thermistor@0: sec_therm_probe: fail to get iio channel
[ 3.101884] [1: swapper/0: 1] sec-thermistor sec_thermistor@0: sec_therm_probe: fail to get iio channel
[ 3.211727] [0: swapper/0: 1] s2mu004_fuelgauge_parse_dt fg_log_disabled -22
[ 3.211727] [0: swapper/0: 1] s2mu004_fuelgauge_parse_dt fg_log_disabled -22
[ 3.222555] [0: swapper/0: 1] s2mu004-fuelgauge 10-003b: s2mu004_get_rawsoc: OTP 4E(00) 4F(00) current 4E(f6) 4F(1f)
[ 3.222555] [0: swapper/0: 1] s2mu004-fuelgauge 10-003b: s2mu004_get_rawsoc: OTP 4E(00) 4F(00) current 4E(f6) 4F(1f)
[ 3.308919] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 3.308919] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 3.326754] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 3.326754] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 3.334408] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to set psy (s2mu004-charger)
[ 3.334408] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to set psy (s2mu004-charger)
[ 3.350557] [0: swapper/0: 1] s2mu004_init_regs: s2mu004 fuelgauge initialize
[ 3.350557] [0: swapper/0: 1] s2mu004_init_regs: s2mu004 fuelgauge initialize
[ 3.375816] [0: swapper/0: 1] s2mu004_charger_parse_dt np NULL(sec-multi-charger)
[ 3.375816] [0: swapper/0: 1] s2mu004_charger_parse_dt np NULL(sec-multi-charger)
[ 3.444258] [0: swapper/0: 1] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x11, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95
[ 3.444258] [0: swapper/0: 1] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x11, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95
[ 3.491816] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_apb_probe
[ 3.491816] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_apb_probe
[ 3.518170] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_probe
[ 3.518170] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_probe
[ 3.531903] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_resume (count = 1)
[ 3.531903] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_resume (count = 1)
[ 3.548939] [5: swapper/0: 1] audmixer 14880000.s1402x: lpass_get_sync: audiomixer (use:1)
[ 3.548939] [5: swapper/0: 1] audmixer 14880000.s1402x: lpass_get_sync: audiomixer (use:1)
[ 3.606702] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) post_update_fw
[ 3.606702] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) post_update_fw
[ 3.614276] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_suspend (count = 1)
[ 3.614276] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_suspend (count = 1)
[ 3.631502] [5: swapper/0: 1] audmixer 14880000.s1402x: lpass_put_sync: audiomixer (use:0)
[ 3.631502] [5: swapper/0: 1] audmixer 14880000.s1402x: lpass_put_sync: audiomixer (use:0)
[ 3.650338] [5: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_codec_probe
[ 3.650338] [5: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_codec_probe
[ 3.666581] [0: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_runtime_resume
[ 3.666581] [0: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_runtime_resume
[ 3.681451] [0: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_enable
[ 3.681451] [0: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_enable
[ 3.695989] [0: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_resume (count = 2)
[ 3.695989] [0: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_resume (count = 2)
[ 3.712418] [0: swapper/0: 1] audmixer 14880000.s1402x: lpass_get_sync: audiomixer (use:1)
[ 3.712418] [0: swapper/0: 1] audmixer 14880000.s1402x: lpass_get_sync: audiomixer (use:1)
[ 3.792759] [0: swapper/0: 1] cod3026x 0-a004: cod3026x_save_otp_registers called
[ 3.792759] [0: swapper/0: 1] cod3026x 0-a004: cod3026x_save_otp_registers called
[ 3.803207] [0: swapper/0: 1] cod3026x 0-a004: Bias voltage values: bias1 = 1, bias2= 1, ldo = 3
[ 3.803207] [0: swapper/0: 1] cod3026x 0-a004: Bias voltage values: bias1 = 1, bias2= 1, ldo = 3
[ 3.818782] [0: swapper/0: 1] cod3026x 0-a004: Using GPADC for jack/button detection
[ 3.818782] [0: swapper/0: 1] cod3026x 0-a004: Using GPADC for jack/button detection
[ 3.836888] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(226), low(0), high(399)
[ 3.836888] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(226), low(0), high(399)
[ 3.854569] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(582), low(400), high(470)
[ 3.854569] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(582), low(400), high(470)
[ 3.873322] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(115), low(471), high(655)
[ 3.873322] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(115), low(471), high(655)
[ 3.892231] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(114), low(656), high(1100)
[ 3.892231] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(114), low(656), high(1100)
[ 3.911253] [0: swapper/0: 1] cod3026x 0-a004: cod3026x_post_fw_update_failure called, setting defaults
[ 3.911253] [0: swapper/0: 1] cod3026x 0-a004: cod3026x_post_fw_update_failure called, setting defaults
[ 3.933472] [5: swapper/0: 1] cod3026x 0-a004: [DEBUG]cod3026x_codec_probe : int_gpio 13
[ 3.933472] [5: swapper/0: 1] cod3026x 0-a004: [DEBUG]cod3026x_codec_probe : int_gpio 13
[ 3.950168] [5: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_runtime_suspend
[ 3.950168] [5: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_runtime_suspend
[ 3.966470] [5: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_disable
[ 3.966470] [5: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_disable
[ 3.981217] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_suspend (count = 2)
[ 3.981217] [5: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_suspend (count = 2)
[ 3.997844] [5: swapper/0: 1] audmixer 14880000.s1402x: lpass_put_sync: audiomixer (use:0)
[ 3.997844] [5: swapper/0: 1] audmixer 14880000.s1402x: lpass_put_sync: audiomixer (use:0)
[ 4.016372] [5: swapper/0: 1] cod3026x 0-a004: Unable to configure codec gpio as idle
[ 4.016372] [5: swapper/0: 1] cod3026x 0-a004: Unable to configure codec gpio as idle
[ 4.036438] [5: swapper/0: 1] audmixer 14880000.s1402x: audmixer_init called
[ 4.036438] [5: swapper/0: 1] audmixer 14880000.s1402x: audmixer_init called
[ 4.050465] [5: swapper/0: 1] universal7880-audio sound: universal7880_late_probe called
[ 4.050465] [5: swapper/0: 1] universal7880-audio sound: universal7880_late_probe called
[ 4.069086] [0: swapper/0: 1] universal7880-audio sound: BIAS: MIC1(1), MIC2(1), MIC3(2), LINEIN(0)
[ 4.069086] [0: swapper/0: 1] universal7880-audio sound: BIAS: MIC1(1), MIC2(1), MIC3(2), LINEIN(0)
[ 4.085768] [0: swapper/0: 1] universal7880-audio sound: universal7880_request_ext_mic_bias_en_gpio called
[ 4.085768] [0: swapper/0: 1] universal7880-audio sound: universal7880_request_ext_mic_bias_en_gpio called
[ 4.139213] [0: swapper/0: 1] [muic] of_s2mu004_muic_dt : could not find muic gpio
[ 4.159684] [0: swapper/0: 1] [muic] s2mu004_muic_probe rustproof is enabled
[ 4.332936] [0: swapper/0: 1] usbpd-s2mu004 10-003c: s2mu004_usbpd_init_configure : Initial abnormal state to LPM Mode
[ 4.437369] [4:irq/7-s2mu004-i: 1146] switch_handle_notification: action=0 attached_dev=67
[ 4.439560] [4:irq/7-s2mu004-i: 1146] switch_handle_notification: action=1 attached_dev=1
[ 4.501689] [0: swapper/0: 1] ccic_notifier_init already registered
[ 4.508291] [5:irq/14-s2mu004-: 1551] s2mu004_set_vconn_source, not support vconn source
[ 4.513119] [0: swapper/0: 1] usbpd-s2mu004 10-003c: s2mu004_check_port_detect, PLUG Error
[ 4.517469] [0: swapper/0: 1] dual_role_get_local_prop : usbpd_data is null : request prop = 1
[ 4.517585] [0: swapper/0: 1] dual_role_usb otg_default: driver failed to report `mode' property: -22
[ 4.523109] [0: kworker/0:1: 546] dual_role_get_local_prop : usbpd_data is null : request prop = 1
[ 4.532569] [0: kworker/0:1: 546] dual_role_usb otg_default: driver failed to report `mode' property: -22
[ 4.543319] [0: kworker/u16:2: 1272] TMU is busy.
[ 4.547452] [0: kworker/u16:2: 1272] TMU is busy.
[ 4.552262] [0: kworker/u16:2: 1272] TMU is busy.
[ 4.557707] [0: kworker/u16:2: 1272] exynos-tmu 10130000.tmuctrl_CPUCL1: [ECT]hotplug_threshold : 96
[ 4.566514] [0: kworker/u16:2: 1272] TMU is busy.
[ 4.571416] [0: kworker/u16:2: 1272] TMU is busy.
[ 4.576202] [0: kworker/u16:2: 1272] TMU is busy.
[ 4.581721] [0: kworker/u16:2: 1272] TMU is busy.
[ 4.585994] [0: kworker/u16:2: 1272] TMU is busy.
[ 4.590799] [0: kworker/u16:2: 1272] TMU is busy.
[ 4.596185] [1: swapper/0: 1] otg_wakelock_init: No USB transceiver found
[ 4.604917] [5: swapper/0: 1] conn_gadget_function_init(#) call conn_gadget_setup
[ 4.611986] [5: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt: usb30_redriver_en: Invalied gpio pins
[ 4.621989] [5: swapper/0: 1] usb_notify: register_usblog_proc already registered
[ 4.630209] [5: swapper/0: 1] manager_notifier_init already registered
[ 4.641406] [0: swapper/0: 1] exynos_get_idle_ip_list: Cannot find fix-idle-ip property
[ 4.653612] [0: swapper/0: 1] s2mu004-fuelgauge 10-003b: s2mu004_get_rawsoc: OTP 4E(f6) 4F(1f) current 4E(f6) 4F(1f)
[ 4.736779] [0: swapper/0: 1] sec_battery_probe: Fail to set psy ((null))
[ 4.736980] [0: swapper/0: 1] sec_battery_probe: Fail to s2mu004-charger set (41=>-22)
[ 4.738120] [0: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin gpf4-2 already requested by 139b0000.pinctrl; cannot claim for spi2.0
[ 4.743822] [0: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin-163 (spi2.0) status -22
[ 4.752974] [0: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: could not request pin 163 (gpf4-2) from group gpf4-2 on device samsung-pinctrl
[ 4.766594] [0: swapper/0: 1] ssp spi2.0: Error applying setting, reverse things back
[ 4.775413] [0: swapper/0: 1] [SSP] ssp_parse_dt( 440): project is default
[ 4.783704] [0: swapper/0: 1] [SSP] initialize_variable( 74): initialize_variable.
[ 4.792348] [5: swapper/0: 1] [SSP] init accelerometer_sensor iio dev, type = 1
[ 4.800189] [5: swapper/0: 1] [SSP] init geomagnetic_sensor iio dev, type = 2
[ 4.808058] [5: swapper/0: 1] [SSP] init gyro_sensor iio dev, type = 4
[ 4.815333] [5: swapper/0: 1] [SSP] init light_sensor iio dev, type = 5
[ 4.822681] [5: swapper/0: 1] [SSP] init pressure_sensor iio dev, type = 6
[ 4.830310] [5: swapper/0: 1] [SSP] init proximity_sensor iio dev, type = 8
[ 4.838031] [5: swapper/0: 1] [SSP] init uncal_geomagnetic_sensor iio dev, type = 14
[ 4.846519] [5: swapper/0: 1] [SSP] init uncal_gyro_sensor iio dev, type = 16
[ 4.854446] [5: swapper/0: 1] [SSP] init sig_motion_sensor iio dev, type = 17
[ 4.862327] [5: swapper/0: 1] [SSP] init step_det_sensor iio dev, type = 18
[ 4.870043] [5: swapper/0: 1] [SSP] init step_cnt_sensor iio dev, type = 19
[ 4.877766] [5: swapper/0: 1] [SSP] init geomagnetic_rotation_vector_sensor iio dev, type = 20
[ 4.887137] [5: swapper/0: 1] [SSP] init tilt_detector iio dev, type = 22
[ 4.894670] [5: swapper/0: 1] [SSP] init pickup_gesture iio dev, type = 25
[ 4.902326] [5: swapper/0: 1] [SSP] init geomagnetic_power iio dev, type = 30
[ 4.910216] [5: swapper/0: 1] [SSP] init interrupt_gyro_sensor iio dev, type = 31
[ 4.918454] [5: swapper/0: 1] [SSP] init scontext_iio iio dev, type = 32
[ 4.925899] [5: swapper/0: 1] [SSP] init light_cct_sensor iio dev, type = 34
[ 4.947805] [6: kworker/u16:3: 1605] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x11, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95
[ 4.985409] [6: kworker/u16:3: 1605] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x1f, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95
[ 5.015637] [6: kworker/u16:3: 1605] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x1f, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95
[ 5.045581] [6: kworker/u16:3: 1605] sec-battery battery: sec_bat_get_temperature_by_adc: Temp(235), Temp-ADC(2096)
[ 5.046363] [6: kworker/u16:3: 1605] sec-battery battery: sec_bat_get_temperature_by_adc: Temp(235), Temp-ADC(2096)
[ 5.051518] [6: kworker/u16:3: 1605] sec-battery battery: sec_bat_get_temperature_by_adc: Temp(265), Temp-ADC(1938)
[ 5.063414] [6: kworker/u16:3: 1605] s2mu004-fuelgauge 10-003b: s2mu004_get_rawsoc: OTP 4E(f6) 4F(1f) current 4E(f6) 4F(1f)
[ 5.175515] [6: kworker/u16:3: 1605] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x1f, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95
[ 5.443175] [5: swapper/0: 1] [SSP] initialize_mcu( 134): is_shutdown = 0
[ 5.496728] [5: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_disable (count = 1)
[ 5.512554] [0: swapper/0: 1] wlan_platform_sdio_enumerate: notify_func=ffffffc00054a5d0, mmc_host_dev=ffffffc0bab15418, device_present=1
[ 5.512706] [0: swapper/0: 1] card inserted
/init: line 234: can't create /proc/sys/kernel/printk_devkmsg: nonexistent directory
[ 5.816373] [3: init_2nd.sh: 1] android_usb: already disabled
/init_2nd.sh: line 89: can't create /proc/sys/kernel/printk_devkmsg: nonexistent directory
OpenRC 0.62.6 is starting up Linux 3.18.14 (aarch64)
Reference in New Issue View Git Blame Copy Permalink