sunxi: Hookup OTG USB controller support

Hookup OTG USB controller support and enable the otg controller + USB-keyb
on various tablets.

This allows tablet owners to interact with u-boot without needing to solder
a serial console onto their tablet PCB.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

board/sunxi/Kconfig

@@ -357,6 +357,15 @@ config VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828
 endchoice
 
 
+config USB_MUSB_SUNXI
+	bool "Enable sunxi OTG / DRC USB controller in host mode"
+	default n
+	---help---
+	Say y here to enable support for the sunxi OTG / DRC USB controller
+	used on almost all sunxi boards. Note currently u-boot can only have
+	one usb host controller enabled at a time, so enabling this on boards
+	which also use the ehci host controller will result in build errors.
+
 config USB_KEYBOARD
 	boolean "Enable USB keyboard support"
 	default y

board/sunxi/board.c

@@ -28,7 +28,9 @@
 #include <asm/arch/dram.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/usbc.h>
 #include <asm/io.h>
+#include <linux/usb/musb.h>
 #include <net.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -209,6 +211,26 @@ void sunxi_board_init(void)
 }
 #endif
 
+#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 6,
+	.ram_bits       = 11,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_MUSB_HOST)
+	.mode           = MUSB_HOST,
+#else
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config         = &musb_config,
+	.power          = 250,
+	.platform_ops	= &sunxi_musb_ops,
+};
+#endif
+
 #ifdef CONFIG_MISC_INIT_R
 int misc_init_r(void)
 {
@@ -228,6 +250,9 @@ int misc_init_r(void)
 		eth_setenv_enetaddr("ethaddr", mac_addr);
 	}
 
+#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+	musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
+#endif
 	return 0;
 }
 #endif