smallsolar/u-boot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

at91: Introduction of at91sam9g10 SOC.

Browse Source 
AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
This commit is contained in:
Sedji Gaouaou
2009-06-25 17:04:15 +02:00
committed by Jean-Christophe PLAGNIOL-VILLARD
parent 22ee647380
commit 5ccc2d99d6
8 changed files with 66 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

36
board/atmel/at91sam9261ek/at91sam9261ek.c
View File

@@ -57,6 +57,16 @@ static void at91sam9261ek_nand_hw_init(void)
csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* Configure SMC CS3 for NAND/SmartMedia */
#ifdef CONFIG_AT91SAM9G10EK
at91_sys_write(AT91_SMC_SETUP(3),
AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
at91_sys_write(AT91_SMC_PULSE(3),
AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) |
AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7));
at91_sys_write(AT91_SMC_CYCLE(3),
AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
#else
at91_sys_write(AT91_SMC_SETUP(3),
AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
@@ -65,6 +75,7 @@ static void at91sam9261ek_nand_hw_init(void)
AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
at91_sys_write(AT91_SMC_CYCLE(3),
AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
#endif
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
@@ -92,6 +103,21 @@ static void at91sam9261ek_nand_hw_init(void)
static void at91sam9261ek_dm9000_hw_init(void)
{
/* Configure SMC CS2 for DM9000 */
#ifdef CONFIG_AT91SAM9G10EK
at91_sys_write(AT91_SMC_SETUP(2),
AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) |
AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0));
at91_sys_write(AT91_SMC_PULSE(2),
AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) |
AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8));
at91_sys_write(AT91_SMC_CYCLE(2),
AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20));
at91_sys_write(AT91_SMC_MODE(2),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
AT91_SMC_TDF_(1));
#else
at91_sys_write(AT91_SMC_SETUP(2),
AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
@@ -105,6 +131,7 @@ static void at91sam9261ek_dm9000_hw_init(void)
AT91_SMC_EXNWMODE_DISABLE |
AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
AT91_SMC_TDF_(1));
#endif
/* Configure Reset signal as output */
at91_set_gpio_output(AT91_PIN_PC10, 0);
@@ -169,7 +196,11 @@ static void at91sam9261ek_lcd_hw_init(void)
at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
#ifdef CONFIG_AT91SAM9G10EK
gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE;
#else
gd->fb_base = AT91SAM9261_SRAM_BASE;
#endif
}
#ifdef CONFIG_LCD_INFO
@@ -207,8 +238,13 @@ int board_init(void)
/* Enable Ctrlc */
console_init_f();
#ifdef CONFIG_AT91SAM9G10EK
/* arch number of AT91SAM9G10EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK;
#else
/* arch number of AT91SAM9261EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
#endif
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;