bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
Introduce BSH SystemMaster (SMM) S2 board family, which consists of: iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards. Add support for iMX8MN BSH SMM S2 board: - 256 MiB DDR3 RAM - 512MiB Nand - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Add support for iMX8MN BSH SMM S2 PRO board: - 512 MiB DDR3 RAM - 8 GiB eMMC - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
This commit is contained in:
committed by
Stefano Babic
parent
a2f5c9366a
commit
6c317fedc7
61
doc/board/bsh/imx8mn_bsh_smm_s2.rst
Normal file
61
doc/board/bsh/imx8mn_bsh_smm_s2.rst
Normal file
@@ -0,0 +1,61 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
imx8mn_bsh_smm_s2
|
||||
=================
|
||||
|
||||
U-Boot for the BSH SystemMaster (SMM) S2 board family.
|
||||
|
||||
Quick Start
|
||||
-----------
|
||||
|
||||
- Build the ARM Trusted firmware binary
|
||||
- Get firmware-imx package
|
||||
- Build U-Boot
|
||||
- Boot
|
||||
|
||||
Get and Build the ARM Trusted firmware
|
||||
--------------------------------------
|
||||
|
||||
Note: srctree is U-Boot source directory
|
||||
Get ATF from: https://github.com/ARM-software/arm-trusted-firmware
|
||||
tag: v2.5
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ make PLAT=imx8mn IMX_BOOT_UART_BASE=0x30a60000 bl31
|
||||
$ cp build/imx8mn/release/bl31.bin $(srctree)
|
||||
|
||||
Get the ddr firmware
|
||||
--------------------
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
|
||||
$ chmod +x firmware-imx-8.9.bin
|
||||
$ ./firmware-imx-8.9
|
||||
$ cp firmware-imx-8.9/firmware/ddr/synopsys/ddr3*.bin $(srctree)
|
||||
|
||||
Build U-Boot
|
||||
------------
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ export CROSS_COMPILE=aarch64-linux-gnu-
|
||||
$ make imx8mn_bsh_smm_s2_defconfig
|
||||
$ make
|
||||
|
||||
Burn the flash.bin to MicroSD card offset 32KB:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
|
||||
|
||||
Boot
|
||||
----
|
||||
|
||||
Start the board in USB serial downloader mode, plug-in the USB-OTG port and
|
||||
load flash.bin using Freescale/NXP UUU tool:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ uuu -v flash.bin
|
||||
9
doc/board/bsh/index.rst
Normal file
9
doc/board/bsh/index.rst
Normal file
@@ -0,0 +1,9 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
BSH Hausgeraete GmbH
|
||||
====================
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 2
|
||||
|
||||
imx8mn_bsh_smm_s2
|
||||
@@ -15,6 +15,7 @@ Board-specific doc
|
||||
armltd/index
|
||||
atmel/index
|
||||
broadcom/index
|
||||
bsh/index
|
||||
congatec/index
|
||||
coreboot/index
|
||||
emulation/index
|
||||
|
||||
Reference in New Issue
Block a user