configs: am62x_evm_a53_defconfig: Enable MMC UHS modes

Enable configs required to enable MMC UHS modes in A53 SPL
and U-Boot proper.

Signed-off-by: Judith Mendez <jm@ti.com>

configs/am62x_evm_a53_defconfig

@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_K3=y
 CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
@@ -9,6 +10,7 @@ CONFIG_TARGET_AM625_A53_EVM=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
 CONFIG_SF_DEFAULT_SPEED=25000000
+CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am625-sk"
 CONFIG_SPL_TEXT_BASE=0x80080000
@@ -43,6 +45,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
+CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_POWER_DOMAIN=y
@@ -76,9 +79,21 @@ CONFIG_DFU_SF=y
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_SPL_DM_GPIO_LOOKUP_LABEL=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_SPL_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_OMAP24XX=y
 CONFIG_DM_MAILBOX=y
 CONFIG_K3_SEC_PROXY=y
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_SPL_MMC_HS200_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ADMA=y
 CONFIG_SPL_MMC_SDHCI_ADMA=y
@@ -99,6 +114,12 @@ CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR_GPIO=y
 CONFIG_K3_SYSTEM_CONTROLLER=y
 CONFIG_REMOTEPROC_TI_K3_ARM64=y
 CONFIG_RESET_TI_SCI=y