mmc: exynos_dw_mmc: Improve coding style

Fix most of checkpatch warnings and other obvious style issues.

No functional change.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
This commit is contained in:
Sam Protsenko
2024-08-07 22:14:41 -05:00
committed by Minkyu Kang
parent 549afd7f32
commit 9bedead15a
2 changed files with 29 additions and 33 deletions

View File

@@ -45,7 +45,7 @@ struct exynos_dwmmc_variant {
u32 quirks; /* quirk flags - see DWMCI_QUIRK_... */
};
/* Exynos implmentation specific drver private data */
/* Exynos implementation specific driver private data */
struct dwmci_exynos_priv_data {
#ifdef CONFIG_DM_MMC
struct dwmci_host host;
@@ -121,10 +121,7 @@ static int exynos_dwmmc_set_sclk(struct dwmci_host *host, unsigned long rate)
return 0;
}
/*
* Function used as callback function to initialise the
* CLKSEL register for every mmc channel.
*/
/* Configure CLKSEL register with chosen timing values */
static int exynos_dwmci_clksel(struct dwmci_host *host)
{
struct dwmci_exynos_priv_data *priv = exynos_dwmmc_get_priv(host);
@@ -163,7 +160,7 @@ static u8 exynos_dwmmc_get_ciu_div(struct dwmci_host *host)
& DWMCI_DIVRATIO_MASK) + 1;
}
unsigned int exynos_dwmci_get_clk(struct dwmci_host *host, uint freq)
static unsigned int exynos_dwmci_get_clk(struct dwmci_host *host, uint freq)
{
unsigned long sclk;
u8 clk_div;
@@ -204,7 +201,6 @@ static void exynos_dwmci_board_init(struct dwmci_host *host)
MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
}
/* Set to timing value at initial time */
if (priv->sdr_timing)
exynos_dwmci_clksel(host);
}
@@ -214,8 +210,8 @@ static int exynos_dwmmc_of_to_plat(struct udevice *dev)
{
struct dwmci_exynos_priv_data *priv = dev_get_priv(dev);
struct dwmci_host *host = &priv->host;
int err = 0;
u32 div, timing[2];
int err;
priv->chip = (struct exynos_dwmmc_variant *)dev_get_driver_data(dev);
@@ -223,9 +219,8 @@ static int exynos_dwmmc_of_to_plat(struct udevice *dev)
const void *blob = gd->fdt_blob;
int node = dev_of_offset(dev);
/* Extract device id for each mmc channel */
/* Obtain device ID for current MMC channel */
host->dev_id = pinmux_decode_periph_id(blob, node);
host->dev_index = dev_read_u32_default(dev, "index", host->dev_id);
if (host->dev_index == host->dev_id)
host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
@@ -241,10 +236,6 @@ static int exynos_dwmmc_of_to_plat(struct udevice *dev)
host->dev_index = 2; /* SD card */
#endif
/* Get the bus width from the device node (Default is 4bit buswidth) */
host->buswidth = dev_read_u32_default(dev, "bus-width", 4);
/* Set the base address from the device node */
host->ioaddr = dev_read_addr_ptr(dev);
if (!host->ioaddr) {
printf("DWMMC%d: Can't get base address\n", host->dev_index);
@@ -255,17 +246,17 @@ static int exynos_dwmmc_of_to_plat(struct udevice *dev)
div = priv->chip->div;
else
div = dev_read_u32_default(dev, "samsung,dw-mshc-ciu-div", 0);
err = dev_read_u32_array(dev, "samsung,dw-mshc-sdr-timing", timing, 2);
if (err) {
printf("DWMMC%d: Can't get sdr-timings\n", host->dev_index);
return -EINVAL;
}
priv->sdr_timing = DWMCI_SET_SAMPLE_CLK(timing[0]) |
DWMCI_SET_DRV_CLK(timing[1]) |
DWMCI_SET_DIV_RATIO(div);
/* sdr_timing didn't assigned anything, use the default value */
/* sdr_timing wasn't set, use the default value */
if (!priv->sdr_timing) {
if (host->dev_index == 0)
priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
@@ -284,6 +275,7 @@ static int exynos_dwmmc_of_to_plat(struct udevice *dev)
DWMCI_SET_DIV_RATIO(div);
}
host->buswidth = dev_read_u32_default(dev, "bus-width", 4);
host->fifo_depth = dev_read_u32_default(dev, "fifo-depth", 0);
host->bus_hz = dev_read_u32_default(dev, "clock-frequency", 0);
@@ -396,8 +388,8 @@ U_BOOT_DRIVER(exynos_dwmmc_drv) = {
.of_match = exynos_dwmmc_ids,
.of_to_plat = exynos_dwmmc_of_to_plat,
.bind = exynos_dwmmc_bind,
.ops = &dm_dwmci_ops,
.probe = exynos_dwmmc_probe,
.ops = &dm_dwmci_ops,
.priv_auto = sizeof(struct dwmci_exynos_priv_data),
.plat_auto = sizeof(struct exynos_mmc_plat),
};