Add a command to display malloc heap statistics, showing total heap
size and memory currently in use.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add a new 'backtrace' command which prints the current call stack, which
is useful for debugging. The command is enabled by CONFIG_CMD_BACKTRACE
Add docs and a test.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
There are quite a few media devices in test.dts which are not enabled by
default, so are not bound on startup. Sometimes it is useful to be able
to use these from the command line.
Add 'sb devon' and 'sb devoff' subcommands to enable and disable devices
from the device tree. For example, running sandbox with -T, then
'sb devon mmc11' enables the mmc11 device mentioned in test.dts
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
There is already a Python test. Add a few C tests as well, for bootstage
itself and for the 'bootstage' command.
Add helpers to access the internal state. Be careful to zero records
when removing them, since if the record is later reused, bootstage
expects the time to be zero.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new 'tkey' command that provides an interface to interact with
Tillitis TKey security tokens. Subcommands include:
- info: Display device information (UDI, name, version, mode)
- load: Load and run applications on the TKey
- pubkey: Get the public key from a signer app
- getkey: Derive disk encryption keys with password and USS
This command enables U-Boot to use TKey devices for secure key
derivation for full-disk encryption.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a simple command which supports showing the information which
goes into calculating a CHID. The information is obtained entirely from
SMBIOS tables at present.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Create a sandbox test for the smbios command. This checks that the
expected output is produced.
Drop the unnecessary 0x before each address, since U-Boot uses hex by
default.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the command to show the size and selected file, since this is
useful information at times. Add a heading so it is clear what each
field refers to.
Add a simple test as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
These tests are designed to work on sandbox only. The truetype font
changes the current font, which QEMU targets may not support. The
meminfo test assumes a particular memory size.
Mark them as sandbox-only.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
This test doesn't belong at the top level. Move it into the lib/
directory, since that is where compression is implemented.
Rename it to just 'command', since it is obviously a unit test and the
_ut suffix does not add much except to make it different from the names
of other test files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> # rpi_3, rpi_4, rpi_arm64, am64x_evm_a53, am64-sk
Currently, the "dm" suite in unit tests (ut) is only available on
sandbox. Make sure that all cmd tests that are part of this suite are
only available on sandbox and not attempted to be run on hardware (where
it will fail to be able to be started).
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
U-Boot has a fairly rigid memory map which is normally not visible
unless debugging is enabled in board_f.c
Update the 'meminfo' command to show it. This command does not cover
arch-specific pieces but gives a good overview of where things are.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to obtain the results of MSR queries as well as to update
MSR registers, so add a command these tasks.
Signed-off-by: Simon Glass <sjg@chromium.org>
Prepare the introduction of the lwIP (lightweight IP) TCP/IP stack by
adding a new net/lwip/ directory and the NET_LWIP symbol. Network
support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent
commits will introduce the lwIP code, re-work the NETDEVICE integration
and port some of the NET commands and features to lwIP.
SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols
that are part of NET (such as arp_init(), arp_timeout_check(),
arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be
added later.
Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP
because of dependencies on net_loop(), tftp_timeout_ms,
tftp_timeout_count_max and other NET things. Let's add a dependency on
!NET_LWIP for now.
SANDBOX can select NET_LWIP but doing so will currently disable the eth
dm tests as well as the wget tests which have strong dependencies on the
NET code.
Other adjustments to Kconfig files are made to fix "unmet direct
dependencies detected" for USB_FUNCTION_SDP and CMD_FASTBOOT when
the default networking stack is set to NET_LWIP ("default NET_LWIP"
instead of "default NET" in Kconfig).
The networking stack is now a choice between NO_NET,
NET and NET_LWIP. Therefore '# CONFIG_NET is not set' should be
'CONFIG_NO_NET=y'. Adjust the defconfigs accordingly.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add a new suite for 'cmd' tests, used for testing commands. These are
kept in the test/cmd directory.
For now it is empty, but it will be used for coreboot-command tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Current code allows up to 3 MBR partitions without extended one.
If more than 3 partitions are required, then extended partition(s)
must be used.
This commit allows up to 4 primary MBR partitions without the
need for extended partition.
Add mbr test unit. In order to run the test manually, mmc6.img file
of size 12 MiB or greater is required in the same directory as u-boot.
Test also runs automatically via ./test/py/test.py tool.
Running mbr test is only supported in sandbox mode.
Signed-off-by: Alex Gendin <agendin@matrox.com>
[ And due to some further changes for testing ]
Signed-off-by: Simon Glass <sjg@chromium.org>
There is a function for this but it is never used. Showing the history is
a useful feature, so add a new 'history' command.
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide armffa command showcasing the use of the U-Boot FF-A support
armffa is a command showcasing how to invoke FF-A operations.
This provides a guidance to the client developers on how to
call the FF-A bus interfaces. The command also allows to gather secure
partitions information and ping these partitions. The command is also
helpful in testing the communication with secure partitions.
For more details please refer to the command documentation [1].
A Sandbox test is provided for the armffa command.
[1]: doc/usage/cmd/armffa.rst
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
This reverts commit d927d1a808, reversing
changes made to c07ad9520c.
These changes do not pass CI currently.
Signed-off-by: Tom Rini <trini@konsulko.com>
Adds a test for the new pci_mps command to ensure that it can set the
Maximum Payload Size (MPS) of all devices to 256 bytes in the sandbox
environment. Enables the pci_mps command in the sandbox environment so
that this test can be run.
Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Add a command to load SEAMA (Seattle Image), a NAND flash
on-flash storage format.
This type of flash image is found in some D-Link routers such
as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and
DCH-M225, as well as in WD and NEC routers on the ath79
(MIPS), Broadcom BCM53xx, and RAMIPS platforms.
This U-Boot command will read and decode a SEAMA image from
raw NAND flash on any platform. As it is always using big endian
format for the data decoding is always necessary on platforms
such as ARM.
The command is needed to read a SEAMA-encoded boot image on the
D-Link DIR-890L router for boot from NAND flash in an upcoming
port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx)
architecture.
A basic test and documentation is added as well. The test must
be run on a target with NAND flash support and at least one
resident SEAMA image in flash.
Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a test which validates that exit from environment script works as
expected, including return value propagation and clipping to positive
integers.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Add a new 'font' command which allows the fonts to be listed as well as
selecting a different font and size.
Allow the test to run on sandbox, where multiple font/size combinations
are supported, as well as sandbox_flattree, where they are not.
Signed-off-by: Simon Glass <sjg@chromium.org>
The test relies on memory being available at 0x0. This in not valid for
many boards.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This command is being introduced with the goal of allowing user-friendly
"generic use case" U-Boot builds to pause until user input under some
situations.
The main use case would be when a boot failure happens, to pause until
the user has had time to acknowledge the current state.
Tested using:
make && ./u-boot -v -T -c 'ut lib lib_test_hush_pause'
Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
Cc: Simon Glass <sjg@chromium.org>
Add a basic test of the 'fdt addr' command, to kick things off.
This includes a new convenience function to run a command from a printf()
string.
Signed-off-by: Simon Glass <sjg@chromium.org>
cp.b is used a lot as a way to load binaries to memory and execute
them, however we may need to integrate this with the efi subsystem to
set it up as a bootdev.
So, introduce a loadm command that will be consistent with the other
loadX commands and will call the efi API's.
ex: loadm $kernel_addr $kernel_addr_r $kernel_size
with this a kernel with CONFIG_EFI_STUB enabled will be loaded and
then subsequently booted with bootefi command.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Allow pin name parameter for pimux staus command,
as gpio command to get status of one pin.
The possible usage of the command is:
> pinmux dev pinctrl
> pinmux status
> pinmux status -a
> pinmux status <pin-name>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
test/cmd/setexpr.c cannot be linked with CONFIG_CMD_SETEXPR=n:
ld.bfd: test/built-in.o: in function `setexpr_test_sub':
test/cmd/setexpr.c:227: undefined reference to `setexpr_regex_sub'
ld.bfd: test/built-in.o: in function `setexpr_test_backref':
test/cmd/setexpr.c:267: undefined reference to `setexpr_regex_sub'
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add the command "pwm" for controlling the pwm channels. This
command provides pwm invert/config/enable/disable functionalities
via PWM uclass drivers
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This command currently has no tests. Add some for basic assignment and the
integer operations.
Note that the default size for setexpr is ulong, which varies depending on
the build machine. So for sandbox on a 64-bit host, this means that the
default size is 64 bits.
Signed-off-by: Simon Glass <sjg@chromium.org>
