So far this subcommand is undocumented. Provide some notes.
Also show a better error when 'efidebug boot rm' fails.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a -s option to sort the memory map in order of address. Add
documentation while we are here. Also fix an errant extra line before
do_efi_show_media()
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Adjust the code slightly to support the final subcommand in efidebug
that is currently unavailable in the app: 'efidebug drivers'.
Drop the now-unused app_not_supported() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new column to the 'efidebug media' command that shows the likely
uclass for each EFI media device based on its device path.
This uses the new efi_dp_guess_uclass() function which looks through an
EFI device-path to determine the corresponding uclass.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
If a component name is available, show it, along with the supported
languages.
Also indicate at the top if the handle is a driver, rather than listing
that protocol at the end.
Signed-off-by: Simon Glass <sjg@chromium.org>
Make use of the boot-time services rather than internal functions, so
that the app can implement this command.
Signed-off-by: Simon Glass <sjg@chromium.org>
The 'efidebug dh' command dereferences a handle to obtain the device
name.
The format of an EFI handle is not defined by the spec, so when running
in the app we cannot assume that the handle can be dereferenced. Even if
the EFI provider happens to be U-Boot it might be a different version.
So don't try display the device name with the app.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than accessing the EFI loader's structure, create an
efi_get_boot() function to match that used by the app, so that the
call to protocols_per_handle() can operate in the app as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Even if this is a subtle dig at EFI, it is only used once and there is
not much benefit in retaining it. Access the system-table directly,
instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
The intend of this macro is to debug calls from an app. But the efidebug
command is not an app, so it really doesn't make a lot of sense to call
via that macro. Remove EFI_CALL() from do_efi_show_handles() so that the
app can use this code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Seeing the boot order is useful in the app. Everything we need is
present except an implementation of efi_query_variable_info_int(), so
add that and enable 'efidebug boot dump'.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to be able to see the available tables in the app, so
enable this subcommand. Provide an implementation of efi_get_sys_table()
that works for the EFI loader.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is helpful to see the memory map in some cases, so enable this
subcommand in the app.
Unfortunately we cannot assume that desc_size is the same in the
underlying EFI implementation, so use a variable for that.
Signed-off-by: Simon Glass <sjg@chromium.org>
This command is useful for the app, so enable it. For now most of the
subcommands don't work, so provide a message in that case. This seems
better than silently pretending that the subcommand doesn't exist.
Signed-off-by: Simon Glass <sjg@chromium.org>
This exported symbol has a very generic name. Rename it to indicate that
it relates to EFI and device-paths.
Fix checkpatch warnings related to use of multiple assignments.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
These functions are useful for the EFI app. As a first step towards
making these available outside lib/efi_loader, create a separate header
file and include it where needed. Add proper comments to the functions,
since many are missing at present.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
As we now also store device-tree device-paths in load options rename
struct efi_initrd_dp to efi_lo_dp_prefix.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
We already support creating a load option where the device-path
field contains the concatenation of the binary device-path and
optionally the device path of the initrd which we expose via the
EFI_LOAD_FILE2_PROTOCOL.
Allow to append another device-path pointing to the device-tree
identified by the device-tree GUID.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Allow appending a device-path to a device-path that contains an end node
as separator. We need this feature for creating boot options specifying
kernel, initrd, and dtb.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
EFI_CALL() invokes __efi_entry_check() which executes set_gd(efi_gd).
There is no need to execute set_gd(efi_gd) again via efi_restore_gd().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
At this point, EFI boot manager interfaces is fully independent from
bootefi command. So just rename the configuration parameter.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
After calling efi_alloc() we must check that the return value is not NULL.
Fixes: f01c961ee3 ("cmd: efidebug: add uri device path")
Addresses-Coverity-ID: 477185 Dereference null return value
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Looking back at the initrd storing functionality, we introduced three
functions, efi_dp_append_or_concatenate(), efi_dp_append/concat(). In
hindsight we could have simplified that by a lot. First of all none of
the functions append anything. They all allocate a new device path and
concatenate the contents of two device paths in one. A boolean parameter
controls the final device path -- if that's true an end node is injected
between the two device paths.
So let's rewrite this and make it a bit easier to read. Get rid of
efi_dp_append(), efi_dp_concat() and rename
efi_dp_append_or_concatenate() to efi_dp_concat(). This is far more
intuitive and the only adjustment that is needed is an extra boolean
argument on all callsites.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Now it is clear that the command actually depends on interfaces,
not "bootefi bootmgr" command.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
This adds the URI device path option for 'boot add' subcommand.
User can add the URI load option for downloading ISO image file
or EFI application through network. Currently HTTP is only supported.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This code is used with EFI_LOADER but is also useful (with some
modifications) for the EFI app and payload. Move it into a shared
file.
Show the address of the table so it can be examined if needed. Also show
the table name as unknown if necessary. Our list of GUIDs is fairly
small.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some commands need to enumerate the existing UEFI load
option variable("Boot####"). This commit transfers some code
from cmd/efidebug.c to lib/efi_loder/, then exposes
efi_varname_is_load_option() function to check whether
the UEFI variable name is "Boot####".
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
EFI_LOADER_DATA/CODE is reserved for EFI applications.
Memory allocated by U-Boot for internal usage should be
EFI_BOOT_SERVICES_DATA or _CODE or EFI_RUNTIME_SERVICES_DATA or _CODE.
Reported-by: François-Frédéric Ozog <ff@ozog.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: François-Frédéric Ozog <ff@ozog.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
* don't use EFI_CALL() for variable services
* don't use runtime pointer to access exported function
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Currently we have subcommands 'efidebug dh' which shows protocols per
handle and 'efidebug devices' which shows the device path. None shows which
U-Boot device matches the handle.
Change 'efidebug dh' to show the device path and the U-Boot device if any
is associated with the handle.
Remove 'efidebug devices'.
Old output of 'efidebug dh':
Handle Protocols
================ ====================
000000001b22e690 Device Path, Block IO
000000001b22e800 Device Path, Block IO, system, Simple File System
New output of 'efidebug dh':
000000001b22e690 (host0)
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/VenHw(bbe4e671-5773-4ea1-9aab-3a7dbf40c482,00)
Block IO
000000001b22e800 (host0:1)
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/VenHw(bbe4e671-5773-4ea1-9aab-3a7dbf40c482,00)/HD(1,GPT,7e5c17c5-3f5f-49d0-ae96-511b21d7f273,0x800,0x3f7df)
Block IO
system
Simple File System
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Currently message is not intended that prompt end up at the end of debug
line. For example like this:
DFU alt info setting: done
DFU entities configuration failed!
(partition table does not match dfu_alt_info?)
Firmware update failed: <NULL>
Cannot handle a capsule at 10000000Zynq>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Disable 'capsule disk-update' option for the efidebug command
when CONFIC_EFI_CAPSULE_ON_DISK is disabled, because this option
is available only when the EFI capsule update on disk is enabled.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The GUID of partitions is sufficient for identification and will stay
constant in the lifetime of a boot option. The preceding path of the
device-path may change due to changes in the enumeration of devices.
Therefore it is preferable to use the short-form of device-paths in load
options. Adjust the 'efidebug boot add' command accordingly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
