It is annoying to have disk images in the source directory since it
clutters up the working space.
Remove cur_dir=True from DiskHelper calls so disk images are written to
the persistent-data directory instead.
Move scsi.img too (used by the bootstd tests) and mmc6.img (used by the
MBR tests.
Add a few comments as to where the images are used.
This keeps the source tree clean and puts disk images in the same place
as other test data.
Co-developed-by: Claude Opus 4.5 <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
On 64bit systems the timer value might be truncated to a 32bit value
causing malfunctions. For example on ARM the timer might start from 0
again only after a cold reset. The 32bit overflow occurs after a bit
more than 49 days (1000 Hz counter) so booting after that time may lead
to a surprise because the board might become stuck requiring a cold
reset.
Signed-off-by: Ronald Wahl <ronald.wahl@legrand.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
(cherry picked from commit 822afeb7bf)
The correct spelling is R-Car, including the dash, update the usage.
Comment changes only, no functional change.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
(cherry picked from commit 190c6d05e8)
If mmc_init() fails, the buffer allocated by calloc() or mapped by
os_map_file() is not freed.
Free or unmap the buffer before returning the error.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
The rk3576 uses a different base-compatible, as starting with this
generation, the clock phase tuning is done via registers inside
the mmc controller and not from inside the CRU.
In U-Boot we do not tune at all, so no other code changes are
necessary.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add support for RK3576 to the rockchip sdhci driver.
It's pretty similar to its cousins found in the RK3568 and RK3588 and the
specific hs400-tx-tap number was taken from the vendor-u-boot.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Enable clock stopping to gate clock during phase code change to ensure
glitch free phase switching in auto-tuning circuit. Fixes HS200 mode
on RK3528.
POST_CHANGE_DLY
Time taken for phase switching and stable clock output.
- Less than 4-cycle latency
PRE_CHANGE_DLY
Maximum Latency specification between transmit clock and receive clock.
- Less than 4-cycle latency
TUNE_CLK_STOP_EN
Clock stopping control for Tuning and auto-tuning circuit. When enabled,
clock gate control output is pulled low before changing phase select
codes. This effectively stops the receive clock. Changing phase code
when clocks are stopped ensures glitch free phase switching.
- Clocks stopped during phase code change
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add initial support for SDHCI controller in RK3528.
Only MMC Legacy and MMC High Speed (52MHz) mode is supported after this,
more work is needed to get the faster HS200/HS400/HS400ES modes working.
Variant tap and delay num is copied from vendor Linux tag
linux-6.1-stan-rkr5.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
RK3528 and RK3576 use different tap and delay num for cmdout and strbin.
Move tap and delay num for cmdout and strbin to driver data to prepare
for adding new SoCs.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The BLK symbol has a few meanings, one of which is that it controls the
driver model portion of a "block device". Rather than having this hidden
symbol be "default y if ..." it should be select'd by the various block
subsystems. Symbols such as PVBLOCK which already select'd BLK are
unchanged".
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
Each MMC device has a child which ihs a block device. At present we call
mmc_deinit() when the block device is removed.
But the MMC struct (i.e. struct mmc) is attached to the MMC's device,
not its child.
So at present, when an MMC device is removed, mmc_deinit() is called
twice, once for the MMC device and once for its block device. This
results in a double call to cyclic_unregister().
Fix this by adding a 'remove' method to the uclass and calling
mmc_deinit() from there.
Also drop the call to device_probe() within the block-device's probe()
method. The device is already in the process of being probed, so this
call does nothing.
Series-to: u-boot
Series-cc: marek
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: c822c1a50b ("mmc: call device_probe() after scanning")
VPL may want to use driver model for MMC even if TPL does not. Update
the rule in this driver to support that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
On earlier platforms, the vqmmc regulator was enabled by the
previous bootloader, but on the newest (SM8650) it's not
and we need vqmmc to be enabled in order to have the card
to respond.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
After the recent dts/upstream subtree merge, the sdhi compatible string
used in the device tree for RZ/G2L family SoCs is "renesas,rzg2l-sdhi"
not "renesas,rcar-gen3-sdhi". This broke the ability to access the eMMC
and SD card devices on RZ/G2L boards.
Fix this by adding the new compatible string to the sdhi driver.
Fixes: 136b7b6d2e ("Subtree merge tag 'v6.11-dts' of dts repo [1] into dts/upstream")
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Convert to using livetree API functions.
Without this if livetree is enabled (OF_LIVE) the fsl_esdhc_imx
driver will fail to read vendor-specific properties from the dt.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
The commit 0252924ac6 ("mmc: dw_mmc: Extract FIFO data transfer into a
separate routine") unintentionally changed behavior of the FIFO data
transfer routine.
When data is read and size reaches 0 the original loop would wait on
DWMCI_INTMSK_DTO or timeout. The remaining size to read and buf position
is no longer tracked across dwmci_data_transfer_fifo() calls and because
of this an extra call to fifo() and dwmci_fifo_ready() may now trigger a
FIFO underflow timeout error and slows down FIFO reading.
Buswidth = 4, clock: 50000000
Sending CMD16
Sending CMD17
dwmci_fifo_ready: FIFO underflow timeout
Sending CMD16
Sending CMD18
dwmci_fifo_ready: FIFO underflow timeout
Sending CMD12
## Checking hash(es) for config config-1 ... OK
This reverts commit 0252924ac6 to restore
the old working behavior.
Fixes: 0252924ac6 ("mmc: dw_mmc: Extract FIFO data transfer into a separate routine")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # RK3588 Tiger
Reviewed-by: Simon Glass <sjg@chromium.org>
Raymond Mao <raymond.mao@linaro.org> says:
Integrate MbedTLS v3.6 LTS (currently v3.6.0) with U-Boot.
Motivations:
------------
1. MbedTLS is well maintained with LTS versions.
2. LWIP is integrated with MbedTLS and easily to enable HTTPS.
3. MbedTLS recently switched license back to GPLv2.
Prerequisite:
-------------
This patch series requires mbedtls git repo to be added as a
subtree to the main U-Boot repo via:
$ git subtree add --prefix lib/mbedtls/external/mbedtls \
https://github.com/Mbed-TLS/mbedtls.git \
v3.6.0 --squash
Moreover, due to the Windows-style files from mbedtls git repo,
we need to convert the CRLF endings to LF and do a commit manually:
$ git add --renormalize .
$ git commit
New Kconfig options:
--------------------
`MBEDTLS_LIB` is for MbedTLS general switch.
`MBEDTLS_LIB_CRYPTO` is for replacing original digest and crypto libs with
MbedTLS.
`MBEDTLS_LIB_CRYPTO_ALT` is for using original U-Boot crypto libs as
MbedTLS crypto alternatives.
`MBEDTLS_LIB_X509` is for replacing original X509, PKCS7, MSCode, ASN1,
and Pubkey parser with MbedTLS.
By default `MBEDTLS_LIB_CRYPTO_ALT` and `MBEDTLS_LIB_X509` are selected
when `MBEDTLS_LIB` is enabled.
`LEGACY_CRYPTO` is introduced as a main switch for legacy crypto library.
`LEGACY_CRYPTO_BASIC` is for the basic crypto functionalities and
`LEGACY_CRYPTO_CERT` is for the certificate related functionalities.
For each of the algorithm, a pair of `<alg>_LEGACY` and `<alg>_MBEDTLS`
Kconfig options are introduced. Meanwhile, `SPL_` Kconfig options are
introduced.
In this patch set, MBEDTLS_LIB, MBEDTLS_LIB_CRYPTO and MBEDTLS_LIB_X509
are by default enabled in qemu_arm64_defconfig and sandbox_defconfig
for testing purpose.
Patches for external MbedTLS project:
-------------------------------------
Since U-Boot uses Microsoft Authentication Code to verify PE/COFFs
executables which is not supported by MbedTLS at the moment,
addtional patches for MbedTLS are created to adapt with the EFI loader:
1. Decoding of Microsoft Authentication Code.
2. Decoding of PKCS#9 Authenticate Attributes.
3. Extending MbedTLS PKCS#7 lib to support multiple signer's certificates.
4. MbedTLS native test suites for PKCS#7 signer's info.
All above 4 patches (tagged with `mbedtls/external`) are submitted to
MbedTLS project and being reviewed, eventually they should be part of
MbedTLS LTS release.
But before that, please merge them into U-Boot, otherwise the building
will be broken when MBEDTLS_LIB_X509 is enabled.
See below PR link for the reference:
https://github.com/Mbed-TLS/mbedtls/pull/9001
Miscellaneous:
--------------
Optimized MbedTLS library size by tailoring the config file
and disabling all unnecessary features for EFI loader.
From v2, original libs (rsa, asn1_decoder, rsa_helper, md5, sha1, sha256,
sha512) are completely replaced when MbedTLS is enabled.
From v3, the size-growth is slightly reduced by refactoring Hash functions.
From v6, smaller implementations for SHA256 and SHA512 are enabled and
target size reduce significantly.
Target(QEMU arm64) size-growth when enabling MbedTLS:
v1: 6.03%
v2: 4.66%
v3 - v5: 4.55%
v6: 2.90%
Tests done:
-----------
EFI Secure Boot test (EFI variables loading and verifying, EFI signed image
verifying and booting) via U-Boot console.
EFI Secure Boot and Capsule sandbox test passed.
Known issues:
-------------
None.
Link: https://lore.kernel.org/u-boot/20241003215112.3103601-1-raymond.mao@linaro.org/
Adapt digest header files to support both original libs and MbedTLS
by switching on/off MBEDTLS_LIB_CRYPTO.
Introduce <alg>_LEGACY kconfig for legacy hash implementations.
sha256.o should depend on SHA256 kconfig only but not SUPPORT_EMMC_RPMB,
SHA256 should be selected when SUPPORT_EMMC_RPMB is enabled instead.
`IS_ENABLED` or `CONFIG_IS_ENABLED` is not applicable here, since
including <linux/kconfig.h> causes undefined reference on schedule()
with sandbox build, as <linux/kconfig.h> includes <generated/autoconf.h>
which enables `CONFIG_HW_WATCHDOG` and `CONFIG_WATCHDOG` but no schedule()
are defined in sandbox build,
Thus we use `#if defined(CONFIG_MBEDTLS_LIB_CRYPTO)` instead.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
When supporting partition reset for SoC such as i.MX95 , the Linux
Kernel may have configured the tuning, while after force reset by
wdog or else, uboot CMD0 will never pass unless config RSTT to reset
tuning logic.
Since RSTA and RSTT are independent, so need both to be reseted in the
controller.
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The memory of priv and plat are leaked if max_bus_width is wrong.
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The plat->cfg is wrongly memset to 0, so the host_caps value configured
in fsl_esdhc_initialize is reset. Remove the unnecessary memset since
plat is allocated via calloc.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
According to SD and MMC spec, 74 clocks must be sent to device after
power stable. This is need in reinit ops for DM MMC or init ops for
non-DM MMC after power cycle.
So set the INTIA to send 80 clocks in esdhc_init_common and move
its calling from probe to reinit.
However, on 8MQ EVK and 8QXP MEK with some brands of SD cards, sending
80 clocks may not work well.
The root cause is related with power up time. According to spec, after
power stable, host shall supply at least 74 SD clocks to the SD card with
the maximum of 1ms. However, the power ram up time is related with the
characteristic of SD card. At the moment of sending 74 SD clocks, the
power probably not ram up to the operating level on the problematic
cards. Then cause the cards not ready.
This patch changes to send SD clock with 1ms duration to replace 80
SD clocks (0.2ms at 400Khz clock).
This way meets the spec requirement as well, and adds the margin for
power ram up time to be compatible with the problematic SD cards.
This is also aligned with implementation which has FORCE clock
always on.
Reviewed-and-tested-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
With partition reset supported for i.MX8QM/QXP/95 and etc, when linux
mmc runtime suspended, the mmc clks are gated off. While at same time
system controller reset Cortex-A cores because of various reasons(
WDOG timeout and etc), with SPL run again, only enable PER clk is not
enough, also need to enable AHB/IPG clk, here use clk bulk API to enable
all the clocks.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Allow MMC init when clock support is not enabled in a particular phase.
Refactor the setting of priv->emmc_clk so it is a bit clearer.
Signed-off-by: Simon Glass <sjg@chromium.org>
In case the cyclic framework is enabled, poll the card detect of already
initialized cards and deinitialize them in case they are removed. Since
the card initialization is a longer process and card initialization is
done on first access to an uninitialized card anyway, avoid initializing
newly detected uninitialized cards in the cyclic callback.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The JH7110 SoC uses a GPIO for card detect.
* In the of_to_plat function check if a cd-gpios definition exists and
request the GPIO.
* In the getcd function return the GPIO value in this case.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
After resetting the host controller, program in the POR val for this
register just like the Linux driver does.
This seems to help with initialization when running U-Boot as the primary
bootloader on some boards.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Per JESD84-B51 P47, host need to change frequency to <=52MHz
after setting HS_TIMING to 0x1, and host need to set the
8-bit DDR buswidth. Currently setting the frequency to 26MHz
and trying to switch 8-bit DDR buswidth resulting timeouts.
mmc dev 1 0
Select HS400 failed -110
switch to partitions #0, OK
mmc1(part 0) is current device
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Tim Harvey <tharvey@gateworks.com> says:
Modern eMMC v4+ devices have multiple hardware partitions per the JEDEC
specification described as:
Boot Area Partition 1
Boot Area Partition 2
RPMB Partition
General Purpose Partition 1
General Purpose Partition 2
General Purpose Partition 3
General Purpose Partition 4
User Data Area
These are referenced by fields in the PARTITION_CONFIG register
(Extended CSD Register 179) which is defined as:
bit 7: reserved
bit 6: BOOT_ACK
0x0: No boot acknowledge sent (default
0x1: Boot acknowledge sent during boot operation Bit
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Note that setting PARTITION_ACCESS to 0x0 results in selecting the User
Data Area partition.
You can see above that the two fields BOOT_PARTITION_ENABLE and
PARTITION_ACCESS do not use the same enumerated values.
U-Boot uses a set of macros to access fields of the PARTITION_CONFIG
register:
EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)
EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0)
EXT_CSD_BOOT_ACK(x) (x << 6)
EXT_CSD_BOOT_PART_NUM(x) (x << 3)
EXT_CSD_PARTITION_ACCESS(x) (x << 0)
EXT_CSD_EXTRACT_BOOT_ACK(x) (((x) >> 6) & 0x1)
EXT_CSD_EXTRACT_BOOT_PART(x) (((x) >> 3) & 0x7)
EXT_CSD_EXTRACT_PARTITION_ACCESS(x) ((x) & 0x7)
There are various places in U-Boot where the BOOT_PARTITION_ENABLE field
is accessed via EXT_CSD_EXTRACT_PARTITION_ACCESS and converted to a
hardware partition consistent with the definition of the
PARTITION_ACCESS field used by the various mmc_switch incarnations.
To add some sanity to the distinction between BOOT_PARTITION_ENABLE
(used to specify the active device on power-cycle) and PARTITION_ACCESS
(used to switch between hardware partitions) create two enumerated types
and use them wherever struct mmc * part_config is used or the above
macros are used.
Additionally provide arrays of the field names and allow those to be
used in the 'mmc partconf' command and in board support files.
The first patch adds enumerated types and makes use of them which
represents no compiled code change.
The 2nd patch adds the array of names and uses them in the 'mmc
partconf' command.
The 3rd patch uses the array of hardware partition names in a board
support file to show what emmc hardware partition U-Boot is being loaded
from.
eMMC v4+ devices have hardware partitions that are accessed via the
PARTITION_CONFIG (Extended CSD Register 179) PARTITION_ACCESS
and BOOT_PARTITION_ENABLE fields defined as:
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Add char arrays to provide names for these values.
Use these names which displaying or setting the PARTITION_CONFIG
register via the 'mmc partconf' command.
Before:
u-boot=> mmc partconf 2 1 1 0 && mmc partconf 2
EXT_CSD[179], PARTITION_CONFIG:
BOOT_ACK: 0x1
BOOT_PARTITION_ENABLE: 0x2
PARTITION_ACCESS: 0x0
After:
u-boot=> mmc partconf 2 1 1 0 && mmc partconf 2
EXT_CSD[179], PARTITION_CONFIG:
BOOT_ACK: 0x1
BOOT_PARTITION_ENABLE: 0x1 (boot0)
PARTITION_ACCESS: 0x0 (user)
u-boot=> mmc partconf 2 1 boot1 0 && mmc partconf 2
EXT_CSD[179], PARTITION_CONFIG:
BOOT_ACK: 0x1
BOOT_PARTITION_ENABLE: 0x2 (boot1)
PARTITION_ACCESS: 0x0 (user)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Use the log subsystem instead of dev, to avoid including function names
in the code.
The CONFIG_LOGF_FUNC option can be used to enable the function name.
Update 'enhanced size' to use hex since this is the U-Boot default and
more natural for the large numbers involved.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
The code makes quite a few uses of __func__ which puts the function
name into the resulting SPL image. Use the log subsystem instead, to
reduce size.
The CONFIG_LOGF_FUNC option can be used to enable the function name.
Use lower-case hex for the status output in sdhci_transfer_data(), to
match sdhci_send_command()
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Fix most of checkpatch warnings and other obvious style issues.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Reduce U-Boot footprint by reusing dev->name as a driver's displayed
name. This changes boot device name (and "mmc info" output) from "EXYNOS
DWMMC" to something like "mmc@12100000".
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
add_dwmci() is already calling dwmci_setup_cfg() internally, there is no
needed to call dwmci_setup_cfg() again in case when add_dwmci() is used
(for non-DM cases). Fix it by calling dwmci_setup_cfg() only in DM
cases, when add_dwmci() wasn't called. Also, this assignment:
host->mmc = &plat->mmc;
is wrong in non-DM case when add_dwmci() was called, as it's creating
mmc object internally. Fix that by pulling that assignment into DM case,
when add_dwmci() isn't called.
While at it, add also this missing assignment:
host->mmc->dev = dev;
Fixes: 3537ee879e ("mmc: exynos_dw_mmc: support the Driver mode for Exynos")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
