0b97a394f6
The YModem support in SPL was never really used on this device, the SDP support is much more convenient on i.MX8M Mini based hardware. Replace the YModem support with SDP support. The SDP can be utilized by forcing the board into SDP boot mode by grounding test point right next to silkscreen label U30, and then by using mfgtools 'uuu -brun spl flash.bin' once the device enumerates on host system USB bus. The SDP capable USB port is available on the USB micro-B port on the base board. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
34 lines
1005 B
Plaintext
34 lines
1005 B
Plaintext
#include <configs/imx8m_data_modul.config>
|
|
|
|
CONFIG_ARM=y
|
|
CONFIG_ARCH_IMX8M=y
|
|
CONFIG_TARGET_IMX8MM_DATA_MODUL_EDM_SBC=y
|
|
CONFIG_CI_UDC=y
|
|
CONFIG_CLK_IMX8MM=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="imx8mm-data-modul-edm-sbc"
|
|
CONFIG_DEFAULT_FDT_FILE="imx8mm-data-modul-edm-sbc.dtb"
|
|
CONFIG_DM_PMIC_BD71837=y
|
|
CONFIG_DM_REGULATOR_BD71837=y
|
|
CONFIG_IMX_CONFIG="board/data_modul/imx8mm_edm_sbc/imximage.cfg"
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PREBOOT="run dmo_preboot"
|
|
CONFIG_SDP_LOADADDR=0x60000000
|
|
CONFIG_SPL_BSS_MAX_SIZE=0x2000
|
|
CONFIG_SPL_BSS_START_ADDR=0x910000
|
|
CONFIG_SPL_MAX_SIZE=0x30000
|
|
CONFIG_SPL_CLK_IMX8MM=y
|
|
CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
|
|
CONFIG_SPL_DM_PMIC_BD71837=y
|
|
CONFIG_SPL_DM_REGULATOR_BD71837=y
|
|
CONFIG_SPL_DM_USB=y
|
|
CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
|
|
CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
|
|
CONFIG_SPL_RAM_DEVICE=y
|
|
CONFIG_SPL_STACK=0x920000
|
|
CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
|
|
CONFIG_SPL_TEXT_BASE=0x7E1000
|
|
CONFIG_SPL_USB_GADGET=y
|
|
CONFIG_SPL_USB_HOST=y
|
|
CONFIG_SPL_USB_SDP_SUPPORT=y
|
|
CONFIG_SYS_LOAD_ADDR=0x60000000
|