22 lines
1.1 KiB
Markdown
22 lines
1.1 KiB
Markdown
# CubeCellRepeater
|
|
|
|
This is the code for a simple repeater node for the meshtastic project: https://github.com/meshtastic
|
|
|
|
The actual node can be one of the LoRa CubeCell nodes by Heltec Automation: https://github.com/HelTecAutomation/ASR650x-Arduino/
|
|
|
|
Notes:
|
|
|
|
Will repeat packets ONCE. To prevent flooding a short list of received packet IDs is checked against the ID of the current packet.
|
|
Keep in mind that re-sending packets will cause the initial sender to assume that the packet is "received" or at least in the mesh.
|
|
If no other meshtastic node is in range of either the node or the repeater, the message will still be shown as received.
|
|
You can use this for range tests.
|
|
|
|
Will work only for the channel "Default" with setting "Very long range (but slow)"!
|
|
Modify radio settings for your own channels.
|
|
|
|
Will work with any packet meeting the radio settings, but the serial output is based on the assumption that the node receives meshtastic packets.
|
|
|
|
Will only send serial data, if "#define SILENT" is deleted, commented or set to another value (e.g. VERBOSE).
|
|
|
|
Comment "#include <Arduino.h>" when using the Arduino IDE. The include is needed when using platform.io.
|