24 lines
1.2 KiB
Markdown
24 lines
1.2 KiB
Markdown
# CubeCellRepeater
|
|
|
|
This is the code for a simple repeater node for the meshtastic project: https://github.com/meshtastic
|
|
|
|
The actual node can be one of the LoRa CubeCell nodes by Heltec Automation: https://github.com/HelTecAutomation/ASR650x-Arduino/
|
|
|
|
Notes:
|
|
|
|
Intended for use with the platform.io IDE. Serial output speed is 115200.
|
|
See the provided platformio.ini for built-in environments. Default is cubecell_board.
|
|
|
|
Will repeat packets ONCE with HopLimit reduced by one. To prevent flooding the last repeated packet ID will not be repeated again.
|
|
If the HopLimit was already 0, the packet will not be repeated.
|
|
|
|
Keep in mind that re-sending packets will cause the initial sender to assume that the packet is "received" or at least in the mesh.
|
|
If no other meshtastic node is in range of either the node or the repeater, the message will still be shown as received.
|
|
|
|
Will work with most packets meeting the radio settings, but the serial output is based on the assumption that the node receives meshtastic packets.
|
|
Minimum size for none-Meshtastic packets is 14 bytes.
|
|
|
|
"#define SILENT" in main.h to stop serial output.
|
|
|
|
Modifying radio settings for your own radio settings: edit the main.h
|