Readme: Fixes link format to RST
This commit is contained in:
@@ -1,7 +1,7 @@
|
||||
RPI_SGP30
|
||||
=========
|
||||
|
||||
Program to read eCO_2 and TVOC from the [SGP30 sensor](https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/9_Gas_Sensors/Sensirion_Gas_Sensors_SGP30_Datasheet_EN.pdf). Based on the smbus2 i2c library for ease of use.
|
||||
Program to read eCO_2 and TVOC from the `SGP30 sensor <https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/9_Gas_Sensors/Sensirion_Gas_Sensors_SGP30_Datasheet_EN.pdf>`_. Based on the smbus2 i2c library for ease of use.
|
||||
|
||||
|
||||
Quick usage-example:
|
||||
@@ -35,5 +35,5 @@ Features that are known to be missing (listing in rough order of importance):
|
||||
|
||||
Hardware notices:
|
||||
-----------------
|
||||
If you have the AdaFruit board with built in level shifters and voltage regulator it is should work if you just plug in [SDA to pin 3, SCL to pin 5, VCC to pin 17 and GND to pin 20](https://pinout.xyz/pinout/i2c). You should then be able to find the SGP30 an address 0x58 using `i2cdetect -y 1`. If you get an error message you probbably need to enable i2c in the kernel using [`raspi-config` and reboot](https://learn.sparkfun.com/tutorials/raspberry-pi-spi-and-i2c-tutorial)
|
||||
If you have the AdaFruit board with built in level shifters and voltage regulator it is should work if you just plug in `SDA to pin 3, SCL to pin 5, VCC to pin 17 and GND to pin 20 <https://pinout.xyz/pinout/i2c>`_. You should then be able to find the SGP30 an address 0x58 using `i2cdetect -y 1`. If you get an error message you probbably need to enable i2c in the kernel using `raspi-config and reboot <https://learn.sparkfun.com/tutorials/raspberry-pi-spi-and-i2c-tutorial>`_
|
||||
|
||||
|
Reference in New Issue
Block a user