initial cleanup and mapping

wiringPi/wiringSerial.c

@@ -0,0 +1,213 @@
+/*
+ * wiringSerial.c:
+ *	Handle a serial port
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <string.h>
+#include <termios.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include "wiringSerial.h"
+
+/*
+ * serialOpen:
+ *	Open and initialise the serial port, setting all the right
+ *	port parameters - or as many as are required - hopefully!
+ *********************************************************************************
+ */
+
+int serialOpen (const char *device, const int baud)
+{
+  struct termios options ;
+  speed_t myBaud ;
+  int     status, fd ;
+
+  switch (baud)
+  {
+    case     50:	myBaud =     B50 ; break ;
+    case     75:	myBaud =     B75 ; break ;
+    case    110:	myBaud =    B110 ; break ;
+    case    134:	myBaud =    B134 ; break ;
+    case    150:	myBaud =    B150 ; break ;
+    case    200:	myBaud =    B200 ; break ;
+    case    300:	myBaud =    B300 ; break ;
+    case    600:	myBaud =    B600 ; break ;
+    case   1200:	myBaud =   B1200 ; break ;
+    case   1800:	myBaud =   B1800 ; break ;
+    case   2400:	myBaud =   B2400 ; break ;
+    case   4800:	myBaud =   B4800 ; break ;
+    case   9600:	myBaud =   B9600 ; break ;
+    case  19200:	myBaud =  B19200 ; break ;
+    case  38400:	myBaud =  B38400 ; break ;
+    case  57600:	myBaud =  B57600 ; break ;
+    case 115200:	myBaud = B115200 ; break ;
+    case 230400:	myBaud = B230400 ; break ;
+
+    default:
+      return -2 ;
+  }
+
+  if ((fd = open (device, O_RDWR | O_NOCTTY | O_NDELAY | O_NONBLOCK)) == -1)
+    return -1 ;
+
+  fcntl (fd, F_SETFL, O_RDWR) ;
+
+// Get and modify current options:
+
+  tcgetattr (fd, &options) ;
+
+    cfmakeraw   (&options) ;
+    cfsetispeed (&options, myBaud) ;
+    cfsetospeed (&options, myBaud) ;
+
+    options.c_cflag |= (CLOCAL | CREAD) ;
+    options.c_cflag &= ~PARENB ;
+    options.c_cflag &= ~CSTOPB ;
+    options.c_cflag &= ~CSIZE ;
+    options.c_cflag |= CS8 ;
+    options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG) ;
+    options.c_oflag &= ~OPOST ;
+
+    options.c_cc [VMIN]  =   0 ;
+    options.c_cc [VTIME] = 100 ;	// Ten seconds (100 deciseconds)
+
+  tcsetattr (fd, TCSANOW | TCSAFLUSH, &options) ;
+
+  ioctl (fd, TIOCMGET, &status);
+
+  status |= TIOCM_DTR ;
+  status |= TIOCM_RTS ;
+
+  ioctl (fd, TIOCMSET, &status);
+
+  usleep (10000) ;	// 10mS
+
+  return fd ;
+}
+
+
+/*
+ * serialFlush:
+ *	Flush the serial buffers (both tx & rx)
+ *********************************************************************************
+ */
+
+void serialFlush (const int fd)
+{
+  tcflush (fd, TCIOFLUSH) ;
+}
+
+
+/*
+ * serialClose:
+ *	Release the serial port
+ *********************************************************************************
+ */
+
+void serialClose (const int fd)
+{
+  close (fd) ;
+}
+
+
+/*
+ * serialPutchar:
+ *	Send a single character to the serial port
+ *********************************************************************************
+ */
+
+void serialPutchar (const int fd, const unsigned char c)
+{
+  write (fd, &c, 1) ;
+}
+
+
+/*
+ * serialPuts:
+ *	Send a string to the serial port
+ *********************************************************************************
+ */
+
+void serialPuts (const int fd, const char *s)
+{
+  write (fd, s, strlen (s)) ;
+}
+
+/*
+ * serialPrintf:
+ *	Printf over Serial
+ *********************************************************************************
+ */
+
+void serialPrintf (const int fd, const char *message, ...)
+{
+  va_list argp ;
+  char buffer [1024] ;
+
+  va_start (argp, message) ;
+    vsnprintf (buffer, 1023, message, argp) ;
+  va_end (argp) ;
+
+  serialPuts (fd, buffer) ;
+}
+
+
+/*
+ * serialDataAvail:
+ *	Return the number of bytes of data avalable to be read in the serial port
+ *********************************************************************************
+ */
+
+int serialDataAvail (const int fd)
+{
+  int result ;
+
+  if (ioctl (fd, FIONREAD, &result) == -1)
+    return -1 ;
+
+  return result ;
+}
+
+
+/*
+ * serialGetchar:
+ *	Get a single character from the serial device.
+ *	Note: Zero is a valid character and this function will time-out after
+ *	10 seconds.
+ *********************************************************************************
+ */
+
+int serialGetchar (const int fd)
+{
+  uint8_t x ;
+
+  if (read (fd, &x, 1) != 1)
+    return -1 ;
+
+  return ((int)x) & 0xFF ;
+}