smallsolar/solar_cluster
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add a5y17lte/linux3.8.140_boot.log

Browse Source
This commit is contained in:
smallsolar
2025-11-09 20:01:31 +00:00
parent 722613b704
commit 4037c4510c
1 changed files with 465 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

465
a5y17lte/linux3.8.140_boot.log Normal file
View File

@@ -0,0 +1,465 @@
Samsung S-Boot 4.0 for SM-A520F (Nov 27 2020 - 11:58:22 36271825)
EXYNOS7880 EVT 0.1 (Base on ARM CortexA50)
3044MB / 0MB / Rev 10 / A520FXXUGCTKA / (PKG_ID 0xe7880202) / LOT_ID S74B1 / SHIP /SW_RST (0x20000000)
MON: 0x6c(5)
MON[0] = (5)[0x1d, 0x38]
MON[1] = (6)[0x1f, 0x18]
MON[2] = (7)[0x2a, 0x84]
MON[3] = (0)[0x33, 0xd0]
MON[4] = (1)[0x34, 0x0a]
MON[5] = (2)[0x37, 0x0a]
MON[6] = (3)[0x1e, 0x4c]
MON[7] = (4)[0x0a, 0x00]
__init_microusb_ic
[MUIC] muic_register_s2mu004_apis
Try 0 : [MUIC] muic_id:0x038.
-> matched(s2mu004).
MUIC rev = S2MU004(56), evt8
s2mu004_muic_get_adc_value: ADC:0x1f
s2mu004_init_microusb_ic: MUIC: CONTROL writing success.
s2mu004_init_microusb_ic: MUIC: CONTROL:0x17
s2mu004_init_microusb_ic: MUIC: TIMING3: 0x8d
s2mu004_muic_get_attached_device: INT[1:0x00, 2:0x00]
s2mu004_muic_get_attached_device: DEV[1:0x04, 2:0x00, 3:0x00]
ccic_register_s2mu004:
ccic_is_s2mu004:
ccic_is_s2mu004: reg:b2 - val:00 ret:00
get_vbvolt: apple: 0x07, dev3: 0x00
get_vbvolt: vbvolt: 0x02
ccic_register_s2mu004: BEFORE VBUS(2)
s2mu004_ccic_set_normal_mode:
s2mu004_ccic_set_normal_mode: 27 10
s2mu004_ccic_check_pd_ta: POWER NEGO CHECK!
s2mu004_ccic_check_pd_ta: S2MU004_REG_RID at FIRST : 0
s2mu004_ccic_set_normal_mode:
s2mu004_ccic_set_normal_mode: 27 10
s2mu004_ccic_check_jig: S2MU004_REG_RID at SECOND : 0
s2mu004 found.
mach_board_initialize: Active ccic device.
s2mu004_muic_get_attached_device: INT[1:0x00, 2:0x00]
s2mu004_muic_get_attached_device: DEV[1:0x04, 2:0x00, 3:0x00]
ifconn_init: CCIC Mode
ifconn_get_jig_status: CCIC Mode
ccic_read_adc:
s2mu004_read_adc:
s2mu004_read_adc: RID = 00(RID_0)
ifconn_is_ccic_jig_device: rid=00
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuacct
[ 0.000000] [0: swapper: 0] Linux version 3.18.140 (pmos@node0) (gcc version 6.4.0 (postmarketOS 6.4.0) ) #16-postmarketOS SMP PREEMPT Sun Nov 9 19:26:59 UTC 2025
[ 0.000000] [0: swapper: 0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] [0: swapper: 0] [ECT] Address 67feb000, Size 14000
[ 0.000000] [0: swapper: 0] Early serial console at I/O port 0x0 (options '115200n8')
[ 0.000000] [0: swapper: 0] bootconsole [uart0] enabled
[ 0.000000] [0: swapper: 0] charging_mode() : 0x0(0)
[ 0.000000] [0: swapper: 0] modem_if_reserved_mem_setup: memory reserved: paddr=1744830464, t_size=121634816
[ 0.000000] [0: swapper: 0] deliver_cp_reserved_mem_setup: memory reserved: paddr=1744826368, t_size=4096
[ 0.000000] [0: swapper: 0] WARNING: x1-x3 nonzero in violation of boot protocol:
[ 0.000000] [0: swapper: 0] x1: 0000000000000000
[ 0.000000] [0: swapper: 0] x2: 0000000000000000
[ 0.000000] [0: swapper: 0] x3: 0000000040001000
[ 0.000000] [0: swapper: 0] This indicates a broken bootloader or old kernel
[ 0.000000] [0: swapper: 0] sec_debug: set magic code (0x66262564)
[ 0.000000] [0: swapper/0: 0] cal_dfs_get_rate : dvfs_cam reference count is zero
[ 0.000000] [0: swapper/0: 0] cal_dfs_get_rate : dvfs_disp reference count is zero
[ 0.665061] [0: swapper/0: 1] exynos_set_debug_mem: alloc kmem for smc_dbg virt: 0x0000000000000000 phys: 0x0000000000000000 size: 4096.
[ 0.677955] [0: swapper/0: 1] exynos_set_debug_mem: Can not set the address to el3 monitor. ret = 0xffffffff. free the kmem
[ 0.723006] [0: swapper/0: 1] platform 14821000.vpp: create IOVMM device node : vpp
[ 0.731303] [0: swapper/0: 1] platform 14822000.vpp: create IOVMM device node : vpp
[ 0.739740] [0: swapper/0: 1] platform 14823000.vpp: create IOVMM device node : vpp
[ 0.748143] [0: swapper/0: 1] platform 14824000.vpp: create IOVMM device node : vpp
[ 0.756751] [0: swapper/0: 1] platform 14480000.fimc_is: create IOVMM device node : fimc_is
[ 0.765753] [0: swapper/0: 1] platform 14420000.fimc_is_sensor: create IOVMM device node : fimc_is_sensor
[ 0.776077] [0: swapper/0: 1] platform 14460000.fimc_is_sensor: create IOVMM device node : fimc_is_sensor
[ 0.786573] [0: swapper/0: 1] platform 12c10000.scaler: create IOVMM device node : scaler
[ 0.795406] [0: swapper/0: 1] platform 12c00000.scaler: create IOVMM device node : scaler
[ 0.804340] [0: swapper/0: 1] platform 12c20000.smfc: create IOVMM device node : smfc
[ 0.813088] [0: swapper/0: 1] platform 12c30000.mfc0: create IOVMM device node : mfc0
[ 0.879158] [0: swapper/0: 1] s3c64xx-spi 13920000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.889209] [0: swapper/0: 1] s3c64xx-spi 100c0000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.899301] [0: swapper/0: 1] s3c64xx-spi 13930000.spi: spi clkoff-time 0
[ 1.167186] [1: swapper/0: 1] can't find pms value for rate(98304000Hz) of AUD_PLL
[ 1.175271] [1: swapper/0: 1] p1_set error(p1_aud_pll) (98304000)
[ 1.182289] [1: swapper/0: 1] [CAL]cal_vclk_set_rate failed.
[ 1.189044] [1: swapper/0: 1] [CAL]cal_vclk_set_rate failed.
[ 1.195533] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_enable (count = 1)
[ 1.203895] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_enable: LPASS is not available
[ 1.213482] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_probe Completed
[ 1.586118] [3: swapper/0: 1] mst_drv_init
[ 1.591370] [3: swapper/0: 1] MST_DRV]]] gpio pwr en inited
[ 1.597615] [3: swapper/0: 1] sec_mst_gpio_init : Send Output
[ 1.604051] [3: swapper/0: 1] mst_ldo_device_probe
[ 1.609795] [3: swapper/0: 1] MST_LDO_DRV]]] init , ret val : 0
[ 1.619358] [3: swapper/0: 1] exynos-mipi-phy 148f100c.phy_m4s4_dsi: Creating exynos-mipi-phy
[ 1.628917] [3: swapper/0: 1] exynos-mipi-phy 144f1040.phy_isp_csi: Creating exynos-mipi-phy
[ 1.647511] [0: swapper/0: 1] samsung,uart-logging enabled
[ 1.653891] [0: swapper/0: 1] samsung-uart 13810000.uart: could not get bt uart pinctrl
[ 1.663044] [0: swapper/0: 1] Call trace:
[ 1.668168] [0: swapper/0: 1] samsung,uart-logging disabled
[ 0.000000] [0: swapper: 0] charging_mode() : 0x0(0)
[ 0.000000] [0: swapper: 0] modem_if_reserved_mem_setup: memory reserved: paddr=1744830464, t_size=121634816
[ 0.000000] [0: swapper: 0] deliver_cp_reserved_mem_setup: memory reserved: paddr=1744826368, t_size=4096
[ 0.000000] [0: swapper: 0] WARNING: x1-x3 nonzero in violation of boot protocol:
[ 0.000000] [0: swapper: 0] x1: 0000000000000000
[ 0.000000] [0: swapper: 0] x2: 0000000000000000
[ 0.000000] [0: swapper: 0] x3: 0000000040001000
[ 0.000000] [0: swapper: 0] This indicates a broken bootloader or old kernel
[ 0.000000] [0: swapper: 0] sec_debug: set magic code (0x66262564)
[ 0.000000] [0: swapper/0: 0] cal_dfs_get_rate : dvfs_cam reference count is zero
[ 0.000000] [0: swapper/0: 0] cal_dfs_get_rate : dvfs_disp reference count is zero
[ 0.665061] [0: swapper/0: 1] exynos_set_debug_mem: alloc kmem for smc_dbg virt: 0x0000000000000000 phys: 0x0000000000000000 size: 4096.
[ 0.677955] [0: swapper/0: 1] exynos_set_debug_mem: Can not set the address to el3 monitor. ret = 0xffffffff. free the kmem
[ 0.723006] [0: swapper/0: 1] platform 14821000.vpp: create IOVMM device node : vpp
[ 0.731303] [0: swapper/0: 1] platform 14822000.vpp: create IOVMM device node : vpp
[ 0.739740] [0: swapper/0: 1] platform 14823000.vpp: create IOVMM device node : vpp
[ 0.748143] [0: swapper/0: 1] platform 14824000.vpp: create IOVMM device node : vpp
[ 0.756751] [0: swapper/0: 1] platform 14480000.fimc_is: create IOVMM device node : fimc_is
[ 0.765753] [0: swapper/0: 1] platform 14420000.fimc_is_sensor: create IOVMM device node : fimc_is_sensor
[ 0.776077] [0: swapper/0: 1] platform 14460000.fimc_is_sensor: create IOVMM device node : fimc_is_sensor
[ 0.786573] [0: swapper/0: 1] platform 12c10000.scaler: create IOVMM device node : scaler
[ 0.795406] [0: swapper/0: 1] platform 12c00000.scaler: create IOVMM device node : scaler
[ 0.804340] [0: swapper/0: 1] platform 12c20000.smfc: create IOVMM device node : smfc
[ 0.813088] [0: swapper/0: 1] platform 12c30000.mfc0: create IOVMM device node : mfc0
[ 0.879158] [0: swapper/0: 1] s3c64xx-spi 13920000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.889209] [0: swapper/0: 1] s3c64xx-spi 100c0000.spi: spi clkoff-time is empty(Default: 0ms)
[ 0.899301] [0: swapper/0: 1] s3c64xx-spi 13930000.spi: spi clkoff-time 0
[ 1.167186] [1: swapper/0: 1] can't find pms value for rate(98304000Hz) of AUD_PLL
[ 1.175271] [1: swapper/0: 1] p1_set error(p1_aud_pll) (98304000)
[ 1.182289] [1: swapper/0: 1] [CAL]cal_vclk_set_rate failed.
[ 1.189044] [1: swapper/0: 1] [CAL]cal_vclk_set_rate failed.
[ 1.195533] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_enable (count = 1)
[ 1.203895] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_enable: LPASS is not available
[ 1.213482] [1: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_probe Completed
[ 1.586118] [3: swapper/0: 1] mst_drv_init
[ 1.591370] [3: swapper/0: 1] MST_DRV]]] gpio pwr en inited
[ 1.597615] [3: swapper/0: 1] sec_mst_gpio_init : Send Output
[ 1.604051] [3: swapper/0: 1] mst_ldo_device_probe
[ 1.609795] [3: swapper/0: 1] MST_LDO_DRV]]] init , ret val : 0
[ 1.619358] [3: swapper/0: 1] exynos-mipi-phy 148f100c.phy_m4s4_dsi: Creating exynos-mipi-phy
[ 1.628917] [3: swapper/0: 1] exynos-mipi-phy 144f1040.phy_isp_csi: Creating exynos-mipi-phy
[ 1.647511] [0: swapper/0: 1] samsung,uart-logging enabled
[ 1.653891] [0: swapper/0: 1] samsung-uart 13810000.uart: could not get bt uart pinctrl
[ 1.663044] [0: swapper/0: 1] Call trace:
[ 1.668168] [0: swapper/0: 1] samsung,uart-logging disabled
[ 2.015516] [1: swapper/0: 1] Call trace:
[ 2.015516] [1: swapper/0: 1] Call trace:
[ 2.044632] [1: swapper/0: 1] Call trace:
[ 2.044632] [1: swapper/0: 1] Call trace:
[ 2.062689] [0: swapper/0: 1] mcu_ipc 10600000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start.
[ 2.062689] [0: swapper/0: 1] mcu_ipc 10600000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start.
[ 2.071900] [0: swapper/0: 1] mcu_ipc 10600000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done.
[ 2.071900] [0: swapper/0: 1] mcu_ipc 10600000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done.
[ 2.090138] [0: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start.
[ 2.090138] [0: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start.
[ 2.108224] [0: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: Failed to get affinity mask
[ 2.108224] [0: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: Failed to get affinity mask
[ 2.125541] [0: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: Can't set IRQ affinity with(-19)
[ 2.125541] [0: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: Can't set IRQ affinity with(-19)
[ 2.142806] [0: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done.
[ 2.142806] [0: swapper/0: 1] mcu_ipc 10670000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done.
[ 2.161369] [0: swapper/0: 1] shm_ipc shmem@F0000000: shm_probe: shmem driver init
[ 2.161369] [0: swapper/0: 1] shm_ipc shmem@F0000000: shm_probe: shmem driver init
[ 2.178030] [0: swapper/0: 1] shm_ipc shmem@F0000000: paddr=1744830464, t_size=121634816, ipc_off=117440512, ipc_size=4194304
[ 2.178030] [0: swapper/0: 1] shm_ipc shmem@F0000000: paddr=1744830464, t_size=121634816, ipc_off=117440512, ipc_size=4194304
[ 2.198756] [0: swapper/0: 1] uart_sel_probe: uart_sel probe start.
[ 2.198756] [0: swapper/0: 1] uart_sel_probe: uart_sel probe start.
[ 2.217489] [0: swapper/0: 1] Change UART to AP
[ 2.217489] [0: swapper/0: 1] Change UART to AP
[ 2.229802] [0: swapper/0: 1] switch_handle_notification: action=0 attached_dev=67
[ 2.229802] [0: swapper/0: 1] switch_handle_notification: action=0 attached_dev=67
[ 2.243693] [0: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: +++ ()
[ 2.243693] [0: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: +++ ()
[ 2.259606] [0: swapper/0: 1] mif: ss310ap_init_modemctl_device: +++
[ 2.259606] [0: swapper/0: 1] mif: ss310ap_init_modemctl_device: +++
[ 2.273880] [0: swapper/0: 1] mif: ss310ap_init_modemctl_device: cp_rst_n: Invalied gpio pins
[ 2.273880] [0: swapper/0: 1] mif: ss310ap_init_modemctl_device: cp_rst_n: Invalied gpio pins
[ 2.290035] [0: swapper/0: 1] mif: ss310ap_init_modemctl_device: Check Qch clock node...
[ 2.290035] [0: swapper/0: 1] mif: ss310ap_init_modemctl_device: Check Qch clock node...
[ 2.308180] [0: swapper/0: 1] mif: ss310ap_init_modemctl_device: ---
[ 2.308180] [0: swapper/0: 1] mif: ss310ap_init_modemctl_device: ---
[ 2.324119] [0: swapper/0: 1] mif: shmem_create_link_device: +++
[ 2.324119] [0: swapper/0: 1] mif: shmem_create_link_device: +++
[ 2.337979] [0: swapper/0: 1] mif: shmem_create_link_device: MODEM:ss325ap LINK:shmem
[ 2.337979] [0: swapper/0: 1] mif: shmem_create_link_device: MODEM:ss325ap LINK:shmem
[ 2.353434] [0: swapper/0: 1] mif: shmem_create_link_device: shmem<->ss325ap: LINK_ATTR_DPRAM_MAGIC
[ 2.353434] [0: swapper/0: 1] mif: shmem_create_link_device: shmem<->ss325ap: LINK_ATTR_DPRAM_MAGIC
[ 2.374684] [0: swapper/0: 1] mif: shmem_create_link_device: boot_base=0000000000000000, boot_size=117440512
[ 2.374684] [0: swapper/0: 1] mif: shmem_create_link_device: boot_base=0000000000000000, boot_size=117440512
[ 2.392254] [0: swapper/0: 1] mif: shmem_create_link_device: ipc_base=0000000000000000, ipc_size=4194304
[ 2.392254] [0: swapper/0: 1] mif: shmem_create_link_device: ipc_base=0000000000000000, ipc_size=4194304
[ 2.413781] [0: swapper/0: 1] mif: shmem_create_link_device: packet log device create fail
[ 2.413781] [0: swapper/0: 1] mif: shmem_create_link_device: packet log device create fail
[ 2.432220] [0: swapper/0: 1] mif: shmem_create_link_device: ---
[ 2.432220] [0: swapper/0: 1] mif: shmem_create_link_device: ---
[ 2.447984] [0: swapper/0: 1] mif: modem_probe: ss325ap: shmem link created
[ 2.447984] [0: swapper/0: 1] mif: modem_probe: ss325ap: shmem link created
[ 2.467593] [1: swapper/0: 1] mif: create_io_device: BOOT device = umts_boot0
[ 2.467593] [1: swapper/0: 1] mif: create_io_device: BOOT device = umts_boot0
[ 2.478381] [1: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: ---
[ 2.478381] [1: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: ---
[ 2.493545] [1: swapper/0: 1] gif: gnss_probe: gnss_pdata: +++
[ 2.493545] [1: swapper/0: 1] gif: gnss_probe: gnss_pdata: +++
[ 2.506921] [1: swapper/0: 1] gif: create_gnssctl_device: Found Qch clk!
[ 2.506921] [1: swapper/0: 1] gif: create_gnssctl_device: Found Qch clk!
[ 2.520883] [1: swapper/0: 1] gif: init_gnssctl_device: [GNSS IF] Initializing GNSS Control
[ 2.520883] [1: swapper/0: 1] gif: init_gnssctl_device: [GNSS IF] Initializing GNSS Control
[ 2.537555] [1: swapper/0: 1] gif: init_gnssctl_device: Using simple lock sequence!!!
[ 2.537555] [1: swapper/0: 1] gif: init_gnssctl_device: Using simple lock sequence!!!
[ 2.555145] [1: swapper/0: 1] gif: init_gnssctl_device: Initializing shared memory for GNSS.
[ 2.555145] [1: swapper/0: 1] gif: init_gnssctl_device: Initializing shared memory for GNSS.
[ 2.572936] [1: swapper/0: 1] gif: set_shdmem_size: [GNSS]Set shared mem size: 4194304B
[ 2.572936] [1: swapper/0: 1] gif: set_shdmem_size: [GNSS]Set shared mem size: 4194304B
[ 2.590901] [1: swapper/0: 1] gif: set_shdmem_base: [GNSS]Set shared mem baseaddr : 0x70000000
[ 2.590901] [1: swapper/0: 1] gif: set_shdmem_base: [GNSS]Set shared mem baseaddr : 0x70000000
[ 2.609077] [1: swapper/0: 1] gif: init_gnssctl_device: ---
[ 2.609077] [1: swapper/0: 1] gif: init_gnssctl_device: ---
[ 2.624713] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: SHMEM: KEPLER
[ 2.624713] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: SHMEM: KEPLER
[ 2.639385] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: GNSS_SHDMEM: gnss phys_addr:0x70000000 virt_addr:0xffffff801c375000 size: 2097152
[ 2.639385] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: GNSS_SHDMEM: gnss phys_addr:0x70000000 virt_addr:0xffffff801c375000 size: 2097152
[ 2.661269] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: GNSS_SHDMEM: phys_addr:0x70200000 virt_addr:0xffffff801c576000 size:2097152
[ 2.661269] [1: swapper/0: 1] gif: gnss_shmem_create_link_device: GNSS_SHDMEM: phys_addr:0x70200000 virt_addr:0xffffff801c576000 size:2097152
[ 2.689075] [1: swapper/0: 1] gif: gnss_probe: KEPLER: GNSS_SHDMEM link created
[ 2.689075] [1: swapper/0: 1] gif: gnss_probe: KEPLER: GNSS_SHDMEM link created
[ 2.710259] [1: swapper/0: 1] gif: gnss_probe: KEPLER: ---
[ 2.710259] [1: swapper/0: 1] gif: gnss_probe: KEPLER: ---
[ 2.725037] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin gpd2-1 already requested by 139b0000.pinctrl; cannot claim for 7-003d
[ 2.725037] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin gpd2-1 already requested by 139b0000.pinctrl; cannot claim for 7-003d
[ 2.743810] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin-121 (7-003d) status -22
[ 2.743810] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin-121 (7-003d) status -22
[ 2.765971] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: could not request pin 121 (gpd2-1) from group gpd2-1 on device samsung-pinctrl
[ 2.765971] [1: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: could not request pin 121 (gpd2-1) from group gpd2-1 on device samsung-pinctrl
[ 2.788747] [1: swapper/0: 1] s2mu004 7-003d: Error applying setting, reverse things back
[ 2.788747] [1: swapper/0: 1] s2mu004 7-003d: Error applying setting, reverse things back
[ 2.812103] [0: swapper/0: 1] [s2mu004 mfd] s2mu004_i2c_probe : 0x38, rev=0x3, ver=0x8
[ 2.812103] [0: swapper/0: 1] [s2mu004 mfd] s2mu004_i2c_probe : 0x38, rev=0x3, ver=0x8
[ 2.828873] [0: swapper/0: 1] s2mu004:s2mu004_irq_init irq=7, irq->gpio=32
[ 2.828873] [0: swapper/0: 1] s2mu004:s2mu004_irq_init irq=7, irq->gpio=32
[ 2.934774] [3: irq/6-sec-nfc: 1150] sec-nfc 5-0027: [NFC] Warning,irq-gpio state is low!
[ 2.934774] [3: irq/6-sec-nfc: 1150] sec-nfc 5-0027: [NFC] Warning,irq-gpio state is low!
[ 3.143992] [0: swapper/0: 1] dwc3 13600000.dwc3: dwc3_otg address space is not supported
[ 3.143992] [0: swapper/0: 1] dwc3 13600000.dwc3: dwc3_otg address space is not supported
[ 3.153557] [0: swapper/0: 1] dwc3 13600000.dwc3: Binding gadget dwc3-gadget
[ 3.153557] [0: swapper/0: 1] dwc3 13600000.dwc3: Binding gadget dwc3-gadget
[ 3.175736] [0: swapper/0: 1] abov-touchkey-ft1804 6-0020: [sec_input] no irq_flag
[ 3.175736] [0: swapper/0: 1] abov-touchkey-ft1804 6-0020: [sec_input] no irq_flag
[ 3.186112] [0: swapper/0: 1] abov-touchkey-ft1804 6-0020: [sec_input] abov_tk_probe done
[ 3.186112] [0: swapper/0: 1] abov-touchkey-ft1804 6-0020: [sec_input] abov_tk_probe done
[ 3.525249] [3:irq/5-bt532_ts_: 1205] bt532_ts_device 9-0020: [sec_input] Invalid interrupt
[ 3.525249] [3:irq/5-bt532_ts_: 1205] bt532_ts_device 9-0020: [sec_input] Invalid interrupt
[ 3.540880] [2: swapper/0: 1] sec-thermistor sec_thermistor@0: sec_therm_probe: fail to get iio channel
[ 3.540880] [2: swapper/0: 1] sec-thermistor sec_thermistor@0: sec_therm_probe: fail to get iio channel
[ 3.658380] [0: swapper/0: 1] s2mu004_fuelgauge_parse_dt fg_log_disabled -22
[ 3.658380] [0: swapper/0: 1] s2mu004_fuelgauge_parse_dt fg_log_disabled -22
[ 3.669803] [0: swapper/0: 1] s2mu004-fuelgauge 10-003b: s2mu004_get_rawsoc: OTP 4E(00) 4F(00) current 4E(f6) 4F(1f)
[ 3.669803] [0: swapper/0: 1] s2mu004-fuelgauge 10-003b: s2mu004_get_rawsoc: OTP 4E(00) 4F(00) current 4E(f6) 4F(1f)
[ 3.755219] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 3.755219] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 3.772358] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (s2mu004-charger)
[ 3.772358] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (s2mu004-charger)
[ 3.780731] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 3.780731] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 3.796853] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 3.796853] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery)
[ 3.812294] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to set psy (s2mu004-charger)
[ 3.812294] [0: swapper/0: 1] s2mu004_get_rawsoc: Fail to set psy (s2mu004-charger)
[ 3.828428] [0: swapper/0: 1] s2mu004_init_regs: s2mu004 fuelgauge initialize
[ 3.828428] [0: swapper/0: 1] s2mu004_init_regs: s2mu004 fuelgauge initialize
[ 3.854327] [0: swapper/0: 1] s2mu004_charger_parse_dt np NULL(sec-multi-charger)
[ 3.854327] [0: swapper/0: 1] s2mu004_charger_parse_dt np NULL(sec-multi-charger)
[ 3.922301] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_apb_probe
[ 3.922301] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_apb_probe
[ 3.932737] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_probe
[ 3.932737] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_probe
[ 3.945937] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_resume (count = 1)
[ 3.945937] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_resume (count = 1)
[ 3.962946] [1: swapper/0: 1] audmixer 14880000.s1402x: lpass_get_sync: audiomixer (use:1)
[ 3.962946] [1: swapper/0: 1] audmixer 14880000.s1402x: lpass_get_sync: audiomixer (use:1)
[ 4.014340] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) post_update_fw
[ 4.014340] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) post_update_fw
[ 4.021915] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_suspend (count = 1)
[ 4.021915] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_suspend (count = 1)
[ 4.039146] [1: swapper/0: 1] audmixer 14880000.s1402x: lpass_put_sync: audiomixer (use:0)
[ 4.039146] [1: swapper/0: 1] audmixer 14880000.s1402x: lpass_put_sync: audiomixer (use:0)
[ 4.057970] [1: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_codec_probe
[ 4.057970] [1: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_codec_probe
[ 4.074236] [0: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_runtime_resume
[ 4.074236] [0: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_runtime_resume
[ 4.089068] [0: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_enable
[ 4.089068] [0: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_enable
[ 4.103625] [0: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_resume (count = 2)
[ 4.103625] [0: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_resume (count = 2)
[ 4.120052] [0: swapper/0: 1] audmixer 14880000.s1402x: lpass_get_sync: audiomixer (use:1)
[ 4.120052] [0: swapper/0: 1] audmixer 14880000.s1402x: lpass_get_sync: audiomixer (use:1)
[ 4.200541] [0: swapper/0: 1] cod3026x 0-a004: cod3026x_save_otp_registers called
[ 4.200541] [0: swapper/0: 1] cod3026x 0-a004: cod3026x_save_otp_registers called
[ 4.210538] [0: swapper/0: 1] cod3026x 0-a004: Bias voltage values: bias1 = 1, bias2= 1, ldo = 3
[ 4.210538] [0: swapper/0: 1] cod3026x 0-a004: Bias voltage values: bias1 = 1, bias2= 1, ldo = 3
[ 4.226530] [0: swapper/0: 1] cod3026x 0-a004: Using GPADC for jack/button detection
[ 4.226530] [0: swapper/0: 1] cod3026x 0-a004: Using GPADC for jack/button detection
[ 4.244681] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(226), low(0), high(399)
[ 4.244681] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(226), low(0), high(399)
[ 4.262354] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(582), low(400), high(470)
[ 4.262354] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(582), low(400), high(470)
[ 4.281090] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(115), low(471), high(655)
[ 4.281090] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(115), low(471), high(655)
[ 4.300009] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(114), low(656), high(1100)
[ 4.300009] [0: swapper/0: 1] cod3026x 0-a004: [DEBUG]: buttons: code(114), low(656), high(1100)
[ 4.319023] [0: swapper/0: 1] cod3026x 0-a004: cod3026x_post_fw_update_failure called, setting defaults
[ 4.319023] [0: swapper/0: 1] cod3026x 0-a004: cod3026x_post_fw_update_failure called, setting defaults
[ 4.341221] [1: swapper/0: 1] cod3026x 0-a004: [DEBUG]cod3026x_codec_probe : int_gpio 13
[ 4.341221] [1: swapper/0: 1] cod3026x 0-a004: [DEBUG]cod3026x_codec_probe : int_gpio 13
[ 4.358030] [1: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_runtime_suspend
[ 4.358030] [1: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_runtime_suspend
[ 4.374247] [1: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_disable
[ 4.374247] [1: swapper/0: 1] cod3026x 0-a004: (*) cod3026x_disable
[ 4.388998] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_suspend (count = 2)
[ 4.388998] [1: swapper/0: 1] audmixer 14880000.s1402x: (*) audmixer_runtime_suspend (count = 2)
[ 4.405620] [1: swapper/0: 1] audmixer 14880000.s1402x: lpass_put_sync: audiomixer (use:0)
[ 4.405620] [1: swapper/0: 1] audmixer 14880000.s1402x: lpass_put_sync: audiomixer (use:0)
[ 4.424145] [1: swapper/0: 1] cod3026x 0-a004: Unable to configure codec gpio as idle
[ 4.424145] [1: swapper/0: 1] cod3026x 0-a004: Unable to configure codec gpio as idle
[ 4.444165] [3: swapper/0: 1] audmixer 14880000.s1402x: audmixer_init called
[ 4.444165] [3: swapper/0: 1] audmixer 14880000.s1402x: audmixer_init called
[ 4.458233] [3: swapper/0: 1] universal7880-audio sound: universal7880_late_probe called
[ 4.458233] [3: swapper/0: 1] universal7880-audio sound: universal7880_late_probe called
[ 4.476866] [1: swapper/0: 1] universal7880-audio sound: BIAS: MIC1(1), MIC2(1), MIC3(2), LINEIN(0)
[ 4.476866] [1: swapper/0: 1] universal7880-audio sound: BIAS: MIC1(1), MIC2(1), MIC3(2), LINEIN(0)
[ 4.493500] [1: swapper/0: 1] universal7880-audio sound: universal7880_request_ext_mic_bias_en_gpio called
[ 4.493500] [1: swapper/0: 1] universal7880-audio sound: universal7880_request_ext_mic_bias_en_gpio called
[ 4.543054] [0: swapper/0: 1] [muic] of_s2mu004_muic_dt : could not find muic gpio
[ 4.564442] [0: swapper/0: 1] [muic] s2mu004_muic_probe rustproof is enabled
[ 4.730310] [0: swapper/0: 1] usbpd-s2mu004 10-003c: s2mu004_usbpd_init_configure : Initial abnormal state to LPM Mode
[ 4.834783] [3:irq/7-s2mu004-i: 1144] switch_handle_notification: action=0 attached_dev=67
[ 4.836782] [3:irq/7-s2mu004-i: 1144] switch_handle_notification: action=1 attached_dev=1
[ 4.901243] [0: swapper/0: 1] ccic_notifier_init already registered
[ 4.901635] [0: swapper/0: 1] typec_init : success typec_register_port port=0000000000000000
[ 4.903877] [0: swapper/0: 1] usbpd-s2mu004 10-003c: s2mu004_check_port_detect, PLUG Error
[ 4.961260] [0: swapper/0: 1] s2mu004_set_vconn_source, not support vconn source
[ 4.968082] [3: kworker/u16:1: 50] exynos-tmu 10130000.tmuctrl_CPUCL1: [ECT]hotplug_threshold : 96
[ 4.969745] [0: swapper/0: 1] otg_wakelock_init: No USB transceiver found
[ 4.971559] [1: swapper/0: 1] conn_gadget_function_init(#) call conn_gadget_setup
[ 4.972969] [1: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt: usb30_redriver_en: Invalied gpio pins
[ 4.982853] [1: swapper/0: 1] usb_notify: register_usblog_proc already registered
[ 4.991156] [1: swapper/0: 1] manager_notifier_init already registered
[ 4.999403] [1:irq/14-s2mu004-: 1550] s2mu004_set_vconn_source, not support vconn source
[ 5.009468] [0: swapper/0: 1] exynos_get_idle_ip_list: Cannot find fix-idle-ip property
[ 5.019624] [0: swapper/0: 1] s2mu004-fuelgauge 10-003b: s2mu004_get_rawsoc: OTP 4E(f6) 4F(1f) current 4E(f6) 4F(1f)
[ 5.107479] [1:irq/14-s2mu004-: 1550] usbpd-s2mu004 10-003c: s2mu004_usbpd_rp_check, cc Rp check success (26)
[ 5.110146] [0: swapper/0: 1] sec_battery_probe: Fail to set psy ((null))
[ 5.110388] [0: swapper/0: 1] sec_battery_probe: Fail to s2mu004-charger set (41=>-22)
[ 5.112316] [0: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin gpf4-2 already requested by 139b0000.pinctrl; cannot claim for spi2.0
[ 5.124576] [0: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin-163 (spi2.0) status -22
[ 5.133622] [0: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: could not request pin 163 (gpf4-2) from group gpf4-2 on device samsung-pinctrl
[ 5.147254] [0: swapper/0: 1] ssp spi2.0: Error applying setting, reverse things back
[ 5.156085] [0: swapper/0: 1] [SSP] ssp_parse_dt( 440): project is default
[ 5.164349] [0: swapper/0: 1] [SSP] initialize_variable( 74): initialize_variable.
[ 5.172883] [0: swapper/0: 1] [SSP] init accelerometer_sensor iio dev, type = 1
[ 5.180865] [0: swapper/0: 1] [SSP] init geomagnetic_sensor iio dev, type = 2
[ 5.188741] [3: swapper/0: 1] [SSP] init gyro_sensor iio dev, type = 4
[ 5.196064] [3: swapper/0: 1] [SSP] init light_sensor iio dev, type = 5
[ 5.203399] [3: swapper/0: 1] [SSP] init pressure_sensor iio dev, type = 6
[ 5.211099] [3: swapper/0: 1] [SSP] init proximity_sensor iio dev, type = 8
[ 5.218814] [3: swapper/0: 1] [SSP] init uncal_geomagnetic_sensor iio dev, type = 14
[ 5.227290] [3: swapper/0: 1] [SSP] init uncal_gyro_sensor iio dev, type = 16
[ 5.235204] [3: swapper/0: 1] [SSP] init sig_motion_sensor iio dev, type = 17
[ 5.243090] [3: swapper/0: 1] [SSP] init step_det_sensor iio dev, type = 18
[ 5.250819] [3: swapper/0: 1] [SSP] init step_cnt_sensor iio dev, type = 19
[ 5.258540] [3: swapper/0: 1] [SSP] init geomagnetic_rotation_vector_sensor iio dev, type = 20
[ 5.267922] [3: swapper/0: 1] [SSP] init tilt_detector iio dev, type = 22
[ 5.275463] [3: swapper/0: 1] [SSP] init pickup_gesture iio dev, type = 25
[ 5.283031] [3: swapper/0: 1] [SSP] init geomagnetic_power iio dev, type = 30
[ 5.290944] [3: swapper/0: 1] [SSP] init interrupt_gyro_sensor iio dev, type = 31
[ 5.299187] [3: swapper/0: 1] [SSP] init scontext_iio iio dev, type = 32
[ 5.306650] [3: swapper/0: 1] [SSP] init light_cct_sensor iio dev, type = 34
[ 5.377292] [1: kworker/u16:0: 6] s2mu004_set_topoff_current: Fail to s2mu004-fuelgauge set (21=>-22)
[ 5.392452] [1: kworker/u16:0: 6] sec-battery battery: sec_bat_get_temperature_by_adc: Temp(274), Temp-ADC(1926)
[ 5.393169] [1: kworker/u16:0: 6] sec-battery battery: sec_bat_get_temperature_by_adc: Temp(274), Temp-ADC(1926)
[ 5.393887] [1: kworker/u16:0: 6] sec-battery battery: sec_bat_get_temperature_by_adc: Temp(312), Temp-ADC(1744)
[ 5.403796] [1: kworker/u16:0: 6] s2mu004-fuelgauge 10-003b: s2mu004_get_rawsoc: OTP 4E(f6) 4F(1f) current 4E(f6) 4F(1f)
[ 5.830692] [2: swapper/0: 1] [SSP] initialize_mcu( 134): is_shutdown = 0
[ 5.884023] [2: swapper/0: 1] samsung-lpass 148f0000.lpass: lpass_disable (count = 1)
[ 5.899886] [0: swapper/0: 1] wlan_platform_sdio_enumerate: notify_func=ffffffc0005668f8, mmc_host_dev=ffffffc002644018, device_present=1
[ 5.900037] [0: swapper/0: 1] card inserted
[ 5.904391] [3: kworker/3:1: 782] Running do_deferred_initcalls()
/init: line 234: can't create /proc/sys/kernel/printk_devkmsg: nonexistent directory
[ 6.214604] [6: init_2nd.sh: 1] android_usb: already disabled
[ 6.455759] [0: sh: 2523] Call trace:
[ 6.604672] [0: sh: 2523] Call trace:
/init_2nd.sh: line 89: can't create /proc/sys/kernel/printk_devkmsg: nonexistent directory
OpenRC 0.62.6 is starting up Linux 3.18.140 (aarch64)
* /proc is already mounted
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
zram swap: activating with size: 1414 MB
* Caching service dependencies ... [ ok ]
* Clock skew detected with 'init.d'
* Adjusting mtime of '/run/openrc/deptree' to Sun Nov 9 17:14:15 2025
* WARNING: clock skew detected!
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/shm ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting config filesystem ... [ ok ]
* Mounting fuse control filesystem ... [ ok ]
* Mounting SELinux filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting udev ... [ ok ]
* Generating a rule to create a /dev/root symlink ... [ ok ]
* Populating /dev with existing devices through uevents ... [ ok ]
* Waiting for uevents to be processed ...[ 9.953477] [6: udevd: 3060] Call trace:
[ !! ]
* ERROR: udev-settle failed to start
* WARNING: clock skew detected!
* Waiting for uevents to be processed ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems ... [ ok ]
* Remounting filesystems ...mount: /: can't find UUID=a326a7a9-e448-4484-a862-e668ec58e82b.
[ ok ]
* Mounting local filesystems ...mount: /boot: can't find UUID=89dacc03-ceee-4ca6-a97f-7b6432d993d7.
* Some local filesystem failed to mount
[ !! ]
* Configuring kernel parameters ...sysctl: error: 'net.ipv4.tcp_syncookies' is an unknown key
sysctl: error: 'kernel.unprivileged_bpf_disabled' is an unknown key
sysctl: error: 'net.ipv4.tcp_syncookies' is an unknown key
sysctl: error: 'kernel.unprivileged_bpf_disabled' is an unknown key
[ ok ]
* Mounting /tmp as tmpfs ... [ ok ]
* Creating user login records ... [ ok ]
* Setting hostname ... [ ok ]
* Starting logbookd ...Cannot restore /var/log/logbookd.db
[ ok ]
* Starting msm-fb-refresher ... [ ok ]
* WARNING: clock skew detected!
* Activating swap file ...Configured swap file size is 0, skipping creation.
[ ok ]
* /run/dbus: creating directory
* /run/dbus: correcting owner
* Starting System Message Bus ... [ ok ]
* Your kernel lacks nftables support, please load
* appropriate modules and try again.
* ERROR: nftables failed to start
* Starting haveged ... [ ok ]
* /var/run/wpa_supplicant: creating directory
* Starting WPA Supplicant ... [ ok ]
* Starting networkmanager ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting kill-pbsplash ... [ ok ]
* Restoring rfkill configuration ... [ ok ]
* Starting sleep-inhibitor ... [ ok ]
ssh-keygen: generating new host keys: RSA ECDSA ED25519
* Starting sshd ... [ ok ]
* Activating swap devices ... [ ok ]
zram swap: activating with size: 1414 MB
* Loading zram module...
modprobe: FATAL: Module zram not found in directory /lib/modules/3.18.140
[ ok ]
* Swap->zram0
zram-init:
cannot create /dev/zram0: /sys/class/zram-control missing
[ !! ]
* Starting local ... [ ok ]