Reduce the PFC tables by ifdeffing out pinmux settings which are
unlikely to be used by U-Boot. This helps reduce the size of the
bootloader in the 10 kiB range. This includes conditional build
of these PFC additions:
- CANFD
- DU
- INTC-EX
- MSIOF
- PWM
- VIN
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
(cherry picked from commit a046f58f33)
Reduce the PFC tables by ifdeffing out pinmux settings which are
unlikely to be used by U-Boot. This helps reduce the size of the
bootloader in the 10 kiB range. This includes conditional build
of these PFC additions:
- Audio
- CAN/CANFD
- DU
- INTC-EX
- MSIOF
- PWM
- SSI
- VIN
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
(cherry picked from commit d020179cf0)
Reduce the PFC tables by ifdeffing out pinmux settings which are
unlikely to be used by U-Boot. This helps reduce the size of the
bootloader in the 10 kiB range. This includes conditional build
of these PFC additions:
- Audio
- CAN/CANFD
- DU
- INTC-EX
- MSIOF
- PWM
- SSI
- VIN
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
(cherry picked from commit 0edacf1a41)
Reduce the PFC tables by ifdeffing out pinmux settings which are
unlikely to be used by U-Boot. This helps reduce the size of the
bootloader in the 10 kiB range. This includes conditional build
of these PFC additions:
- Audio
- CAN/CANFD
- DU
- INTC-EX
- MSIOF
- PWM
- SSI
- VIN
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
(cherry picked from commit 2890251ead)
Reduce the PFC tables by ifdeffing out pinmux settings which are
unlikely to be used by U-Boot. This helps reduce the size of the
bootloader in the 10 kiB range. This includes conditional build
of these PFC additions:
- Audio
- CAN
- DU
- INTC
- MSIOF
- PWM
- SSI
- VIN
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
(cherry picked from commit 7f19150405)
Reduce the PFC tables by ifdeffing out pinmux settings which are
unlikely to be used by U-Boot. This helps reduce the size of the
bootloader in the 10 kiB range. This includes conditional build
of these PFC additions:
- CAN
- DU
- INTC
- MSIOF
- VIN
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
(cherry picked from commit 7db1d1fadf)
Reduce the PFC tables by ifdeffing out pinmux settings which are
unlikely to be used by U-Boot. This helps reduce the size of the
bootloader in the 10 kiB range. This includes conditional build
of these PFC additions:
- Audio
- CAN
- DU
- INTC
- MSIOF
- PWM
- SSI
- VIN
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
(cherry picked from commit 6671e9aebd)
Reduce the PFC tables by ifdeffing out pinmux settings which are
unlikely to be used by U-Boot. This helps reduce the size of the
bootloader in the 10 kiB range. This includes conditional build
of these PFC additions:
- Audio
- CAN
- DU
- INTC
- MSIOF
- PWM
- SSI
- VIN
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
(cherry picked from commit 2f3bd7ca26)
By default the pin multiplexing tables used by U-Boot are reduced
to keep the size of the bootloader low. This option allows build of
full pin multiplexing tables the same way they are included in the
Linux kernel. This includes pin multiplexing options for Audio, CAN,
CANFD, DU, INTC, INTC-EX, MSIOF, PWM, SSI, for which there is no
U-Boot driver. This option is disabled by default.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
(cherry picked from commit e6e3d70632)
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/23987
- imx8m: Remove global ddrphy_trained_csr as it is a per board
configuration.
- Add DM_FLAG_ACTIVE_DMA flag for FEC network driver to avoid potential
kernel crash.
- Miscellaneous improvements for i.MX8M Venice Gateworks platforms.
(cherry picked from commit 68736cf8e3)
Drop global ddrphy_trained_csr which maybe different with per board
ddrphy_trained_csr. DDR TOOL generates ddrphy_trained_csr for each
board, using the global ddrphy_trained_csr has risk that values may
be not up to date.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 6016960ceb)
When FEC network card works as the prime one in u-boot, and is in
active status, kernel might crash during booting up stage, especially
working with grub. Because the DMA of FEC is still in active status, and
copy data into memory if there is network data received. In this case, if
kernel allocated a part of memory that has overlay with the memory
used by DMA, kernel memory may be destroyed and cause kernel crashes.
Because before kernel boots up really, u-boot dm_remove_devices_flags()
can call the remove callback of FEC driver with DM_FLAG_ACTIVE_DMA
flag. In fecmxc_remove(), phy power is disabled, so there is no data
received. In this way, it makes sure that there is no DMA action, so
that avoid kernel crashing occurs.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
(cherry picked from commit 2f74cac8c3)
With an IMX8MP based SOM the SPI RST is gpio4_9 instead of gpio1_11.
Fix this.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
(cherry picked from commit 7f02219eb6)
define a suitable default address for CONFIG_SPL_LOAD_FIT_ADDRESS
to make it easier on folks enabling HABv4.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
(cherry picked from commit b0b8f8586f)
Add support for Gateworks System Controller pre-scaled ADC input.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
(cherry picked from commit 87bdb4e8a7)
The mxc_get_clock function is around for compatibility with older
drivers that are not clock aware. In this case asking for the clk for
MXC_CSPI_CLK does not take into account there are multiple SPI busses on
modern IMX SoC's and it will return the clock for the first bus which
may not be used or configured.
In the case you are not using the first bus you will not get the proper
clock. Fix this by obtaining the clock rate from the bus clock.
This resolves an invalid SPI clock frequency configuration for SPI2 on a
board where SPI1 is not used.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
(cherry picked from commit f331967b3d)
First, thanks to Simon Glass and also Linaro, we now have access to a
few fast arm64 host machines in our Gitlab instance, to use as CI
runners. This series finishes the work that I pushed earlier and Simon
had started that enables arm64 hosts to be used for most things now.
The first notable change, especially if you use this on your own Gitlab
instance is that "DEFAULT_TAG" is now unused and we instead have:
- DEFAULT_ALL_TAG:
- DEFAULT_ARM64_TAG:
- DEFAULT_AMD64_TAG:
- DEFAULT_FAST_AMD64_TAG:
This lets us say that some jobs can be run on all runners, because they
are small enough that anything we'd connect to CI is fast enough and it
also does not depend on the underlying host architecture. Next we have
tags for any arm64 host, or any amd64 host. Finally, we have a tag for
fast amd64 hosts. What these last three are for is that we have a few
jobs that need to run on amd64 hosts and so we have to restrict them
there, but we also have now reworked the world build jobs to build
(almost) everything in a single job and on the fast amd64 machines this
is still as quick as the old way was, in practice.
To reach this point, we say that the Xtensa jobs can only run on amd64
hosts. Our targets only work with the binary-only toolchain and so this
is a reasonable limit and we exclude them from the world build jobs. We
also need to deal with ensuring the right toolchain is used regardless
what the host architecture is and that we don't use the host toolchain
by accident. Finally, because some of these changes needed to be worked
out in the linter, fix some of the general warnings that notes as well.
(cherry picked from commit 5947cd76ac)
Dropped tag changes:
Signed-off-by: Simon Glass <simon.glass@canonical.com>
First, try and be slightly clearer about what "buildx" is with respect
to the docker build process.
Second, now that we build the container for both amd64 and arm64, we
should document how to make a docker "builder" that has multiple nodes.
With this one node should be amd64 and one node arm64, and with
reasonably fast arm64 hardware this will be much quicker than using
QEMU.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
(cherry picked from commit e82922ae11)
We should always look in our downloaded toolchains first and then for
host-provided toolchains.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
(cherry picked from commit 9a87362962)
In the test.py stage of the build we mark the pytest results as
artifacts to save, so that they can be used for reports. This however
leads to all of the artifacts being downloaded (and then not used) in
later stages. Optimize this out by using an empty list of dependencies
here (which is the keyword for which artifacts are needed).
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
(cherry picked from commit d3bb245855)
The xtensa architecture is interesting in that the platforms we support
are only valid on the binary-only toolchains as the DC233C instruction
set requires those toolchains (and not the FSF instruction set). Only
install the binary toolchain on amd64 hosts and only run the tests on
them as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
(cherry picked from commit 12d7be498a)
For new PowerPC developments, it will be useful to borrow devicetrees
from Linux. This patch makes it possible.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
(cherry picked from commit 337bfdce5a)
In generic_phy_get_bulk(), if 'phys' property is absent in
the device node then it is not an error condition.
Change print message verbosity to debug to avoid spamming
console in such cases.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
(cherry picked from commit 6f99dc241d)
The current value of CONFIG_FASTBOOT_BUF_ADDR is incorrect for hardware
with 512MB and 1GB of RAM. The RAM address ranges for these devices are:
- 512MB:
- Start: 0x80000000
- End: 0xA0000000
- 1GB:
- Start: 0x80000000
- End: 0xC0000000
The current buffer address makes fastboot downloads work only on
hardware with 2GB of RAM.
To fix this issue:
1. Lower CONFIG_FASTBOOT_BUF_ADDR to 0x88200000. This makes the buffer
to be equal ot CONFIG_SYS_LOAD_ADDR, which is a safe address to
download files using fastboot.
2. Reduce the size of the download buffer to 128MB, avoiding overlaps
with RAMDISK_ADDR_R. This is a good enough value for individual
downloads.
These changes make fastboot downloads work with 512MB and 1GB devices.
Fixes: defe30a78b ("verdin-am62: add DFU, USB and UUU fastboot support")
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
(cherry picked from commit 9c5399a73d)
Support of legacy 64-bit entry point was already present when booting a bzimage
with 'zboot' but not supported with 'bootm' when the x86_64 Linux kernel is
embedded in a FIT image.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
(cherry picked from commit 37f0c32ca2)
Evgeny Bachinin <EABachinin@salutedevices.com> says:
This patch-set repairs ability to use sandbox with CONFIG_OF_EMBED=y.
For now, to use OF_EMBED, the following must be done
1) sandbox64_defconfig should have:
```
-CONFIG_OF_LIVE=y
+CONFIG_OF_EMBED=y
```
2) On sandbox when CONFIG_OF_EMBED=y, the u-boot process can't start
due to:
```
Bloblist at b000 not found (err=-2)
initcall failed at call 000000000011829c (err=-2: No such file or \
directory)
### ERROR ### Please RESET the board ###
```
So, it is natural desire to disable CONFIG_BLOBLIST just to test
sandbox with OF_EMBED=y (disable it one way or another):
```
config SANDBOX
- select BLOBLIST
+ select BLOBLIST if SOME_NON_EXISTING_OPTION
```
3) As a result, having such changes (CONFIG_OF_EMBED=y &&
CONFIG_BLOBLIST=n) leads to the link & run-time errors, being fixed
by this patch series.
Link: https://lore.kernel.org/r/20241202-sandbox_repair_of_embed-v1-0-05aff4b0ccf7@salutedevices.com
[trini: The final patch is dropped as no longer relevant with Simon's
rework to that function which is now applied.]
(cherry picked from commit 511b8dea97)
This series is from Simon Glass <sjg@chromium.org>.
It first corrects the test for checking if a bloblist could have come
from TPL and so we check for a device tree, and then changes the
argument order for board_fdt_blob_setup() to be more inline with our
usual argument ordering.
Link: https://lore.kernel.org/r/20241102174944.412088-1-sjg@chromium.org
(cherry picked from commit b6e1ac89dc)
Having CONFIG_OF_EMBED=y && CONFIG_BLOBLIST=n leads to the link
error:
```
ld: /tmp/ccRVty.ltrans40.ltrans.o: in function `lib_test_is_enabled':
test/lib/kconfig.c:24: undefined reference to \
`invalid_use_of_IF_ENABLED_INT'
ld: test/lib/kconfig.c:26: undefined reference to \
`invalid_use_of_CONFIG_IF_ENABLED_INT'
```
Fixes: 29784d62ed ("test: Add some tests for kconfig.h")
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
(cherry picked from commit 844f87366e)
Having CONFIG_OF_EMBED=y && CONFIG_BLOBLIST=n leads to the link
error:
```
ld: /tmp/ccwtRVty.ltrans0.ltrans.o: in function `state_uninit':
arch/sandbox/cpu/state.c:508: undefined reference to `bloblist_finish'
```
Fixes: 1c52fcca72 ("sandbox: Write out bloblist when exiting")
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
(cherry picked from commit e5178be686)
This returns a devicetree and updates a parameter with an error code.
Swap it, since this fits better with the way U-Boot normally works. It
also (more easily) allows leaving the existing pointer unchanged.
No yaks were harmed in this change, but there is a very small code-size
reduction.
For sifive, the OF_BOARD option must be set for the function to be
called, so there is no point in checking it again. Also OF_SEPARATE is
defined always.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
[trini: Update total_compute]
Signed-off-by: Tom Rini <trini@konsulko.com>
(cherry picked from commit fc37a73e66)
Signed-off-by: Simon Glass <simon.glass@canonical.com>
The FIT name in RISC-V Falcon mode should be different from that in
normal boot mode; it is called linux.itb. If the setting is missing
in common/spl, the normal boot file name will be used.
Signed-off-by: Randolph <randolph@andestech.com>
(cherry picked from commit e59241f8b1)
Enable driver for DesignWare MSHC. TH1520 supports all
speed modes up to HS400ES and UHS SDR105.
Also enable ADMA and mmc command.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
(cherry picked from commit e10cf618e3)
Add SDHCI and EMMC controlles nodes on TH-1520 SoC. And enable them for
Lichee module 4A.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
(cherry picked from commit dced3ec324)
There are difference between upstream DT and the old DT
in terms of reg base, reset gpio and syscon. Make the driver
compatible with upstream DT.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: E Shattow <lucent@gmail.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
(cherry picked from commit 0b7bf26d06)
