The fsuuid command is useful for testing filesystem UUID support.
Enable it by default for sandbox builds.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
The fscrypt_match_name stub macro always returns 1, causing every
directory entry to match regardless of name. Also d_splice_alias is
a no-op that returns NULL, so the inode found by ext4_lookup is
never associated with the dentry.
Fix fscrypt_match_name to properly compare name lengths and contents.
Fix d_splice_alias, d_instantiate and d_instantiate_new to set
d->d_inode.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Convert the local_irq_* macros to static inline functions to avoid
"unused variable 'flags'" warnings when building with the atomic
operations from asm-generic/atomic.h.
Co-developed-by: Claude Opus 4.5 <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
The comment about atomic_t being expected from the including file is
outdated. Include asm-generic/atomic.h directly to provide the atomic_t
type definition.
Co-developed-by: Claude Opus 4.5 <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
The previous fix using -T4 is insufficient because queue-based job
distribution does not guarantee one board per thread. Even with 4
threads and 4 boards, a faster thread can finish its board and grab
another from the queue, causing .config to leak between boards in
the same thread's work directory.
Fix by using -P (per-board-out-dir) which gives each board its own
output directory, completely preventing .config leakage regardless
of thread scheduling.
Fixes: 17618b5975 ("buildman: Fix flaky test_kconfig_change test")
Co-developed-by: Claude Opus 4.5 <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Test declarations should immediately follow the closing brace of the
function they declare, with no blank line in between.
Co-developed-by: Claude Opus 4.5 <noreply@anthropic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
QEMU comes with its own OpenSBI. For running RISC-V virtual machine
using one of qemu-riscv64_smode_defconfig or
qemu-riscv64_smode_acpi_defconfig is the natural choice.
Add the riscv64 smode configurations to the test scope.
Series-to: concept
Cover-letter:
CI: Tidy up riscv targets
There are some smode options for the QEMU builds, along with some
associated hooks.
This eries pulls these in from upstream, since the previous attempt has
broken qemu-riscv64
END
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
(cherry picked from 703efbb1a5)
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Provide test environments for running
qemu-riscv64_smode and qemu-riscv64_smode_acpi.
These use the OpenSBI implementation provided by QEMU and
pass main u-boot as -kernel parameter.
ACPI is enabled for both boards. We still expect the boards to use
QEMU's device-tree as control device-tree.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
(cherry picked from d94ebdd2c823ce8776723184cda960dcd2954711)
Remove the rva23s64 CPU since we don't have that in our QEMU:
Signed-off-by: Simon Glass <simon.glass@canonical.com>
There is in fact a 'msg' member for Commit, set up by the
Patchstream._close_commit() function. Declare it in the docs and set it
to empty when the Commit is created.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add a --quiet-hooks option to suppress display of hook commands to
stdout while still logging them to the HTML log file. This reduces
console noise during test runs.
Cover-letter:
test: pytest and hook improvements
This series includes several improvements to the pytest infrastructure
and test hook configurations:
- Fix the timing check in conftest to properly check if timing is enabled
- Add a --quiet-hooks option to suppress hook command display
- Add and update ellesmere hook config files for various QEMU boards
- Update qemu-riscv64 config for S-mode with OpenSBI
END
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add configuration files for qemu-riscv32_smode, qemu-riscv64_smode,
qemu-riscv64_smode_acpi, qemu_arm64_acpi, and qemu_arm64_lwip boards.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Update the qemu-riscv64 hook config to use OpenSBI as the BIOS and load
U-Boot as the kernel, which is required for S-mode operation.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add configuration files for qemu-arm-sbsa, qemu-ppce500, and
qemu-xtensa-dc233c boards.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
The check uses hasattr() to see if the 'timing' attribute exists, but
does not check if it is actually enabled. Fix this by checking the
attribute value instead.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
If neither CONFIG_BLOBLIST_FIXED NOR CONFIG_BLOBLIST_ALLOC is set,
currently CONFIG_BLOBLIST_SIZE_RELOC defaults to 0 except if
* CONFIG_ARM=y && CONFIG_EFI_LOADER=y && GENERATE_ACPI_TABLE=y.
A size of zero never makes sense for a bloblist.
When using QFW we need more than 64 KiB to host the ACPI table.
In this case CONFIG_BLOBLIST_ALLOC is used.
Set a reasonable default.
Remove the CONFIG_BLOBLIST_SIZE_RELOC in ARM QEMU defconfigs which are
not compatible with ACPI tables passed from QEMU.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Fixes: 6f9b015c13 ("common: Enable BLOBLIST_TABLES on arm")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
(cherry picked from commit 559f11e66c)
The push to GitHub fails because the shallow clone is missing objects
that the remote references. Disable shallow cloning for this job by
setting GIT_DEPTH to 0
Signed-off-by: Simon Glass <simon.glass@canonical.com>
When a patch is co-developed with an AI assistant, the Co-developed-by
tag typically uses a noreply email address. Since Signed-off-by requires
a real person with a valid email address, skip the name/email mismatch
warning when the Co-developed-by email contains "noreply@".
Cover-letter:
checkpatch: Sync with Linux v6.18
This series syncs checkpatch.pl with Linux v6.18 and adds several
U-Boot-specific improvements:
- Fix patman's checkpatch message parsing for consecutive messages
- Allow test macros (UNIT_TEST, etc.) immediately after function close
- Allow AI Co-developed-by tags without requiring matching Signed-off-by
END
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
U-Boot test declarations (e.g., FS_TEST, UNIT_TEST) should immediately
follow the closing brace of the test function with no blank line.
Add an exception to the blank-line-after-declaration check for *TEST
macros, and add a new check that warns if there IS a blank line before
a test declaration macro.
Update the patman test to handle duplicate warnings now that message
parsing correctly separates consecutive checkpatch messages.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Checkpatch.pl doesn't always output blank lines between messages. The
current parser splits on '\n\n' which fails to separate consecutive
messages, causing "Internal error: some problems lost" warnings.
Fix by splitting on message-starting patterns (ERROR:, WARNING:, CHECK:,
etc.) instead of blank lines.
Add a test that verifies consecutive messages are parsed correctly.
Co-developed-by: Claude <noreply@anthropic.com>
Signed-off-by: Simon Glass <simon.glass@canonical.com>
The function disable_thermal_cpu_nodes() corrupts the cooling-device
property.
For example, booting an i.MX93 devices with only one A55 core (IMX93x1)
with the cooling-device property set to:
$ dtc -I dtb foo.dtb | grep cooling-device
cooling-device = <0x08 0xffffffff 0xffffffff 0x09 0xffffffff 0xffffffff>;
Linux shows the following error at boot:
[ 1.715189] OF: /thermal-zones/cpu-thermal/cooling-maps/map0: could not find phandle 1083699869
[ 1.723977] thermal_sys: Add a cooling_device property with at least one device
[ 1.731285] thermal thermal_zone0: binding zone cpu-thermal with cdev thermal-devfreq-0 failed:-2
because the cooling-device property in the device tree passed to the
kernel is
$ dtc -I dtb /sys/firmware/fdt | grep cooling-device
cooling-device = <0x4097f29d 0x00 0xb05aef9d>;
The issue is because the wrong variable type is passed to the function
fdt_setprop() called in the function disable_thermal_cpu_nodes(). With
the variable type fixed, the error at boot is gone and the property is
properly set:
$ dtc -I dtb /sys/firmware/fdt | grep cooling-device
cooling-device = <0x08 0xffffffff 0xffffffff>;
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Capricorn boards have WDT (WDT_SIEMENS_PMIC) and U-Boot is not configured
to trigger the WDT. Enable the "wdt" command to be able to stop the WDT
from the command line.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Add instructions on how to build and package OP-TEE for the
phycore-imx8mm based boards. The build instructions are identical for
phyGATE-Tauri-L and phyBOARD-Polis.
Also fix missig '-' for TF-A build instructions.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add documentation for the phyBOARD-Pollux i.MX 8M Plus on OP-TEE
integration.
Also add missing '-' to TF-A build instruction while at it.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add tee node in SoC u-boot device trees. Use a kconfig entry to specify
load and entry addresses for the op-tee image in the respective
defconfig.
Default IMX8M_OPTEE_LOAD_ADDR is supplied. To keep it simple, the same
addresses are used for each SoC as are defined in upstream tf-a
(BL32_BASE) [1].
[1] https://github.com/ARM-software/arm-trusted-firmware/tree/master/plat/imx/imx8m
Signed-off-by: Yannic Moog <y.moog@phytec.de>
i.MX93-11x11-EVK has switched to use upstream device tree, and use
"adi,adp5585". Since i.MX93-11x11-EVK is the only user of this driver,
so it is safe to drop "adp5585".
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Enable dynamic settings to mmcdev and mmcroot for i.MX8MQ-EVK
Since we are here, clean up the including headers
Signed-off-by: Peng Fan <peng.fan@nxp.com>
