This file reads from the environment but does not include the correct
header. Update it.
Drop the unnecessary config.h while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
We don't need to include command.h just for this declaration. It
eventually pulls in linux/byteorder which causes a conflict with exfat
which has its own byteorder functions.
Use a forward declaration instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Demote "exFAT file system is not found" message to debug(). This is
printed when U-Boot attempts to auto-detect the filesystem via generic
filesystem API by attempting to mount the device, and fails to do so
because there is another filesystem in place. The libexfat-fuse code
prints this an error, which interferes with 'test_gpt' test. Demote
the message to debug().
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Fix the following conversion overflow errors. The UTF8-to-UTF16
conversion is done through 32bit wchar_t, but U-Boot codebase is
built with -fshort-wchar which limits wchar_t to 16bit. Replace
the built-in wchar_t with u32 to assure the intermediate type is
32bit.
"
fs/exfat/utf.c: In function ‘utf8_to_wchar’:
fs/exfat/utf.c:165:23: warning: overflow in conversion from ‘int’ to ‘wchar_t’ {aka ‘short unsigned int’} changes value from ‘(int)(short unsigned int)*input << 18 & 1835008’ to ‘0’ [-Woverflow]
165 | *wc = ((wchar_t) input[0] & 0x07) << 18;
| ^
fs/exfat/utf.c:170:23: warning: overflow in conversion from ‘int’ to ‘wchar_t’ {aka ‘short unsigned int’} changes value from ‘(int)(short unsigned int)*input << 24 & 50331648’ to ‘0’ [-Woverflow]
170 | *wc = ((wchar_t) input[0] & 0x03) << 24;
| ^
fs/exfat/utf.c:175:23: warning: overflow in conversion from ‘int’ to ‘wchar_t’ {aka ‘short unsigned int’} changes value from ‘(int)(short unsigned int)*input << 30 & 1073741824’ to ‘0’ [-Woverflow]
175 | *wc = ((wchar_t) input[0] & 0x01) << 30;
| ^
"
Signed-off-by: Marek Vasut <marex@denx.de>
Add U-Boot adjustments to the libexfat code and integrate
the result into U-Boot filesystem layer. This provides full
read-write exfat support for U-Boot available via generic
filesystem interface.
FS_DIRENT_NAME_LEN is increased to 1024 in case exfat is
enabled, because EXFAT can use UTF16 names, which do not
fit into current FS_DIRENT_NAME_LEN. To avoid affecting
every configuration, increase FS_DIRENT_NAME_LEN only in
case EXFAT is enabled.
Example usage via sandbox, assuming disk.img with one exfat partition:
Drive info:
$ ./u-boot -Tc 'host bind 0 ../disk.img ; host info 0'
dev blocks blksz label path
0 262144 512 0 ../disk.img
List files:
$ ./u-boot -Tc 'host bind 0 ../disk.img ; ls host 0:1 /api'
475 Kconfig
230 Makefile
1873 README
...
10 file(s), 0 dir(s)
Load and checksum a file:
$ ./u-boot -Tc 'host bind 0 ../disk.img ; load host 0:1 $loadaddr .config ; \
crc32 $loadaddr $filesize'
56724 bytes read in 1 ms (54.1 MiB/s)
crc32 for 00000000 ... 0000dd93 ==> b2e847c9
$ crc32 .config
b2e847c9
Load .config file to RAM, store the file into FS as /newconfig,
load the /newconfig into RAM and checksum the file:
$ ./u-boot -Tc 'host bind 0 ../disk.img ; load host 0:1 $loadaddr .config ; \
save host 0:1 $loadaddr /newconfig $filesize ; \
load host 0:1 0x10000 /newconfig ; \
crc32 0x10000 $filesize'
56724 bytes read in 1 ms (54.1 MiB/s)
56724 bytes written in 0 ms
56724 bytes read in 0 ms
crc32 for 00010000 ... 0001dd93 ==> b2e847c9
Remove file 3.txt and create new directory /newdir:
$ ./u-boot -Tc 'host bind 0 ../disk.img ; ls host 0:1 / ; \
rm host 0:1 3.txt ; mkdir host 0:1 /newdir ; \
ls host 0:1 /'
...
0 1.txt
0 2.txt
0 3.txt
0 4.txt
0 5.txt
7 file(s), 4 dir(s)
...
0 1.txt
0 2.txt
newdir/
0 4.txt
0 5.txt
6 file(s), 5 dir(s)
Acked-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Import most of libexfat from [1] except for log.c verbatim. The code
does not even compile and further adjustments and integration into
U-Boot filesystem code is in the next patch.
[1] https://github.com/relan/exfat
0b41c6d3560d ("CI: bump FreeBSD to 13.1.")
Acked-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Add generic implementation of write into a block device to be used
by filesystem implementations. This is a pair function for already
existing fs_devread().
Signed-off-by: Marek Vasut <marex@denx.de>
Add generic implementation of struct stat {} imported from Linux 6.13.y
commit 27560b371ab8 ("fs: pack struct kstat better"). This can be used
by filesystem code imported from elsewhere. Now struct stat {} becomes
available on all supported architectures.
Signed-off-by: Marek Vasut <marex@denx.de>
Add generic implementation of the 'rm' command to delete files
from filesystems using the generic filesystem API.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Add generic implementation of the 'mkdir' command to create directories
in filesystems using the generic filesystem API.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Gabriel Dalimonte <gabriel.dalimonte@gmail.com> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/20250217182648.31294-1-gabriel.dalimonte@gmail.com
Following the UEFI specification. The specification did not seem to
delineate if file_name was explicitly a file name only, or could
include paths to move the file to a different directory. The more
generous interpretation of supporting paths was selected.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
In order to support renaming via SetInfo(), path must allow for longer
values than what was originally present when file_handle was allocated.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
POSIX filesystem functions that create or remove directory entries contain
text along the lines of "[function] shall mark for update the last data
modification and last file status change timestamps of the parent
directory of each file." [1][2][3] The common theme is these timestamp
updates occur when a directory entry is added or removed. The
create_link() and delete_dentry_link() functions have been changed to
update the modification timestamp on the directory where the direntry
change occurs. This differs slightly from Linux in the case of rename(),
where Linux will not update `new_path`'s parent directory's timestamp if
it is replacing an existing file. (via `vfat_add_entry` [4])
The timestamps are not updated if the build configuration does not support
RTCs. This is an effort to minimize introducing erratic timestamps where
they would go from [current date] -> 2000-01-01 (error timestamp in the
FAT driver). I would assume an unchanged timestamp would be more valuable
than a default timestamp in these cases.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
[2] https://pubs.opengroup.org/onlinepubs/9799919799/functions/unlink.html
[3] https://pubs.opengroup.org/onlinepubs/9799919799/functions/open.html
[4] https://elixir.bootlin.com/linux/v6.12.6/source/fs/fat/namei_vfat.c#L682
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
The create_link() code was previously duplicated in two existing functions.
The two functions will be used in a future commit to achieve renaming.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
The generic filesystem interface was so far untested. The interface
is similar to the FS specific interfaces with FS specific prefixes,
like ext4ls, fatmkdir, ... but it does not have any prefixes, i.e.
it provides plain ls, mkdir, ... commands.
Extend the test parameters to include 'fs_cmd_prefix' and optionally
'fs_cmd_write' parameters. The 'fs_cmd_prefix' allow specifying the
filesystem specific command prefix, like 'ext4' in 'ext4ls'. The
'fs_cmd_write' allows selecting between 'write'/'save' command name
for storing files into the filesystem, see last paragraph.
Introduce new 'fs_generic' fs_type which is used to parametrize existing
tests and run them without any prefixes if detected, thus testing the
generic filesystem interface. Use the fatfs as the backing store for the
generic FS tests.
The check_ubconfig needs to be slightly adjusted to avoid test for
CMD_FS_GENERIC_WRITE which does not exist separately from CMD_FS_GENERIC.
The CMD_FS_GENERIC does not provide generic 'write' command, instead
the generic equivalent command is called 'save' . Add simple ternary
oeprator to use 'save' command for CMD_FS_GENERIC tests and '..write'
commands for filesystem specific tests.
Enable generic filesystem tests for basic/extended/mkdir/unlink tests.
Signed-off-by: Marek Vasut <marex@denx.de>
The header of the StarFive U-Boot SPL file u-boot-spl.normal.out has a
field indicating the payload size. When copying U-Boot SPL from a
partition the copied file might be too long.
Currently in this situation a misleading error message 'Incorrect CRC32' is
written.
We must use the payload size and not the file size when calculating the
CRC32.
Write a warning if the file is too long indicating the correct size. This
enables the user to truncate the file accordingly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
HOSTCFLAGS of some tools components (image-host, rsa-sign and
ecdsa-libcrypto) depend on the directory where openssl is installed.
Add them via pkg-config.
This fixes a potential build failure in tools when openssl in installed
in varied directories.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Dynamic memory, referenced by 'line', is allocated at imx8mimage.c:187
by calling function 'getline' and lost at imx8mimage.c:210.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Dynamic memory, referenced by 'line', is allocated at imx8image.c:270
by calling function 'getline' and lost at imx8image.c:294.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Dynamic memory, referenced by 'line', is allocated at imximage.c:761
by calling function 'getline' and lost at imximage.c:793.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
This reverts commit c8750efe02, reversing
changes made to 8c6cf8aeea.
Unfortunately these changes do not build on macOS hosts.
Signed-off-by: Tom Rini <trini@konsulko.com>
Return value of a function 'strtok_r' is dereferenced at kwbimage.c:1655
without checking for NULL, but it is usually checked for this function.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
The PRNG implementing the random() function only has 2^31 states and
therefore is unsafe to use for cryptography. Use arc4random() instead.
Fixes: cc34f04efd ("tools: image-host.c: use random instead of rand")
Addresses-Coverity-ID: 312953 Calling risky function
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Rather than have a requirements.txt file that's shared between multiple
python projects within U-Boot, create one for each using "pipreqs".
Signed-off-by: Tom Rini <trini@konsulko.com>
Use the "pipreqs" tool to re-create these files, with a few manual
corrections. We still need to include pytest-xdist which the tool does
not detect. We also for now don't upgrade most of the required tools as
that creates problems with various tests, which should be resolved
independently.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we have more requirements.txt files we need to grab all of them
for creating our cache. Also, we do longer should install
python3-pyelftools on the host as it's not used.
Signed-off-by: Tom Rini <trini@konsulko.com>
Dynamic memory, referenced by 'line', is allocated by calling
function 'calloc' and lost when the function terminates with code -1.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Report of the static analyzer:
1. NULL_AFTER_DEREF Pointer 'str', which is dereferenced at
image-host.c:688 by calling function 'strdup', is compared to a NULL
value at image-host.c:691.
2. NULL_AFTER_DEREF Pointer 'list', which is dereferenced at
image-host.c:689, is compared to a NULL value at image-host.c:691.
Corrections explained:
1. Checking for NULL before using pointers: The if (!list || !str) check
is now performed before calling strdup and realloc, which prevents
null pointer dereferences.
2. Checking the result of strdup: strdup can return NULL if memory
allocation fails. This also needs to be checked.
3. Checking the result of realloc: If realloc returns NULL, then memory
has not been allocated and dup must be freed to avoid memory leaks.
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
Dynamic memory, referenced by 'line', is allocated at ublimage.c:159
by calling function 'getline' and lost at ublimage.c:184.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
