Merge tag 'doc-2025-01-rc6' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request doc-2025-01-rc6

Fix a number of typos

* cmd: bootmenu typo 'read'
* cmd/rng: fix long help text
* crypto: typo volatge
* board: freescale: typo volatge
* scripts: add volatge to spelling.txt
* doc: fit: Format image tree source example

(cherry picked from commit cb7410257a)

board/freescale/ls1088a/ls1088a.c

@@ -690,7 +690,7 @@ int get_serdes_volt(void)
 	dm_i2c_read(dev, PMBUS_CMD_READ_VOUT, (void *)&vcode, 2);
 #endif
 	if (ret) {
-		printf("VID: failed to read the volatge\n");
+		printf("VID: failed to read the voltage\n");
 		return ret;
 	}
 
@@ -716,11 +716,11 @@ int set_serdes_volt(int svdd)
 				   (void *)&buff, 5);
 #endif
 	if (ret) {
-		printf("VID: I2C failed to write to the volatge regulator\n");
+		printf("VID: I2C failed to write to the voltage regulator\n");
 		return -1;
 	}
 
-	/* Wait for the volatge to get to the desired value */
+	/* Wait for the voltage to get to the desired value */
 	do {
 		vdd_last = get_serdes_volt();
 		if (vdd_last < 0) {
@@ -778,7 +778,7 @@ int set_serdes_volt(int svdd)
 		return -1;
 	}
 
-	/* Wait for the volatge to get to the desired value */
+	/* Wait for the voltage to get to the desired value */
 	udelay(10000);
 
 	return 1;

cmd/bootmenu.c

@@ -239,7 +239,7 @@ static int prepare_bootmenu_entry(struct bootmenu_data *menu,
 /**
  * prepare_uefi_bootorder_entry() - generate the uefi bootmenu entries
  *
- * This function read the "BootOrder" UEFI variable
+ * This function reads the "BootOrder" UEFI variable
  * and generate the bootmenu entries in the order of "BootOrder".
  *
  * @menu:	pointer to the bootmenu structure

cmd/rng.c

@@ -75,6 +75,6 @@ static int do_rng(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 U_BOOT_CMD(
 	rng, 3, 0, do_rng,
 	"print bytes from the hardware random number generator",
-	"list         - list all the probed rng devices\n"
-	"rng [dev] [n]    - print n random bytes(max 64) read from dev\n"
+	"list          - list all probed rng devices\n"
+	"rng [dev [n]] - print n random bytes (max 64) read from dev\n"
 );

configs/ls1028ardb_tfa_defconfig

@@ -67,6 +67,7 @@ CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
+CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
@@ -101,4 +102,3 @@ CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
-CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y

configs/rpi_3_b_plus_defconfig

@@ -10,6 +10,8 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b-plus"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 CONFIG_BOOTSTD_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_FDT_SIMPLEFB=y
@@ -55,5 +57,3 @@ CONFIG_VIDEO_BCM2835=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
 # CONFIG_HEXDUMP is not set
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y

configs/rpi_3_defconfig

@@ -10,6 +10,8 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 CONFIG_BOOTSTD_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_FDT_SIMPLEFB=y
@@ -55,5 +57,3 @@ CONFIG_VIDEO_BCM2835=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
 # CONFIG_HEXDUMP is not set
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y

configs/rpi_4_defconfig

@@ -10,6 +10,8 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 CONFIG_BOOTSTD_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_FDT_SIMPLEFB=y
@@ -68,5 +70,3 @@ CONFIG_VIDEO_BCM2835=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
 # CONFIG_HEXDUMP is not set
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y

configs/rpi_arm64_defconfig

@@ -8,6 +8,8 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 CONFIG_BOOTSTD_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_FDT_SIMPLEFB=y
@@ -62,5 +64,3 @@ CONFIG_VIDEO_BCM2835=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
 # CONFIG_HEXDUMP is not set
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y

doc/develop/release_cycle.rst

@@ -75,7 +75,7 @@ For the next scheduled release, release candidates were made on::
 
 * U-Boot v2025.01-rc4 was released on Mon 09 December 2024.
 
-.. * U-Boot v2025.01-rc5 was released on Mon 23 December 2024.
+* U-Boot v2025.01-rc5 was released on Mon 23 December 2024.
 
 .. * U-Boot v2025.01-rc6 was released on Mon 30 December 2024.
 

doc/usage/cmd/rng.rst

@@ -12,14 +12,14 @@ Synopsis
 ::
 
     rng list
-    rng [dev] [n]
+    rng [dev [n]]
 
 rng list
 --------
 
 List all the probed rng devices.
 
-rng [dev] [n]
+rng [dev [n]]
 -------------
 
 The *rng* command reads the random number generator(RNG) device and

doc/usage/fit/kernel_fdt.rst

@@ -5,50 +5,50 @@ Single kernel and FDT blob
 
 ::
 
-	/dts-v1/;
+    /dts-v1/;
 
-	/ {
-	description = "Simple image with single Linux kernel and FDT blob";
-	#address-cells = <1>;
+    / {
+        description = "Simple image with single Linux kernel and FDT blob";
+        #address-cells = <1>;
 
-	images {
-		kernel {
-		description = "Vanilla Linux kernel";
-		data = /incbin/("./vmlinux.bin.gz");
-		type = "kernel";
-		arch = "ppc";
-		os = "linux";
-		compression = "gzip";
-		load = <00000000>;
-		entry = <00000000>;
-		hash-1 {
-			algo = "crc32";
-		};
-		hash-2 {
-			algo = "sha256";
-		};
-		};
-		fdt-1 {
-		description = "Flattened Device Tree blob";
-		data = /incbin/("./target.dtb");
-		type = "flat_dt";
-		arch = "ppc";
-		compression = "none";
-		hash-1 {
-			algo = "crc32";
-		};
-		hash-2 {
-			algo = "sha256";
-		};
-		};
-	};
+        images {
+            kernel {
+                description = "Vanilla Linux kernel";
+                data = /incbin/("./vmlinux.bin.gz");
+                type = "kernel";
+                arch = "ppc";
+                os = "linux";
+                compression = "gzip";
+                load = <00000000>;
+                entry = <00000000>;
+                hash-1 {
+                    algo = "crc32";
+                };
+                hash-2 {
+                    algo = "sha256";
+                };
+            };
+            fdt-1 {
+                description = "Flattened Device Tree blob";
+                data = /incbin/("./target.dtb");
+                type = "flat_dt";
+                arch = "ppc";
+                compression = "none";
+                hash-1 {
+                    algo = "crc32";
+                };
+                hash-2 {
+                    algo = "sha256";
+                };
+            };
+        };
 
-	configurations {
-		default = "conf-1";
-		conf-1 {
-		description = "Boot Linux kernel with FDT blob";
-		kernel = "kernel";
-		fdt = "fdt-1";
-		};
-	};
-	};
+        configurations {
+            default = "conf-1";
+            conf-1 {
+                description = "Boot Linux kernel with FDT blob";
+                kernel = "kernel";
+                fdt = "fdt-1";
+            };
+        };
+    };

drivers/crypto/fsl/jr.c

@@ -654,7 +654,7 @@ static int rng_init(uint8_t sec_idx, ccsr_sec_t *sec)
 		ret = instantiate_rng(sec_idx, sec, gen_sk);
 		/*
 		 * entropy delay is calculated via self-test method.
-		 * self-test are run across different volatge, temp.
+		 * self-test are run across different voltage, temp.
 		 * if worst case value for ent_dly is identified,
 		 * loop can be skipped for that platform.
 		 */

scripts/spelling.txt

@@ -1584,6 +1584,7 @@ virtaul||virtual
 virtiual||virtual
 visiters||visitors
 vitual||virtual
+volatge||voltage
 vunerable||vulnerable
 wakeus||wakeups
 wathdog||watchdog