sunxi: Move to text environment

Convert these boards to use a text environment.

For the boards check, the only differences are extra spaces after the
semicolons in 'dfu_alt_info_ram' and 'partitions', both of which are
permitted.

Add in the special boot command for old kernels, dropping the
unnecessary and confusing hex prefixes.

Series-changes: 2
- Keep bootcmd_sunxi_compat if OLD_SUNXI_KERNEL_COMPAT is enabled

Series-to: u-boot
Series-cc: sunxi, trini
Series-version: 2
Series-links: 418453
Cover-letter:
bootstd: sunxi: Migrate to standard boot
This series attempts to migrate all sunxi boards to use standard boot,
along with a text environment.
END

Makefile

@@ -1844,6 +1844,7 @@ quiet_cmd_gen_envp = ENVP    $@
 		$(CPP) -P $(cpp_flags) -x assembler-with-cpp -undef \
 			-D__ASSEMBLY__ \
 			-D__UBOOT_CONFIG__ \
+			-DDEFAULT_DEVICE_TREE=$(subst ",,$(CONFIG_DEFAULT_DEVICE_TREE)) \
 			-I . -I include -I $(srctree)/include \
 			-include linux/kconfig.h -include include/config.h \
 			-I$(srctree)/arch/$(ARCH)/include \

arch/arm/Kconfig

@@ -1147,7 +1147,7 @@ config ARCH_SUNXI
 	select BINMAN
 	select CMD_GPIO
 	select CMD_MMC if MMC
-	select CMD_USB if DISTRO_DEFAULTS && USB_HOST
+	select CMD_USB if BOOTSTD_DEFAULTS && USB_HOST
 	select CLK
 	select DM
 	select DM_GPIO
@@ -1169,9 +1169,9 @@ config ARCH_SUNXI
 	select SUNXI_GPIO
 	select SYS_NS16550
 	select SYS_THUMB_BUILD if !ARM64
-	select USB if DISTRO_DEFAULTS
-	select USB_KEYBOARD if DISTRO_DEFAULTS && USB_HOST
-	select USB_STORAGE if DISTRO_DEFAULTS && USB_HOST
+	select USB if BOOTSTD_DEFAULTS
+	select USB_KEYBOARD if BOOTSTD_DEFAULTS && USB_HOST
+	select USB_STORAGE if BOOTSTD_DEFAULTS && USB_HOST
 	select SPL_USE_TINY_PRINTF if SPL
 	select USE_PREBOOT
 	select SYS_RELOC_GD_ENV_ADDR
@@ -1179,7 +1179,7 @@ config ARCH_SUNXI
 	imply CMD_DM
 	imply CMD_GPT
 	imply CMD_UBI if MTD_RAW_NAND
-	imply DISTRO_DEFAULTS
+	imply BOOTSTD_DEFAULTS
 	imply DM_REGULATOR
 	imply DM_REGULATOR_FIXED
 	imply FAT_WRITE

board/sunxi/sunxi.env

@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Common sunxi environment
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ /
+
+/****************************************************************************
+ *           environment variables holding default load addresses           *
+ ****************************************************************************/
+/*
+ * We cannot use expressions here, because expressions won't be evaluated in
+ * autoconf.mk.
+ */
+#ifdef CONFIG_ARM64
+/*
+ * Boards seem to come with at least 512MB of DRAM.
+ * The kernel should go at 512K, which is the default text offset (that will
+ * be adjusted at runtime if needed).
+ * There is no compression for arm64 kernels (yet), so leave some space
+ * for really big kernels, say 256MB for now.
+ * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
+ */
+#define BOOTM_SIZE        0xa000000
+#define KERNEL_ADDR_R     SDRAM_OFFSET(0080000)
+#define KERNEL_COMP_ADDR_R SDRAM_OFFSET(4000000)
+#define KERNEL_COMP_SIZE  0xb000000
+#define FDT_ADDR_R        SDRAM_OFFSET(FA00000)
+#define SCRIPT_ADDR_R     SDRAM_OFFSET(FC00000)
+#define PXEFILE_ADDR_R    SDRAM_OFFSET(FD00000)
+#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(FE00000)
+#define RAMDISK_ADDR_R    SDRAM_OFFSET(FF00000)
+
+#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 256)
+/*
+ * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
+ * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
+ */
+#define BOOTM_SIZE        0xa000000
+#define KERNEL_ADDR_R     SDRAM_OFFSET(2000000)
+#define FDT_ADDR_R        SDRAM_OFFSET(3000000)
+#define SCRIPT_ADDR_R     SDRAM_OFFSET(3100000)
+#define PXEFILE_ADDR_R    SDRAM_OFFSET(3200000)
+#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(3300000)
+#define RAMDISK_ADDR_R    SDRAM_OFFSET(3400000)
+
+#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 64)
+/*
+ * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
+ * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
+ */
+#define BOOTM_SIZE        0x2e00000
+#define KERNEL_ADDR_R     SDRAM_OFFSET(1000000)
+#define FDT_ADDR_R        SDRAM_OFFSET(1800000)
+#define SCRIPT_ADDR_R     SDRAM_OFFSET(1900000)
+#define PXEFILE_ADDR_R    SDRAM_OFFSET(1A00000)
+#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(1B00000)
+#define RAMDISK_ADDR_R    SDRAM_OFFSET(1C00000)
+
+#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 32)
+/*
+ * 32M RAM minus 2.5MB for u-boot, heap, stack, etc.
+ * 16M uncompressed kernel, 7M compressed kernel, 128K fdt, 64K script,
+ * 128K DT overlay, 128K PXE and the ramdisk in the rest (max. 5MB)
+ */
+#define BOOTM_SIZE        0x1700000
+#define KERNEL_ADDR_R     SDRAM_OFFSET(1000000)
+#define FDT_ADDR_R        SDRAM_OFFSET(1d50000)
+#define SCRIPT_ADDR_R     SDRAM_OFFSET(1d40000)
+#define PXEFILE_ADDR_R    SDRAM_OFFSET(1d00000)
+#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(1d20000)
+#define RAMDISK_ADDR_R    SDRAM_OFFSET(1800000)
+
+#else
+#error Need at least 32MB of DRAM. Please adjust load addresses.
+#endif
+
+#define UUID_GPT_ESP ""
+
+#ifdef CONFIG_ARM64
+#define UUID_GPT_SYSTEM b921b045-1df0-41c3-af44-4c6f280d3fae
+#else
+#define UUID_GPT_SYSTEM 69dad710-2ce4-4e3c-b16c-21a1d49abed3
+#endif
+
+stdin=serial
+#ifdef CONFIG_USB_KEYBOARD
+stdin+=,usbkbd
+#endif
+
+stdout=serial
+stderr=serial
+#ifdef CONFIG_VIDEO
+stdout+=,vidconsole
+stderr+=,vidconsole
+#endif
+
+bootm_size=BOOTM_SIZE
+kernel_addr_r=KERNEL_ADDR_R
+fdt_addr_r=FDT_ADDR_R
+scriptaddr=SCRIPT_ADDR_R
+pxefile_addr_r=PXEFILE_ADDR_R
+fdtoverlay_addr_r=FDTOVERLAY_ADDR_R
+ramdisk_addr_r=RAMDISK_ADDR_R
+
+#ifdef CONFIG_ARM64
+kernel_comp_addr_r=KERNEL_COMP_ADDR_R
+kernel_comp_size=KERNEL_COMP_SIZE
+#endif
+
+dfu_alt_info_ram=
+  kernel ram KERNEL_ADDR_R 0x1000000;
+  fdt ram FDT_ADDR_R 0x100000;
+  ramdisk ram RAMDISK_ADDR_R 0x4000000
+
+#ifdef CONFIG_ARM64
+fdtfile=allwinner/DEFAULT_DEVICE_TREE.dtb
+#else
+fdtfile=DEFAULT_DEVICE_TREE.dtb
+#endif
+
+console=ttyS0,115200
+
+uuid_gpt_esp=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+#ifdef CONFIG_ARM64
+uuid_gpt_system=b921b045-1df0-41c3-af44-4c6f280d3fae
+#else
+uuid_gpt_system=69dad710-2ce4-4e3c-b16c-21a1d49abed3
+#endif
+
+partitions=
+  name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};
+  name=loader2,size=984k,uuid=${uuid_gpt_loader2};
+  name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};
+  name=system,size=-,uuid=${uuid_gpt_system};
+
+/* support booting a very old kernel */
+#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
+bootcmd_sunxi_compat=
+  setenv root /dev/mmcblk0p3 rootwait;
+  if ext2load mmc 0 44000000 uEnv.txt; then
+          "echo Loaded environment from uEnv.txt;
+          "env import -t 44000000 ${filesize};
+  fi;
+  setenv bootargs console=${console} root=${root} ${extraargs};
+  ext2load mmc 0 43000000 script.bin &&
+  ext2load mmc 0 48000000 uImage &&
+  bootm 48000000
+#endif

boot/Kconfig

@@ -398,7 +398,7 @@ config BOOT_DEFAULTS
 menuconfig BOOTSTD
 	bool "Standard boot"
 	default y
-	depends on DM && OF_CONTROL && BLK
+	depends on DM && OF_CONTROL
 	help
 	  U-Boot supports a standard way of locating something to boot,
 	  typically an Operating System such as Linux, provided by a distro such
@@ -585,6 +585,20 @@ config BOOTMETH_EFI_BOOTMGR
 	  the EFI binary to be launched is determined. To set the EFI variables
 	  use the eficonfig command.
 
+config BOOTMETH_FEL
+	bool "Bootdev support for Sunxi FEL"
+	depends on ARCH_SUNXI
+	default y
+	help
+	  Enables support for booting over USB on a Sunxi device. This uses
+	  the FEL protocol and obtains the script address from the
+	  'fel_scriptaddr' environment variable.
+
+	  This method is only available if booting from FEL, i.e. the
+	  'fel_booted' environment variable is set.
+
+	  See https://linux-sunxi.org/FEL/Protocol for more information.
+
 config BOOTMETH_QFW
 	bool "Boot method using QEMU parameters"
 	depends on QFW

boot/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EXTLINUX) += bootmeth_extlinux.o
 obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EXTLINUX_PXE) += bootmeth_pxe.o
 obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EFILOADER) += bootmeth_efi.o
 obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_CROS) += bootm.o bootm_os.o bootmeth_cros.o
+obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_FEL) += bootmeth_fel.o
 obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_QFW) += bootmeth_qfw.o
 obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_SANDBOX) += bootmeth_sandbox.o
 obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_SCRIPT) += bootmeth_script.o

boot/bootdev-uclass.c

@@ -434,6 +434,9 @@ int bootdev_find_by_label(const char *label, struct udevice **devp,
 	struct uclass *uc;
 	enum uclass_id id;
 
+	if (!CONFIG_IS_ENABLED(BLK))
+		return -ENOSYS;
+
 	ret = label_to_uclass(label, &seq, &method_flags);
 	if (ret < 0)
 		return log_msg_ret("uc", ret);

boot/bootmeth_fel.c

@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Bootmethod for sunxi FEL loading
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#define LOG_CATEGORY UCLASS_BOOTSTD
+
+#include <bootdev.h>
+#include <bootflow.h>
+#include <bootmeth.h>
+#include <command.h>
+#include <dm.h>
+#include <env.h>
+
+static int fel_check(struct udevice *dev, struct bootflow_iter *iter)
+{
+	return 0;
+}
+
+static int fel_read_bootflow(struct udevice *dev, struct bootflow *bflow)
+{
+	if (!env_get("fel_booted") || !env_get("fel_scriptaddr"))
+		return -ENOENT;
+
+	bflow->state = BOOTFLOWST_READY;
+
+	return 0;
+}
+
+static int fel_read_file(struct udevice *dev, struct bootflow *bflow,
+			 const char *file_path, ulong addr, ulong *sizep)
+{
+	return -ENOSYS;
+}
+
+static int fel_boot(struct udevice *dev, struct bootflow *bflow)
+{
+	ulong addr;
+	int ret;
+
+	addr = env_get_hex("fel_scriptaddr", 0);
+	ret = cmd_source_script(addr, NULL, NULL);
+	if (ret)
+		return log_msg_ret("boot", ret);
+
+	return 0;
+}
+
+static int fel_bootmeth_bind(struct udevice *dev)
+{
+	struct bootmeth_uc_plat *plat = dev_get_uclass_plat(dev);
+
+	plat->desc = IS_ENABLED(CONFIG_BOOTSTD_FULL) ?
+	   "Sunxi FEL boot over USB" : "FEL";
+	plat->flags = BOOTMETHF_GLOBAL;
+
+	return 0;
+}
+
+static struct bootmeth_ops fel_bootmeth_ops = {
+	.check		= fel_check,
+	.read_bootflow	= fel_read_bootflow,
+	.read_file	= fel_read_file,
+	.boot		= fel_boot,
+};
+
+static const struct udevice_id fel_bootmeth_ids[] = {
+	{ .compatible = "u-boot,fel-bootmeth" },
+	{ }
+};
+
+U_BOOT_DRIVER(bootmeth_2fel) = {
+	.name		= "bootmeth_fel",
+	.id		= UCLASS_BOOTMETH,
+	.of_match	= fel_bootmeth_ids,
+	.ops		= &fel_bootmeth_ops,
+	.bind		= fel_bootmeth_bind,
+};

configs/gardena-smart-gateway-mt7688_defconfig

@@ -30,6 +30,7 @@ CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=655360
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
+# CONFIG_BOOTSTD is not set
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_STOP_STR="x"

doc/usage/environment.rst

@@ -87,6 +87,18 @@ settings. For example::
 
    #include <env/ti/mmc.env>
 
+Quotes are not supressed, for example::
+
+    fdtfile=CONFIG_DEFAULT_DEVICE_TREE.dtb
+    # produces: fdtfile="sun7i-a20-pcduino3.dtb"
+
+For this particular issue you can use DEFAULT_DEVICE_TREE instead::
+
+    fdtfile=DEFAULT_DEVICE_TREE.dtb
+    # produces: fdtfile=sun7i-a20-pcduino3.dtb
+
+There is no general way to remove quotes.
+
 If CONFIG_ENV_SOURCE_FILE is empty and the default filename is not present, then
 the old-style C environment is used instead. See below.
 

include/blk.h

@@ -197,7 +197,6 @@ static inline void blkcache_free(void) {}
 
 #endif
 
-#if CONFIG_IS_ENABLED(BLK)
 struct udevice;
 
 /* Operations on block devices */
@@ -278,6 +277,8 @@ struct blk_ops {
 #endif	/* CONFIG_BOUNCE_BUFFER */
 };
 
+#if CONFIG_IS_ENABLED(BLK)
+
 /*
  * These functions should take struct udevice instead of struct blk_desc,
  * but this is convenient for migration to driver model. Add a 'd' prefix
@@ -291,6 +292,8 @@ unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
 unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start,
 			 lbaint_t blkcnt);
 
+#endif /* BLK */
+
 /**
  * blk_read() - Read from a block device
  *
@@ -528,8 +531,10 @@ struct blk_desc *blk_get_by_device(struct udevice *dev);
  */
 int blk_get_desc(enum uclass_id uclass_id, int devnum, struct blk_desc **descp);
 
-#else
+#if !CONFIG_IS_ENABLED(BLK)
+
 #include <errno.h>
+
 /*
  * These functions should take struct udevice instead of struct blk_desc,
  * but this is convenient for migration to driver model. Add a 'd' prefix

include/configs/sunxi-common.h

@@ -61,242 +61,4 @@
 #define PHYS_SDRAM_0			CFG_SYS_SDRAM_BASE
 #define PHYS_SDRAM_0_SIZE		0x80000000 /* 2 GiB */
 
-/****************************************************************************
- *           environment variables holding default load addresses           *
- ****************************************************************************/
-/*
- * We cannot use expressions here, because expressions won't be evaluated in
- * autoconf.mk.
- */
-#ifdef CONFIG_ARM64
-/*
- * Boards seem to come with at least 512MB of DRAM.
- * The kernel should go at 512K, which is the default text offset (that will
- * be adjusted at runtime if needed).
- * There is no compression for arm64 kernels (yet), so leave some space
- * for really big kernels, say 256MB for now.
- * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
- */
-#define BOOTM_SIZE        __stringify(0xa000000)
-#define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(0080000))
-#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000))
-#define KERNEL_COMP_SIZE  __stringify(0xb000000)
-#define FDT_ADDR_R        __stringify(SDRAM_OFFSET(FA00000))
-#define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(FC00000))
-#define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(FD00000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
-#define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(FF00000))
-
-#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 256)
-/*
- * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
- * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
- * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
- */
-#define BOOTM_SIZE        __stringify(0xa000000)
-#define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(2000000))
-#define FDT_ADDR_R        __stringify(SDRAM_OFFSET(3000000))
-#define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(3100000))
-#define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(3200000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
-#define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(3400000))
-
-#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 64)
-/*
- * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
- * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
- * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
- */
-#define BOOTM_SIZE        __stringify(0x2e00000)
-#define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(1000000))
-#define FDT_ADDR_R        __stringify(SDRAM_OFFSET(1800000))
-#define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(1900000))
-#define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(1A00000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
-#define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(1C00000))
-
-#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 32)
-/*
- * 32M RAM minus 2.5MB for u-boot, heap, stack, etc.
- * 16M uncompressed kernel, 7M compressed kernel, 128K fdt, 64K script,
- * 128K DT overlay, 128K PXE and the ramdisk in the rest (max. 5MB)
- */
-#define BOOTM_SIZE        __stringify(0x1700000)
-#define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(1000000))
-#define FDT_ADDR_R        __stringify(SDRAM_OFFSET(1d50000))
-#define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(1d40000))
-#define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(1d00000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1d20000))
-#define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(1800000))
-
-#else
-#error Need at least 32MB of DRAM. Please adjust load addresses.
-#endif
-
-#define MEM_LAYOUT_ENV_SETTINGS \
-	"bootm_size=" BOOTM_SIZE "\0" \
-	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
-	"fdt_addr_r=" FDT_ADDR_R "\0" \
-	"scriptaddr=" SCRIPT_ADDR_R "\0" \
-	"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
-	"fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \
-	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
-
-#ifdef CONFIG_ARM64
-#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \
-	"kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \
-	"kernel_comp_size=" KERNEL_COMP_SIZE "\0"
-#else
-#define MEM_LAYOUT_ENV_EXTRA_SETTINGS ""
-#endif
-
-#define DFU_ALT_INFO_RAM \
-	"dfu_alt_info_ram=" \
-	"kernel ram " KERNEL_ADDR_R " 0x1000000;" \
-	"fdt ram " FDT_ADDR_R " 0x100000;" \
-	"ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
-
-/****************************************************************************
- *                  definitions for the distro boot system                  *
- ****************************************************************************/
-#ifdef CONFIG_MMC
-#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
-#define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance)		\
-	BOOTENV_DEV_MMC(MMC, mmc, 0)					\
-	BOOTENV_DEV_MMC(MMC, mmc, 1)					\
-	"bootcmd_mmc_auto="						\
-		"if test ${mmc_bootdev} -eq 1; then "			\
-			"run bootcmd_mmc1; "				\
-			"run bootcmd_mmc0; "				\
-		"elif test ${mmc_bootdev} -eq 0; then "			\
-			"run bootcmd_mmc0; "				\
-			"run bootcmd_mmc1; "				\
-		"fi\0"
-
-#define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
-	"mmc_auto "
-
-#define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
-#else
-#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
-#endif
-#else
-#define BOOT_TARGET_DEVICES_MMC(func)
-#endif
-
-#ifdef CONFIG_AHCI
-#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
-#else
-#define BOOT_TARGET_DEVICES_SCSI(func)
-#endif
-
-#ifdef CONFIG_USB_STORAGE
-#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
-#else
-#define BOOT_TARGET_DEVICES_USB(func)
-#endif
-
-#ifdef CONFIG_CMD_PXE
-#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
-#else
-#define BOOT_TARGET_DEVICES_PXE(func)
-#endif
-
-#ifdef CONFIG_CMD_DHCP
-#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
-#else
-#define BOOT_TARGET_DEVICES_DHCP(func)
-#endif
-
-/* FEL boot support, auto-execute boot.scr if a script address was provided */
-#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
-	"bootcmd_fel=" \
-		"if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
-			"echo '(FEL boot)'; " \
-			"source ${fel_scriptaddr}; " \
-		"fi\0"
-#define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
-	"fel "
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(FEL, fel, na) \
-	BOOT_TARGET_DEVICES_MMC(func) \
-	BOOT_TARGET_DEVICES_SCSI(func) \
-	BOOT_TARGET_DEVICES_USB(func) \
-	BOOT_TARGET_DEVICES_PXE(func) \
-	BOOT_TARGET_DEVICES_DHCP(func)
-
-#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
-#define BOOTCMD_SUNXI_COMPAT \
-	"bootcmd_sunxi_compat=" \
-		"setenv root /dev/mmcblk0p3 rootwait; " \
-		"if ext2load mmc 0 0x44000000 uEnv.txt; then " \
-			"echo Loaded environment from uEnv.txt; " \
-			"env import -t 0x44000000 ${filesize}; " \
-		"fi; " \
-		"setenv bootargs console=${console} root=${root} ${extraargs}; " \
-		"ext2load mmc 0 0x43000000 script.bin && " \
-		"ext2load mmc 0 0x48000000 uImage && " \
-		"bootm 0x48000000\0"
-#else
-#define BOOTCMD_SUNXI_COMPAT
-#endif
-
-#include <config_distro_bootcmd.h>
-
-#ifdef CONFIG_USB_KEYBOARD
-#define CONSOLE_STDIN_SETTINGS \
-	"stdin=serial,usbkbd\0"
-#else
-#define CONSOLE_STDIN_SETTINGS \
-	"stdin=serial\0"
-#endif
-
-#ifdef CONFIG_VIDEO
-#define CONSOLE_STDOUT_SETTINGS \
-	"stdout=serial,vidconsole\0" \
-	"stderr=serial,vidconsole\0"
-#else
-#define CONSOLE_STDOUT_SETTINGS \
-	"stdout=serial\0" \
-	"stderr=serial\0"
-#endif
-
-#define PARTS_DEFAULT \
-	"name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
-	"name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
-	"name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
-	"name=system,size=-,uuid=${uuid_gpt_system};"
-
-#define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
-
-#ifdef CONFIG_ARM64
-#define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
-#else
-#define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
-#endif
-
-#define CONSOLE_ENV_SETTINGS \
-	CONSOLE_STDIN_SETTINGS \
-	CONSOLE_STDOUT_SETTINGS
-
-#ifdef CONFIG_ARM64
-#define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
-#else
-#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
-#endif
-
-#define CFG_EXTRA_ENV_SETTINGS \
-	CONSOLE_ENV_SETTINGS \
-	MEM_LAYOUT_ENV_SETTINGS \
-	MEM_LAYOUT_ENV_EXTRA_SETTINGS \
-	DFU_ALT_INFO_RAM \
-	"fdtfile=" FDTFILE "\0" \
-	"console=ttyS0,115200\0" \
-	"uuid_gpt_esp=" UUID_GPT_ESP "\0" \
-	"uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
-	"partitions=" PARTS_DEFAULT "\0" \
-	BOOTCMD_SUNXI_COMPAT \
-	BOOTENV
-
 #endif /* _SUNXI_COMMON_CONFIG_H */