The content of CONFIG_OF_SPL_REMOVE_PROPS is the same in both
STM32MP15xx DHCOM and DHCOR defconfigs, deduplicate the content
into stm32mp15_dhsom.config .
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
(cherry picked from commit 5470a6a0b1)
The access-controllers DT property is not useful in STM32MP15xx SPL,
remove it to reduce SPL control DT size. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
(cherry picked from commit 72c6a40fad)
Commit 2a00d73d08 ("spl: mmc: Try to clean up raw-mode options")
broke booting from SD card on STM32MP15xx , reinstate raw mode SD
boot configuration options and select the correct raw mode partition
for STM32MP15xx to fix SD boot on STM32MP15xx DHSOM.
Fixes: 2a00d73d08 ("spl: mmc: Try to clean up raw-mode options")
Reported-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
(cherry picked from commit dae1f13daa)
The root oscillators reference used to be in rcc node since
3d15245502 ("ARM: dts: stm32mp1: explicit clock reference needed by RCC clock driver")
however this is not part of upstream stm32mp151.dtsi . The
RCC driver does need this reference, reinstate it locally.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
(cherry picked from commit b651906122)
The root oscillators reference used to be in rcc node since
3d15245502 ("ARM: dts: stm32mp1: explicit clock reference needed by RCC clock driver")
however this is not part of upstream stm32mp151.dtsi . The
RCC driver does need this reference, reinstate it globally.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
(cherry picked from commit edc425ef16)
Since commit 6534d26ee9 ("lmb: do away with arch_lmb_reserve()"),
STM32F746-disco hangs when loading device tree just before starting
kernel:
Retrieving file: /stm32f746-disco.dtb
Kernel image @ 0xc0008000 [ 0x000000 - 0x19ae00 ]
Flattened Device Tree blob at c0408000
Booting using the fdt blob at 0xc0408000
Working FDT set to c0408000
Loading Device Tree to c05f8000, end c05ff71c ...
Adjust STACK_SIZE to 16KB for STM32 MCUs (F4/F7 and H7) boards
to fix kernel boot process as some of these boards embeds a limited
amount of memory.
Fixes: 6534d26ee9 ("lmb: do away with arch_lmb_reserve()")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
(cherry picked from commit d4ce588515)
Previously, all LMB marked with LMB_NOMAP (above and below ram_top)
are considered as invalid entry in TLB.
Since commit 1a48b0be93 ("lmb: prohibit allocations above ram_top
even from same bank") all LMB located above ram_top are now marked
LMB_NOOVERWRITE and no more LMB_MAP.
This area above ram_top is reserved for OPTEE and must not be cacheable,
otherwise this leads to a Panic on some boards (Issue on STM32MP135F-DK).
Restore previous behavior by marking invalid entry all TLB above ram_top.
Fixes: 1a48b0be93 ("lmb: prohibit allocations above ram_top even from same bank")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
cc: Sughosh Ganu <sughosh.ganu@linaro.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
(cherry picked from commit 25fb58e88a)
I have an original rpi installed now, loaded with OS Lite (32-bit)
Add an entry for it so that it can be used for testing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
(cherry picked from commit 1cde96bee5)
This patch was written before the XPL change-over. Update the Makefile
condition to the new way.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: ae3b5928d6 ("x86: coreboot: Allow building an expo for...")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
(cherry picked from commit 315fd02729)
The logic in get_details() retrieves the default source directory from
the Labgrid settings. This is convenient for interactive use, since it
allows pytests to be run from any directory and still find the source
tree.
However, it is not actually correct.
Gitlab sets the current directory to the source tree and expects that to
be used. At present it is ignored. The result is that Gitlab builds
whatever happens to be in the default source directory, ignoring the
tree it is supposed to be building.
Fix this by using the directory of the source tree, always. This is
obtained by looking at the grandparent of the conftest.py file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
Fixes: bf89a8f1fc ("test: Introduce the concept of a role")
Tested-by: Tom Rini <trini@konsulko.com>
(cherry picked from commit a8f09d6282)
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
